Water,sanitation, hygiene and waste disposal practices as COVID-19 response strategy: insights from Bangladesh

Environment, Development and Sustainability - The COVID-19 pandemic has caused a global emergence, and the absence of a proven vaccine or medicine has led to the implementation of measures to...     

Revisiting the environmental Kuznets curve: evidence from Turkey

Environment, Development and Sustainability - This paper uncovers the link between economic development and environmental degradation in Turkey by employing two distinct methods. We test the...     

Evaluation of pesticides multiresidue contamination of khat leaves from Jazan region,Kingdome Saudi Arabia,using solid-phase extraction – gas chromatography/mass spectrometry

The habit of khat chewing is widespread with a deep-rooted sociocultural tradition in these regions and as such poses a public health problem. The use of pesticides is considered to be indispensable practice for the production of adequate food supply for the increasing demands by the global population and for control of insect-borne diseases. Thus, contamination of the environment with pesticides and entry of these chemicals into the food chain is unavoidable especially in developing countries. The main objective of our current study was to assess pesticide pollution of khat leaves (unknown origin) obtained while being smuggled into the Kingdom of Saudi Arabia and to be used in Jazan area. A total of 120 khat leaf samples were extracted using solid-phase extraction followed by gas chromatography/mass spectrometry analysis for the presence of 69 standard pesticides using an internal standard, tiphenyl phosphate. No pesticide residues were detected in all the studied samples. These data as preliminary and more experiments need to be performed to confirm our present findings. Routine monitoring of the pesticide residues is important for the prevention, control, and reduction of environmental pollution and also for legal decisions to minimize health risks.     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Hybrid Composites Made from Oil Palm Empty Fruit Bunches/Jute Fibres: Water Absorption,Thickness Swelling and Density Behaviours

In this research, hybrid composite materials were prepared from combination of oil palm Empty fruit bunches (EFB) fibre and jute fibre as reinforcement, epoxy as polymer matrix. This study intended to investigate the effect of jute fiber hybridization and different layering pattern on the physical properties of oil palm EFB-Epoxy composites. Water absorption and thickness swelling test reveal that hybrid composite shows a moderate water absorption which is 11.20% for hybrid EFB/Jute/EFB composite and 6.08% for hybrid Jute/EFB/Jute composite. The thickness swelling and water absorption of the hybrid composites slightly increased as the layering pattern of hybrid composites changed. Hybrid composites are more water resistance and dimensional stable compare to the pure EFB composites. This is attributed to the more hydrophilic nature of EFB composites. Hybridization of oil palm EFB composites with jute fibres can improve the dimensional stability and density of pure EFB and Jute fibre reinforced composites has higher density of 1.2 g/cm³ compared to all other composites.     

Mechanical Properties of Layered Laminated Woven Bamboo <Emphasis Type="Italic">Gigantochloa Scortechinii</Emphasis>/Epoxy Composites

This study investigated the application of bamboo as a natural composite, in which its potential as a composite material had been examined for 2–6 layers. In precise, the woven bamboo (BW) formed the culm fiber composite with an average of 0.5 mm thickness and 5.0 mm width strip. In addition, this study looked into a specific type of bamboo species known as Gigantochloa Scortechinii (Buluh Semantan), which can be found in Malaysia. This laminated plain BW, which had been reinforced with epoxy (EP), was developed by applying the hand lay-up technique. After that, the specimens were characterized via mechanical analyses, for instance, tensile, flexural, hardness, and impact tests. As a result, the 2-layer BW had displayed rather excellent results chiefly due to the incorporation of epoxy composite, although this is exceptional hardness value.     

Improved desalination by polyamide membranes containing hydrophilic glutamine and glycine

Environmental Chemistry Letters - Water desalination and recycling of wastewater is a key challenge to meet water shortage issues. Thin film composite polyamide membranes are widely used for...     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Non-timber forest products and village livelihoods in Rajasthan,India: adaptation in a changing environment

This paper presents the results of research conducted between 2009 and 2014 in the village of Khanda Sharol in the state of Rajasthan, India. Our research objective was to determine how the livelihoods of village residents have been affected by the intensification of forest use, and the resulting loss of domestic access to traditionally used forest resources. Results indicate that changes in forest cover have resulted in a loss of livelihood options for village residents. Yet rather than being victimized by environmental change processes, this paper shows how villagers have responded by partnering with public and private actors to develop a community protected forest area that is now helping villagers to meet their livelihood needs. These findings suggest that sustainable livelihoods in rural regions of India require committed and scaled approaches involving local, public, and private actors.