聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂对Cd2+吸附性能研究

制备了一种聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂,重点考察了吸附剂对Cd2+吸附的pH依赖性、吸附动力学和吸附等温线.结果表明,Cd2+溶液pH值对吸附容量有较大影响.在pH=8、吸附时间30 min、Cd2+溶液初始浓度0.02 mol/L和吸附剂用量0.10 g的条件下,吸附剂对Cd2+的饱和吸附量可达294.7 mg/g.与膨润土相比,三维网络凝胶吸附剂具有更高的吸附容量和更快的吸附速率.     

新型活性污泥的培养及其处理高盐有机废水

在好氧反应器中,将海泥通过海水和营养物质培养成新型的活性污泥,在处理含盐废水时有较好的活性和沉降性能,对这种新型的活性污泥我们称其为海洋活性污泥。通过10周的培养,海泥的污泥体积指数（SVI）从最初的19 mL/g升高到70 mL/g,对有机废水处理12 h后高锰酸盐指数（CODMn）降解率达到90%,氨氮降解率达到45%。在污泥培养时,营养物质投加频率为一日一次最有利于污泥的培养,又葡萄糖比淀粉更有利于污泥的培养。对于含盐有机废水的处理,海洋活性污泥也比传统活性污泥有优势,甚至对于含盐量6%的高盐有机废水,处理12 h后能达到CODMn降解率达为70%,氨氮降解率达到30%。当NaCl浓度高于6%,海洋活性污泥仍具有一定的活性,但仍能观察到明显的抑制作用。此外,海洋活性污泥具有比传统活性污泥更强的盐度变化抗性,甚至在低盐度下盐浓度变化时,海洋活性污泥的氨氮降解稳定性也优于传统活性污泥。     

壳聚糖三元接枝共聚物的合成及其阻垢性能

以壳聚糖(CTS)、衣康酸(IA)和马来酸酐(MA)为原料,以醋酸为溶剂、(NH_4)_2S_2O_8为引发剂,合成了CTS-IA-MA三元接枝共聚物。聚合反应的最佳条件为:反应温度90℃,n(CTS):n(IA):n(MA)=1:1.5:1.0,引发剂质量分数0.35%,反应时间5 h。通过傅立叶变换红外光谱(FTIR)表征,所得产物为CTS-IA-MA接枝共聚物。三元接枝共聚物质量浓度为50 mg/L、水样pH为中性或弱酸性时三元接枝共聚物对CaCO_3的阻垢效果较好。     

3种大型海藻对含铅废水的生物吸附研究

运用批吸附技术研究了海带、裙带菜和条斑紫菜对水溶液中Pb2+的吸附特性。结果表明:pH是影响生物吸附的重要因素,海带和裙带菜吸附Pb2+的适宜pH在3~5之间,紫菜吸附Pb2+的最佳pH为4;在20~40℃范围内,3种海藻对Pb2+的生物吸附非常快,40 min达到吸附平衡,动力学数据符合准二级动力学模型;Langmuir和Freundlich模型成功地拟合了平衡数据。热力学分析表明吸附能够自发进行。红外光谱分析表明,羧基是海带和裙带菜吸附Pb2+的主要官能团。实验结果表明,用这3种海藻吸附剂对水溶液中Pb2+具有较好的吸附性能,海带和裙带菜的吸附容量相近,优于紫菜。     

钠基蒙脱土对亚甲基蓝的吸附和解吸研究

采用正交实验方法,确定了钠基蒙脱土吸附亚甲基蓝染料的最佳吸附条件.采用试剂再生法、超声波法、高温焙烧法、氢氧化钠—高温焙烧结合法对钠基蒙脱土吸附亚甲基蓝进行解吸.用扫描电子显微镜照片和红外光谱对吸附前后的钠基蒙脱土的结构进行表征.实验结果表明:在亚甲基蓝溶液pH为10、吸附温度为60℃、亚甲基蓝质量浓度为1 300 m...     

Using supercritical carbon dioxide as solvent to replace water in polyethylene terephthalate (PET) fabric dyeing procedures

Dyeing fabrics in supercritical carbon dioxide (SCD) instead of water can save energy, reduce water use and prevent pollution. The special pilot plant was designed to test dyeing procedures in supercritical carbon dioxide and the analyses of the results indicate major benefits as compared to water based procedures. The dyeing of polyethylene terephthalate (PET) fabric in supercritical carbon dioxide using special pilot plant was investigated. Disperse dye, C.I. (color index) Disperse Blue 79, was used in this study. After dyeing, rinsing in supercritical carbon dioxide, which removes the excess dyes, was also discussed. At the same dyeing conditions, K/S (color yield) of dyed fabric significantly increased with increasing the dye concentration from 1% o.w.f. (on weight of fabric) to 5% o.w.f. Dyeing temperature and pressure had a strong influence on the color yield. When the temperature rose above 110 °C, the increase in color yield was obvious. At 20 MPa, 120–130 °C, dyeing reached equilibrium after 60 min. The excess dye of the dyed PET fabric was small. The suitable condition in supercritical carbon dioxide for removal of excess dye from the dyed fabric was 70 °C, 20 MPa. The PET fabric dyed in supercritical carbon dioxide had good fastness and physical properties.     

Novel eco-friendly spherical porous adsorbent fabricated from Pickering middle internal phase emulsions for removal of Pb(II) and Cd (II)

Spherical porous materials prepared from the emulsion template used in the water treat-ment have displayed a vast prospect,as the high surface area,abundant porous structure,convenient operation and excellent adsorption performance.But the tedious fabrication process,high consumption of organic solvent and surfactant limited the application widely.Herein,a facile and eco-friendly spherical porous adsorbent (SPA) is fabricated from the green surfactant-free (corn oil)-in-water Pickering medium internal phase emulsions (Pick-ering MIPEs) via the convenient ion crosslinking procedure.The Pickering MIPEs synergis-tically stabilized with the semi-coke (SC),which is the natural particle produced from the shale oil distillation,and sodium alginate (SA) has excellent storage and anti-coalescence stability.The as-prepared porous adsorbent possessed the abundant pore structure,which provided favorable conditions for effective mass transfer in adsorption,and could be tuned by varying the SA dosage.The saturation adsorption capacities of Pb(Ⅱ) and Cd(Ⅱ) can be achieved with 460.54 and 278.77 mg/g within 45 min at 25℃,respectively.Overall,this study supplied a viable and eco-friendly route for fabricating the spherical porous adsorbent with a tunable porous structure for heavy metal ion wastewater.     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.     

改性TiO2的制备、表征及光解水制氢性能研究

以陶粒为载体,采用改进的溶胶-凝胶法制备B、Ni共掺杂陶粒负载纳米TiO2光催化剂。利用XRD,TG-DTA,FT-IR等手段对其组成、结构等进行分析和表征。以250 W紫外灯为光源,三乙胺为目标污染物和电子给体,考察了B-Ni2O3-TiO2/陶粒合成体降解污染物耦合光解水制氢的光催化性能;结果表明：所制得的B-Ni2O3-TiO2/陶粒催化剂具有较高的产氢效率,并探讨了焙烧温度、三乙胺溶液初始浓度等对催化剂光催化活性的影响。     

城市表土磁学特征对污染源的指示

分析徐州市城市表层土壤样品的磁学参数(磁化率、频率磁化率、饱和等温剩磁、非磁滞剩磁磁化率、热磁曲线和磁滞回线)变化特征,结果表明,徐州城市表土主要由单畴(SD)和多畴(MD)的亚铁磁性矿物控制,但也存在一定量的赤铁矿。人类活动导致徐州城市表土磁化率显著增加,交通区、居民区、绿地区的平均磁化率分别为:273.06×10~(-8)、111.02×10~(-8)和65.24×10~(-8)m~3/kg。交通运输是市中心交通区和居民区表土磁化率增加的主要来源,工业区附近道路表土中磁性矿物浓度大于远离工业区的交通道路和居民区,绿地区磁性矿物浓度较低。