Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Optical and Chemical Methods of Metal Ash Analysis and Tin Recovery

‘Metal ash’ presents a waste disposal problem in most of the developing countries as the industries employ obsolete technologies. In this paper we describe analysis of tin ash, zinc ash and aluminium ash by means of optical methods, such as X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), electron probe micro analysis (EPMA), scanning electron microscopy (SEM) and chemical methods. The results of tin ash obtained by XRD method matched well with the cassiterite, a naturally occurring mineral of tin. ICP-MS studies reveal the presence of a large number of tracer metals, which may cause pollution by tertiary dispersion and this aspect is discussed. Conversely, the data generated by chemical methods are limited. However, the methods are simple and cost-effective. Then, they can easily be adopted by low-budget industries. Simple and cost-effective process to recover tin from tin ash is described. It is based on heating tin ash with sodium cyanide to about 900°C to separate tin component from the metal ash. The process recovers good quality tin and offers a very high yield. The process can be scaled up to small pilot plant.     

Analysis of cadmium, nickel, and lead in commercial moist and dry snuff used in Pakistan

The extent to which smokeless tobacco endangers human health is an ongoing subject of debate. In this study, concentrations of toxic metals, cadmium (Cd), lead (Pb), and nickel (Ni), were measured in different snuff products (dry brown and black and moist green and brown), available and consumed in Pakistan. Concentrations of Cd, Pb, and Ni were determined in 23 samples of various brands of snuff by electrothermal atomic absorption spectrometry, after microwave-assisted acid digestion. The reliability of methodology was assured by analyzing certified reference material. The resulted data of toxic metals in different snuff products are comparable to the existing information with limited exceptions. It was estimated that 10 g intake of different types of snuff could contribute 14–68, 17–47, and 20–73 % of the provisional maximum tolerable daily intake for Cd, Ni, and Pb, respectively.     

Production and characterization of biodiesel from Eriobotrya Japonica seed oil: an optimization study

Biodiesel is now-a-days recognized as a real potential alternative to petroleum-derived diesel fuel due to its number of desirable characteristics. However, its higher production cost resulting mainly due to use of costly food-grade vegetable oils as raw materials is the major barrier to its economic viability. Present work is an attempt to explore the potential of Eriobotrya japonica seed oil for the synthesis of biodiesel using alkali-catalyzed transesterification. Optimization of production parameters, namely molar ratio of alcohol to oil, amount of catalyst, reaction time and temperature, was carried out using Taguchi method. Fatty acid composition of both oil and biodiesel was determined using GC and H¹ NMR. Alcohol to oil molar ratio of 6:1, catalyst amount of 1% wt/wt, 2 h reaction time and 50 ^°C reaction temperature were found to be the optimum conditions for obtaining 94.52% biodiesel. Highest % contribution was shown by the ‘amount of catalyst’ (67.32%) followed by molar ratio of alcohol to oil (25.51%). Major fuel properties of E. japonica methyl esters produced under optimum conditions were found within the specified limits of ASTM D6751 for biodiesel, hence it may be considered a prospective substitute of petro-diesel.     

Bioefficacy evaluation of controlled release formulations based on amphiphilic nano-polymer of carbofuran against Meloidogyne incognita infecting tomato

In the present investigation, the bioefficacy of developed carbofuran formulations, with PEG-600 (7a, CP1) & PEG-900 (7b, CP2) @ 5, 10 and 20 ppm, along with commercial formulation of carbofuran 3G (CP0) were evaluated against the root-knot nematode, Meloidogyne incognita infecting tomato (cv. Pusa Ruby) in pot and field conditions. The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG - 900 (7b) as hydrophilic segment were effective even at 14 days post inoculation (dpi) as evident from shoot and root length. Also, the reduction in penetration was found to be maximum with CP2 (3.6 - 4.6 J2s) at all concentrations compared to CP1 (6.6-16.4 J2s) and CP0 (29.3-32.6 J2s). Overall, CP2 was more effective in reducing the number of nematodes up to 14 days, compared to CP1 and CP0. Both the CR formulations (CP1 and CP2) in general significantly reduced the number of galls, when compared to CP0. However, under field conditions, lower concentrations (5, and 10 ppm) of CP2, were less effective in controlling the gall formation whereas, CP2 at 20 ppm, was most effective than other treatments. The study revealed that the developed CR formulations of carbofuran have the potential for effective management of M. incognita in tomato under field conditions.     

Phyto-management of Cr-contaminated soils by sunflower hybrids: physiological and biochemical response and metal extractability under Cr stress

Environmental Science and Pollution Research - Chromium (Cr) is a biologically non-essential, carcinogenic and toxic heavy metal. The cultivation of Cr-tolerant genotypes seems the most favorable...     

Land-use change and its socio-environmental impact in Eastern Ethiopia’s highland

The Alemaya district (Eastern Ethiopian highlands) is characterized by undulating physiographic features with arid, semi-arid, and humid climatic conditions. This study evaluated socio-environmental changes in land use and land cover during 1985–2011. Screen digitization on remotely sensed data (i.e., Landsat images from 1985 to 2011) was performed to produce 10 classes of land use and land cover. Then, final land-use maps were prepared using a geographic information system following field verification and accuracy assessment. The drying of water bodies, including the prominent lakes Alemaya, Adele, and Tinike, had been the most important environmental change observed. Degraded land, marsh, perennial cropland, and residential areas increased by 37, 438, 42, and 190 %, respectively, whereas grassland, plantation, shrubland, and temporal cropland decreased by 64, 11, 63, and 29 %, respectively. The increase in land degradation (+37 %), the other major observed problem, has made large areas unsuitable for agriculture and has reduced crop productivity. These land-use and land-cover changes have affected both the environment and the livelihoods of local residents; especially the issue related to land degradation requires urgent attention.     

Correction to: Radical scavenging and antiproliferative effect of novel phenolic derivatives isolated from Nerium indicum against human breast cancer cell line (MCF-7)—an in silico and in vitro approach

Environmental Science and Pollution Research - The correct presentation of the Author names are shown in this paper.     

Trilemma association of energy consumption,carbon emission,and economic growth of BRICS and OECD regions: quantile regression estimation

Environmental Science and Pollution Research - Recent research has shown a huge impact of non-renewable energy (NRE) production on environmental health. In this context, this work analyzes the...     

Impact of economic policy uncertainty on CO2 emissions: evidence from top ten carbon emitter countries

Environmental Science and Pollution Research - Over the last few decades, economic policy uncertainty (EPU) has surged across the globe. Furthermore, EPU affects economic activities, which may also...