Formation of N-nitrosodimethylamine (NDMA) by ozonation of dyes and related compounds

Formation of N-nitrosodimethylamine (NDMA) by ozonation of commercially available dyes and related compounds was investigated. Ozonation was conducted using a semi-batch type reactor, and ozone concentration in gas phase and the ozone gas flow were 10 mg L(-1) and 1.0 L min(-1), respectively. NDMA was formed by 15 min of ozonation of seven out of eight selected target compounds (0.05 mM) at pH 7. All the target compounds with N,N-dimethylamino functions were NDMA precursors in ozonation. The lowest and highest NDMA concentrations after ozonation of the target compounds were 13 ng L(-1) for N,N-dimethylformamide (DMF) and 1600 ng L(-1) for N,N-dimethyl-p-phenylenediamine (DMPD), respectively. NDMA concentrations after 15 min of ozonation of 0.05 mM methylene blue (MB) and DMPD increased with an increase in pH in its range of 6-8. The effects of coexisting compounds on NDMA concentrations after 15 min of ozonation of 0.05 mM MB and DMPD were examined at pH 7. NDMA concentrations after ozonation of MB and DMPD increased by the presence of 0.05 mM (0.7 mg L(-1) as N) nitrite (NO(2)(-)); 5000 ng L(-1) for MB and 4000 ng L(-1) for DMPD. NDMA concentration after MB ozonation decreased by the presence of 5mM tertiary butyl alcohol (TBA), a hydroxyl radical (HO.) scavenger, but that after DMPD ozonation was increased by the presence of TBA. NDMA concentrations after ozonation of MB and DMPD were not affected by the presence of 0.16 mM (5.3 mg L(-1)) hydrogen peroxide (H(2)O(2)). When 0.05 mM MB and DMPD were added to the Yodo and Tone river water samples, NDMA concentrations after 15 min of their ozonation at pH 7 increased compared with those in the case of addition to ultrapure water samples.     

Accumulation of endocrine disrupting chemicals (EDCs) in the polychaete Paraprionospio sp. from the Yodo River mouth,Osaka Bay,Japan

This study presents the levels of endocrine disrupting chemicals (EDCs) accumulated by Paraprionospio sp. from the Yodo River mouth, Osaka Bay. Since high concentrations of nonylphenol (NP), bisphenol A (BP), octylphenol (OP), 17β-estradiol (E2), and estrone (E1) have been measured in sediment from Osaka Bay, some bioaccumulation could be expected particularly in benthic animals. EDCs were analysed in Paraprionospio sp., a dominant benthic species in Osaka Bay. The results showed that Paraprionospio sp. had accumulated varying concentrations (wet weight; w.w.) of NP at 1,460–4,410 ng/g; BP at 22.5–39.6 ng/g; OP at 18.9–45.4 ng/g; E2 at 0.89–4.35 ng/g; and E1 at 0.06–2.50 ng/g. Accumulation of NP and OP were highest among the samples gathered in summer (July 2008), while concentrations of BP, E2, and E1 did not much differs within 3 years. EDC levels in Paraprionospio sp. were apparently greater than those in sediments showing bioaccumulation.     

Background levels of soil beryllium in several countries

Beryllium and aluminium contents in uncontaminated soils from six countries are reported. The means and ranges of beryllium in the surface soils were as follows: 1.43(0.20–5.50)g g^–1 in Thailand (n=28), 0.7 (0.31–1.03) g g^–1 in Indonesia (n=12), 0.99(0.82–1.32) g g^–1 in New Zealand (n=3), 0.58(0.08-1.68)g g^–1 in Brazil (n=16), 3.52(2.49–4.97)g g^–1 in the former Yugoslavia (n=10), and 1.56(1.01–2.73) g g^–1 in the former USSR (n=8). The mean and range of beryllium contents of the surface soils in Japan (1.17(0.27–1.95)g g^–1 n=27) are situated within the values of the soils from these countries except for the Yugoslav soils derived from limestones. The mean of the mean beryllium contents of the surface soils in all these countries is 1.42 g g^–1 which will be used as a tentative average content of beryllium in uncontaminated surface soils, except for the soils derived from parent materials high in beryllium content. The beryllium contents of the subsoils were higher than those of the surface soils in New Zealand and Yugoslavia as is the case with Japan. The correlation coefficient between the contents of beryllium and aluminium in all the soil samples (n=113) including surface soils and subsoils was 0.505 (p < 0.001).     

An assessment of global warming and biodiversity: CGE EMEDA analyses

Environmental Economics and Policy Studies - Genetic resources have been widely used for agricultural animal breeding, drug development, and biomaterials. Coherent assessments of global warming on...     

Occurrence of Viruses and Protozoa in Drinking Water Sources of Japan and Their Relationship to Indicator Microorganisms

A nationwide survey of viruses, protozoa, and indicator microorganisms in drinking water sources of Japan was conducted. Among 64 surface water samples collected from 16 drinking water treatment plants, 51 (80?%) samples were positive for at least one of the 11 pathogen types tested, including noroviruses of genogroups I (positive rate, 13?%) and II (2?%), human sapoviruses (5?%), human adenoviruses of serotypes 40 and 41 (39?%), Cryptosporidium oocysts (41?%), and Giardia cysts (36?%). Total coliforms, Escherichia coli, and F-specific coliphages were detected in 63 (98?%), 33 (52?%), and 17 (27?%) samples, respectively, and E. coli was judged to be the most suitable indicator of pathogen contamination of drinking water sources. Genogroup-specific real-time PCR for F-specific coliphages revealed the presence of F-specific RNA coliphages of animal genogroup I and human genogroups II and III in 13 (41?%), 12 (39?%), and 1 (3?%), respectively, of 31 plaques isolated.     

Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method

This paper mainly focuses on the fabrication process of long fibre reinforced unidirectional thermoplastic composites made using both natural (untreated) treated jute yarns. Jute yarns were wound in layers onto a metallic frame. Polypropylene films were inserted between these layers and compression moulded to fabricate unidirectional jute/PP composite specimens. Static mechanical properties were evaluated from tensile three point bending tests. Pre- post-failure examination were carried out on the test specimens using optical scanning electron microscopy to analyse the test results and investigate the correlations between their impregnation state, processing conditions, mechanical performances and fracture morphologies. For the unidirectional jute/PP film-stacked composites, the results indicated that the processing condition at the moulding temperature of 160°C and moulding pressure of 2.0 MPa for 15 min was ideally suited to obtain optimized properties. Improved wettability of resin melts due to complete matrix fusion at this processing condition facilitated thorough impregnation with minimum microstructural imperfections (microvoids) being generated. Jute/PP composites that contained treated jute yarns have shown superiority in tensile bending properties. Jute yarns polished or coated with PVA/PP (polyvinyl alcohol/polypropylene) must have contributed positively to fibre/matrix interfacial interactions leading to matrix to fibre effective stress transfer, thereby improving their reinforcing effects. Tensile strength and modulus of PP resin increased by approximately 285% and 388%, respectively, due to 50 wt% reinforcement by natural jute yarns. Further improvements in strength and modulus were achieved by approximately 14% and 10%, respectively, when treated yarns were used . The maximum bending stress modulus of jute/PP composites containing untreated yarns were approximately 190% and 460% higher than those of the virgin PP materials, and bending properties were improved by further 11% and 23%, respectively, due to coating treatments on the yarn surface.     

Development of a Safe Solid-State Microorganism/Biodegradable Polymer Composite for Decomposition of Formaldehyde

A very safe and environmentally friendly solid-state material for bioremediation was prepared using a combination of Aspergillus oryzae and poly(ε-caprolactone) (PCL), a porous biodegradable polymer. The novel material was capable of decomposing 200 ppm formaldehyde solutions to 0 ppm within 7 days. Degradation ability was prolonged by addition of yeast extract-peptone-dextrose medium into the composite; 200 ppm formaldehyde was decomposed to 0 ppm over eight additional decomposition cycles and 100 days. A unique mechanism is proposed where, during PCL degradation, the solid-state composite provides nutrients to A. oryzae.     

Population dynamics of Müllerian mimicry under interspecific competition

We ask what the effects of mutualism on population dynamics of two competitive species are. We model the population dynamics of mutualistic interactions with positive density- and frequency-dependences. We specifically assume the dynamics of Müllerian mimicry in butterflies, where the mortality of both species is reduced depending on the relative frequency of the other species. We assume that the two species are under Lotka–Volterra density-dependent competition. The equilibria are compared with the cases of competition alone. Unlike the traditional model of positive density-dependence, population explosion does not appear in the current dynamics, but the new equilibrium is simply achieved. It is because the effects of positive density- or frequency-dependence are restricted to parts of mortality. Both positive density- and frequency-dependences do promote coexistence of the mimetic species. However, the two models show a distinctive difference for coexistence. The effects of positive density-dependence are rather limited. In contrast, positive frequency-dependence always promotes coexistence, irrespective of environmental conditions. The results may imply that the evolutionary origin of Müllerian mimicry may depend on frequency-dependence (and density-dependence), but that its current population dynamics may depend solely on density-dependence. The role of frequency- and density-dependences on evolutionary dynamics is an open question.