A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources

End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection methods were suggested for equipment types that currently have no specific collection systems in Japan, particularly for video games, notebook computers, and mid-size ICT and audio/video equipment.     

Behavior of dialifor, dimethoate, and methidathion in artificially fortified grape juice processed into wine.

Dialifor and methidathion were added to diluted "Zinfandel" grape concentrate at 25 ppm and dimethoate at 1.0 and 25 ppm prior to fermentation with Saccharomyces cerevisiae. The finished wine 56 days later contained 10% (2.5 ppm) of the dialifor, 46% (12 ppm) of the methidathion and 85% (21 and 0.98 ppm) of the dimethoate added to the grape must. Residues in wine stored at 24 degrees C dissipated by hydrolysis; half-lives in wine were 7 days for dialifor and methidathion and 30 days for dimethoate. Residues were unchanged in wine in frozen storage for one year. Analysis of seven commercial wines for dimethoate indicated less than 0.03 ppm dimethoate was present; identity could not be confirmed by thin-layer chromatography at this level.     

Development of a three-year-old child FE model

OBJECTIVE: Child crash dummies are conventionally used for safety performance evaluations of the child restraint system (CRS) in vehicle crash tests. To investigate injuries to various body regions of a child in detail, mathematical models are useful, and provide information that cannot be analyzed by crash dummies. Therefore, in the present research, a finite element (FE) model of a 3-year-old child has been developed by model-based scaling from the AM50 human FE model, THUMS (Total HUman body for Safety). METHODS: The dimensions of each body region were based on the anthropometry data of United States children, and material properties of child bone were estimated from data reported in the literature. Neck flexion, thorax impact responses, and torso flexion were validated against the response corridor of the 3-year-old Hybrid III dummy in calibration tests. A test of lap belt loading to the abdomen was also conducted. FE models of two different types of CRS, a 5-point harness and a tray shield CRS, were also made, and ECE R44 sled impact test simulations were conducted using the child FE model. RESULTS: The characteristics of the child FE model proved to be close to the Hybrid III and child volunteer corridor. In the ECE R44 sled test simulations using the child FE model, the head movement down and head rotation were large in the 5-point harness CRS, and chest deflection was large in the tray shield CRS. In both CRS types, the whole spine flexed in the child FE model. This behavior is different from that of the Hybrid III, where the thorax spine is stiff and only the cervical spine and lumbar spine flex. CONCLUSIONS: Although this child FE model has several limitations in areas such as the anatomical shapes and material properties of a child, this model can be a useful tool to examine the behavior of a child in impacts, which may be difficult to predict by using the Hybrid III dummy with its stiff thorax spine box.     

PCDDs, PCDFs, and coplanar PCBs in wild terrestrial mammals from Japan: congener specific accumulation and hepatic sequestration

The present study determined the contamination levels and congener-specific accumulation features of dioxins and related compounds (DRCs) in wild terrestrial mammals such as large Japanese field mice (LJFM), lesser Japanese moles (LJMs), and raccoon dogs (RDs) collected from Kanto region in Japan during 2001. The toxic equivalent quantity (TEQ) levels in the carcasses or adipose tissues were in the order of RDs > or = LJMs > LJFM. Comparison of DRC congener profiles in the three species and principal component analysis (PCA) demonstrated a higher contribution of OCDD, T4CB77, and P5CB118 in LJMs. Analysis of liver-adipose distribution of DRC congeners in RDs showed that livers contained significantly higher TEQs than adipose tissues, indicating that liver is a depository organ and critical for determining the toxicokinetics of DRCs. As for most T4, P5, H6CDD/DFs and for P5CB126, H6CB169 and mono-ortho PCB congeners, their liver/adipose concentration ratios in RDs revealed a tendency to increase with hepatic TEQ levels, suggesting TEQ-dependent hepatic sequestration.     

Evolutionary relationships of deep-sea mussels inferred by mitochondrial DNA sequences

In order to elucidate the evolutionary process of deep-sea Bathymodiolus mussels, we investigated the phylogenetic relationships of 16 species worldwide by analyzing nucleotide sequences of the mitochondrial COI and ND4 genes. Deep-sea mussels were clustered into three groups by basal trichotomous divergence. The first was composed of four species found in Japanese waters and one species from the Gulf of Mexico, which contain methanotrophic endosymbiotic bacteria. The second included nine species distributed in the West and East Pacific, Indian, and Atlantic Oceans. Members of the second group were trichotomously divided into the Indo-West Pacific, Atlantic, and East Pacific subclusters. The Indo-West Pacific subcluster was composed of three very closely related species with mutual genetic distances at the intraspecific level (av. 0.019 in COI and 0.009 in ND4 relative to av. 0.156 in COI and 0.265 in ND4 among Bathymodiolus species other than Cluster A species), suggesting some gene flow among these species. The third consisted of two West Pacific species. Species in the second and third groups contain mainly thioautotrophic endosymbionts, including some species harboring both methanotrophs and thioautotrophs.     

Estrus cycle asynchrony in wild female chimpanzees, Pan troglodytes schweinfurthii

Although estrous synchrony has been reported in a number of mammalian species, most often among primates, methodological and analytical problems make it difficult to interpret these results. We developed a novel estrous synchrony index and employed a randomization procedure to analyze long-term observations of female chimpanzee (Pan troglodytes schweinfurthii) estrous cycles at the Mahale Mountains National Park, Tanzania. Our results revealed that female chimpanzees at Mahale avoid synchronizing their estrous periods with each other. We also found that birthrates decreased as the breeding sex ratio increased. We suggest that estrous asynchrony decreases female–female competition for mates. Asynchrony may also reduce the potential for male sexual coercion by nonpreferred mating partners.     

Diving behaviour of Little Penguins from four colonies across their whole distribution range: bathymetry affecting diving effort and fledging success

Little Penguins, Eudyptula minor, breed in several small colonies in New Zealand and Australia. In this study, we compare the birds’ diving performances at different sites situated throughout their breeding range. Environmental conditions and breeding success vary drastically amongst colonies, but all birds feed on similar types of prey and face similar limitations on their foraging range. We examined several diving parameters and calculated the proportion of foraging zone available during breeding to examine whether oceanographic and geographic factors in the foraging zone can explain variations in diving behaviour and fledging success among the different colonies. In colonies with high fledging success, Penguin Island and Oamaru, penguins made shallow dives <50 m depth and had lower diving effort. More than 90% of the foraging zone was in waters <50 m depth in these colonies. Motuara Island also has shallow waters with 95% <50 m depth, but the fledging success was low. Phillip Island has only 42% of waters <50 m and comparatively low fledging success. Thus, penguins dived deeper and showed a higher diving effort in colonies with lower fledging success (Motuara Island and Phillip Island), indicating that they were disadvantaged compared to conspecifics from other colonies that dived shallower and with a lesser diving effort. We concluded that bathymetry is an important factor, but not the only one, which influences fledging success.     

Swim speeds of free-ranging great cormorants

Information about foraging speeds is particularly valuable when the impact of a predator species upon a community of prey has to be defined, as in the case of great cormorants. We measured the swim speed of 12 (six males and six females) free-ranging great cormorants Phalacrocorax carbo, foraging off the Greenland coast during the summer of 2003, using miniaturized data-loggers. Although mean body mass of males was 27% greater than that of females, and mean swim speed of males were 29–57% higher than that of females during foraging phases (but not descent phases) of dives, these differences in speeds were not significant due to high variances. Birds descended to the mean maximum depth of 4.7 m at an average speed of 1.6±0.5 m s⁻¹, a speed similar to that measured in captive cormorants in previous studies. Although bursts of up to 4 m s⁻¹ were recorded, speed usually decreased during the deepest (foraging) phase of dives, being on average 0.8±0.6 m s⁻¹. Speeds measured here should be taken with caution, because the large propeller loggers used to measure speed directly decreased descent speeds by up to 0.5 m s⁻¹ when compared to smaller depth-only loggers. Cormorants in Greenland seem to combine two searching strategies, one requiring low speed to scan the water column or benthos, and one requiring high speed to pursue prey. These two strategies depend on the two main habitats of their prey: pelagic or demersal.     

Fate of parathion in artificially fortified grape juice processed into wine

"Semellon" grape juice fortified with a high level of 25 ppm parathion was fermented using Saccharomyces cerevisiae var. ellipsoideus. After 12 days inte parathion levels in the wine and lees were 10.3 and 156 ppm, respectively; the paraoxon, aminoparathion, and p-nitrophenol levels in the wine were 0.16, 0.20, and 4.5 ppm, respectively, and in the lees were 0.04, 3.1 and 10 ppm, respectively. Thus, hydrolysis of parathion to p-nitrophenol and parathion sorption to sedimented particulate matter were important pathways for parathion residue reduction in the wine. The 56-day-old finished wine just prior to bottling contained 8.8 ppm parathion, 0.04 ppm paraoxon, 0.21 ppm aminoparathion, and 3.0 ppm p-nitrophenol. Two months storage at 24 degrees, 12 degrees, 4 degrees, and -20 degrees C had no effect on paraoxon and aminoparathion residue levels in the wine; parathion residues in wine decreased at all storage temperatures.     

Butyltins in muscle and liver of fish collected from certain Asian and Oceanian countries

Concentrations of butyltin residues were determined in muscle tissue of fish collected from local markets and sea food shops in India, Bangladesh, Thailand, Indonesia, Vietnam, Taiwan, Australia, Papua New Guinea and the Solomon Islands. Contamination levels were determined in the Asia-Pacific region and human exposure was estimated. Similarly, corresponding liver samples of fish muscle collected in Australia, Papua New Guinea and the Solomon Islands were analyzed to obtain information on partitioning of butyltin compounds between muscle and liver tissues. Butyltin compounds were detected in most of the samples which suggested widespread contamination in Asia and Oceania. The concentrations of butyltin compounds were, on average, an order of magnitude higher in liver than in muscle. Residue concentration of Sigmabutyltin in liver was found to be correlated significantly (p < 0.02) with those in muscle. Intensive ship-scrapping activities, sewage disposal and antifouling paints are considered the major sources of butyltins in this region. Increased proportions of MBT over DBT and TBT in samples from most locations indicated degradation of TBT to MBT in fish tissues during storage at 4 degrees C in the dark over 1-2 years. The possibility that fish have been subject to increased exposure to MBT and that TBT degrades to MBT quite rapidly in tropical environments are also considered. Butyltin concentrations in fish from Asia and Oceania were lower than those reported for Japan, Canada and the USA. Although the number of samples analyzed from each country was small, it is tentatively suggested that intake of butyltins by humans via consumption of fish in these countries was < 25% of the tolerable daily intake of 250 ng kg bw(-1) day(-1). To our knowledge, this is the first study reporting on butyltin pollution in developing Asian countries.