Evaluation of adsorption capacities of humic acids extracted from Algerian soil on polyaniline for application to remove pollutants such as Cd(Ⅱ), Zn(Ⅱ) and Ni(Ⅱ) and characterization with cavity microelectrode

The adsorption capacities of new humic acids isolated from Yakouren forest (YHA) and Sahara (Tamenrasset: THA) soils (Algeria) and commercial humic acid (PFHA) on polyaniline emeraldine base (PEB) were studied at pH 6.6. Also the adsorption of heavy metals such as Cd2+, Zn2+ and Ni2+ on humic acid-polyaniline systems (HA-PEB) was investigated at the same conditions. HA-PEB compounds were characterized by scanning electron microscopy (SEM), infrared spectrometry and cavity microelectrode. In addition, batch adsorption and cavity microelectrode were used in the adsorption study of Cd2+, Zn2+ and Ni2+ on HA-PEB. To develop biocaptors of polluting metals using a cavity microelectrode modified by HA-PEB systems, the adsorption kinetic and adsorption capacity were investigated. The SEM analysis showed that the presence of humic acid affected the PEB surface and caused the formation of a granular morphology. The maximum adsorption capacities (qmax) of PFHA, THA and YHA determined by adsorption isotherms were 91.31, 132.1 and 151.0 mg/g, respectively. Batch adsorption results showed that qmax of Cd2+, Zn2+ and Ni2+ on HA-PEB followed the order: THA-PEB > YHA-PEB > PFHA-PEB. The voltammograms obtained with HA-PEB modified cavity microelectrode showed the appearance of new redox couples reflecting the adsorption of HA on PEB. Metal-humic acid-polyaniline voltammograms were characterized by appearance of oxidation-reduction couples or reduction wave corresponding to metal. Finally, the result may be exploited to develop a biocaptor based on the cavity microelectrode amended by THA-PEB and YHA-PEB.     

Surface charge and adsorption from water onto quartz sand of humic acid

The surface charge of humic acid under different conditions of ionic strength, pH, and the presence of various cationic ions (Cu(2+), Zn(2+), Ba(2+), and Ca(2+)) was determined by a titration method using a cationic polyelectrolyte as titrant. Adsorption isotherms in batch experiments of the polymer from water onto quartz sand were determined at 20 degrees C, 40 degrees C, and 60 degrees C and under different conditions of ionic strength, pH, and the presence of various cationic ions (Cu(2+), Zn(2+), Ba(2+), and Ca(2+)). The data indicate significant decrease of humic acid surface charge by decreasing the pH value from 10.0 to 4.1. Similar decrease of humic acid surface charge was observed by increasing either the ionic strength or the affinity of the divalent cation toward the humic acid. At ambient temperature the adsorption of humic acid on the quartz sand seems to be controlled mainly by electrical interaction between the organic particle and the solid substrate. A correlation is found between the surface charge and the adsorbed amount of the polymer, the adsorbed amount increases when the surface charge of humic acid decreases. The increase of the adsorbed amount with the temperature suggests that adsorption process is endothermic.     

Comparative study of humic acids of the mound of a wood-feeding termite and of the litter directly below in the Amazon river delta

In order to determine the role of termites in the recycling of organic matter and in humification processes, organic matter from the mound of a wood-feeding termite (Nasutitermes sp.) and from the litter directly below has been studied in secondary forest on the campus of Belem University, in Brazil. The carbon content was slightly lower in the litter (just beneath the mound) than in the mound, but nitrogen was much more abundant in the mound. As a consequence, the C/N ratio of fragmented litter total organic matter is very high, which shows that the humification process is not complete. Therefore, plant debris seemed to be more degraded in the mound than in the litter, indicating a humification gradient from mound to litter. Humic acid extracted from the mound and from the litter was compared by using elemental, E4/E6 ratio, spectroscopic (FTIR) analyses, and Sephadex gel chromatography. First, humic acids were more abundant in the mound than in the litter, showing that humification processes were more advanced in the mound than in the litter. Gel-permeation chromatography showed that the humic acids of the mound contained more low-molecular-weight fractions than those of the litter. In addition, the results of infrared spectra, E4/E6 ratio and elemental composition can confirm the fulvic character of mound material and the humic character of litter material. Therefore, the plant debris seems to follow two different humification pathways in the two environments, as long as the mound is alive.     

Characterization of fulvic acids during olive mill waste composting (Elemental,Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

Characterization of fulvic acids during olive mill waste composting (Elemental, Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

Closely associated theropod trackways from the Jurassic of Zimbabwe

Eighty-eight tracks of large theropod dinosaurs were found in the mid-Jurassic of Zimbabwe. Among the tracks, at least five adjacent trackways are recorded. The adjacent tracks were probably made by animals traveling as a group, given that they are in relatively close succession; that there are three overlapping tracks (among just 23) suggesting reasonably close associations of the animals; that all the tracks are apparently of the same ichnotaxon; that the preservational types of the tracks are similar; and that the tracks are all of animals traveling in one general direction closely associated in time (there are no returning tracks of the same animals or of those of other species; presence of such tracks would be highly probable if the tracks were made over a period of time of even several hours). Nearby, recently discovered giant sauropod tracks, the first in sub-Saharan Africa, indicate a realistic potential of predator/prey interactions between the two groups of dinosaurs.     

Quinoa value chain,adoption, and market assessment in Morocco

Environmental Science and Pollution Research - Agriculture faces many challenges such as climate change, droughts, and salinity, which requires urgent interventions for fast adaptation and...     

Chemically degraded soil rehabilitation process using medicinal and aromatic plants: review

In recent decades, the increasing number of degraded lands worldwide makes their rehabilitation essential and crucial. Various techniques have emerged to fulfill these needs but most of them are expensive and difficult to be applied. Revegetation is a cost effective, environmental friendly, and aesthetically pleasing approach suitable for degraded areas. However, the use of edible crops, especially for areas with heavy metals (HM) contamination, is not ecologically suitable because the HM may enter the food chain. Alternatively, non-edible, fast-growing, deep-rooting, and metal-stabilizing plants with high biomass, which can produce high-value products hold a great potential and have been regarded as potential candidates of edible crops. This current review presents the benefits of using aromatic and medicinal plants (AMPs) and their associated microorganisms for revegetation of degraded sites as they are high-value economic crops. We discussed the effect of various stress on productivity of secondary metabolites in AMPs in addition to the potential health risk with human consumption of these plants and their products. A focus was also given to the effect of HM stress on the essential oil (EO) content of certain AMPs. Reported data showed that AMPs growing on HM-contaminated soils are safe products to use as they are not significantly contaminated themselves by HM.

     

Prenatal diagnosis of SMPD4 loss - A neurodevelopmental disorder with microcephaly,arthrogryposis and structural brain anomalies

SMPD4 loss is a rare neurodevelopmental disorder that leads to severe mental and physical disability and early death in infancy. Most cases of this genetic condition have been diagnosed postnatally. This article focuses on the prenatal findings of affected fetuses. The phenotypes can include growth restriction, arthrogryposis (clenched hands, foot deformity), as well as cerebral abnormalities (simplified gyral pattern/lissencephaly, cerebellar hypoplasia, corpus callosum deformity). SMPD4 loss is detectable via exome sequencing. Here, two fetuses displayed a homozygotic pathogen variant in the SMPD4 gene, encoding for the enzyme Sphingomyelinase-4. Both parents were heterozygous carriers of the pathogenic variant. On detection of the above mentioned signs exome sequencing is indicated, with focus on the SMPD4 gene.