The Effects of Infiltration and Insulation on the Source Strengths and Indoor Air Pollution from Combustion Space Heating Appliances

Many energy conservation strategies for residences involve reducing house air exchange rates. Reducing the air exchange rate of a house can cause an increase in pollutant levels if there is an indoor pollution source and if the indoor pollutant source strength remains constant. However, if the indoor pollutant source strength can also be reduced, then it is possible to maintain or even improve indoor air quality. Increasing the insulation level of a house is a means of achieving energy conservation goals and, in addition, can reduce the need for space heating and thereby reduce the pollutant source strengths of combustion space heaters such as unvented kerosene space heaters, unvented gas space heaters, and wood stoves. In this paper, the indoor air quality trade-off between reduced infiltration and increased insulation in residences is investigated for combustion space heaters. Two similar residences were used for the experiment. One residence was used as a control and the other residence had infiltration and insulation levels modified. An unvented propane space heater was used as the source in this study. A model was developed to describe the dependence of both indoor air pollution levels and the appliance source strengths on house air exchange rates and house insulation levels. Model parameters were estimated by applying regression techniques to the data. Results show that indoor air pollution levels in houses with indoor combustion space heating pollution sources can be held constant (or lowered) by reducing the thermal conductance by an amount proportional to (or greater than) the reduction of the air exchange rate.     

Queen and young larval pheromones impact nursing and reproductive physiology of honey bee (Apis mellifera) workers

Several insect pheromones are multifunctional and have both releaser and primer effects. In honey bees (Apis mellifera), the queen mandibular pheromone (QMP) and e-beta-ocimene (eβ), emitted by young worker larvae, have such dual effects. There is increasing evidence that these multifunctional pheromones profoundly shape honey bee colony dynamics by influencing cooperative brood care, a fundamental aspect of eusocial insect behavior. Both QMP and eβ have been shown to affect worker physiology and behavior, but it has not yet been determined if these two key pheromones have interactive effects on hypopharyngeal gland (HPG) development, actively used in caring of larvae, and ovary activation, a component of worker reproductive physiology. Experimental results demonstrate that both QMP and eβ significantly suppress ovary activation compared to controls but that the larval pheromone is more effective than QMP. The underlying reproductive anatomy (total ovarioles) of workers influenced HPG development and ovary activation, so that worker bees with more ovarioles were less responsive to suppression of ovary activation by QMP. These bees were more likely to develop their HPG and have activated ovaries in the presence of eβ, providing additional links between nursing and reproductive physiology in support of the reproductive ground plan hypothesis.     

Enhanced nutrient removal by oxidation-reduction potential (ORP) control in laboratory-scale extended aeration reactors

A study was conducted to examine N and P removal by a laboratory-scale extended aeration treatment system employing oxidation-reduction potential (ORP) controlled aeration. The system was provided with a 90-L aeration tank. When ORP controlled aeration was applied, the aeration tank was divided into three zones, namely the ORP zone (45 L), the anaerobic zone (27 L) and the aerobic zone (18 L). An external anoxic selector of 3.8 L in volume was also added. An ORP set point of 70 mV was used for the ORP zone. The extended aeration treatment system operating without the ORP controlled aeration was used as the control.COD removal (97%) was not affected, but both N and P removal were enhanced significantly in the ORP reactor. Total N removal efficiency was increased from 49.1% (control) to 83.5%. Almost all P was captured (99%), leaving an average of 0.09 mg L⁻¹ P in the effluent. The ORP reactor yielded a sludge P content of 3.1%, compared to only 1.8% for the control. This indicated luxury P uptake in ORP reactor. Very significant P release and denitrification were found in the anoxic selector. Fairly good simultaneous nitrification and denitrification had occurred in the ORP zone. However, P release was very limited in the anoxic zone. However, anoxic P uptake and nitrification were found in this zone.Low F/M bulking was observed in both the control and ORP operation before the installation of a selector. Bacterial Type 0041 was identified as the predominant bulking organism. For the Control, an aerobic selector cured the bulking problem in one sludge age while an anoxic selector fixed up the problem during the ORP operation.     

Regional economic conditions and crash fatality rates--a cross-county analysis

INTRODUCTION: Most studies that evaluate the relationship between economic conditions and traffic fatalities focus on the time-series relationship between the two factors. This analysis considers the cross-sectional perspective by estimating the cross-county correlation between per capita income and fatalities per vehicle mile traveled (VMT) in Ohio. METHOD: The empirical model employed in this analysis allows for interaction effects between per capita income and highway usage, in the determination of fatality rates. RESULTS: The resultant least squares estimates indicate that a significant interaction effect exists between per capita income and the percentage of highway VMT, indicating a nonlinear correlation between per capita income and fatality rates. This correlation rises as the proportion of VMT on highways rises, such that there is an inverse relationship with fatality rates when the highway share of county VMT is low and a direct relationship with fatality rates when the highway share of county VMT is high. Additionally, population density, the presence of interstate highways in rural counties, the prior prevalence of severe alcohol abuse, and the proportion of teen drivers all proved to be significant correlates with county fatality rates. CONCLUSIONS: These observations suggest factors that state and federal policy makers should consider when allocating resources that impact (whether directly or indirectly) traffic fatalities.     

The impact of state level behavioral regulations on traffic fatality rates

Introduction

A state by year panel is analyzed to simultaneously explore the statistical correlation between state level traffic fatality rates and state level behavioral regulations regarding teen licensing, seat belt use, and driving under the influence (DUI) in a model that also controls for other correlates.

Method

By including measures of all three of these policies, the estimated policy effects should not be overstated due to underspecification bias. The panel includes the 48 contiguous U.S. states for the time period from 1999 through 2003. State fatality rates are measured as fatalities per million miles traveled. Measures of state policies regarding traffic safety related behavior are based on information gathered by the Insurance Institute for Highway Safety. Estimates are calculated via a time fixed effects model that uses the double-log form to allow for interaction effects between the independent variables.

Results

Least squares estimates indicate that, on average, more restrictive graduated teen licensing and DUI policies significantly reduce traffic fatality rates, while stricter seat belt enforcement policies have a statistically insignificant negative impact on fatality rates.     

Pollutant emission rates from indoor combustion appliances and sidestream cigarette smoke

Particulate and gaseous emissions from indoor combustion appliances and smoking can elevate the indoor concentrations of various pollutants. Indoor pollutant concentrations resulting from operating one of several combustion appliances, or from sidestream tobacco smoke, were measured in a 27-m³ environmental chamber under varying ventilation rates. The combustion appliances investigated were gas-fired cooking stoves, unvented kerosene-fired space heaters, and unvented natural-gas-fired space heaters. Results showed elevated levels of carbon dioxide, carbon monoxide, nitric oxide, nitrogen dioxide, formaldehyde, and suspended particles from one or more of the pollutant sources investigated. Our findings suggest that, of the sources examined in this study, nitrogen dioxide from combustion appliances and particles from sidestream cigarette smoke are the most serious contaminants of indoor air, if we use existing standards and guidelines as the criteria. An emission rate model was used to quantify the strengths of the pollutant sources, which are reported in terms of the mass of pollutant emitted per energy unit of fuel consumed (in the case of gas and kerosene appliances) and per mass of tobacco combusted (in the case of smoking).     

The effects of ventilation on residential air pollution due to emissions from a gas-fired range

The use of indoor combustion appliances can cause an increase in the levels of many different pollutants. The work presented here shows the usefulness of a model for extrapolating environmental chamber results on pollutant emissions from combustion appliances to determine indoor pollutant concentrations in actual residences. In addition, the effects of infiltration, whole-house ventilation, and spot ventilation on pollutant levels are investigated. The results show that a range hood is the most effective means of removing pollutants emitted from a gas-fired range; removal rates varied from 60% to 87%.