Spatio-temporal trends of PCBs in the Swedish freshwater environment 1981–2012

Polychlorinated biphenyls (PCBs) have been monitored in perch (Perca fluviatilis), pike (Esox lucius), and Arctic char (Salvelinus alpinus) in reference lakes since the late 1960s. Temporal trends and spatial patterns are currently monitored in nine and 32 lakes, respectively. Overall, PCB concentrations are decreasing. However, this is not consistent for all congeners across all lakes and species. Perch has comparatively low PCB concentrations relative to suggested target levels, but individual congener concentrations in some lakes are concerningly high. No temporal trend is seen for CB-118 and CB-153 in perch, but significant decreasing trends exist for Arctic char and pike, for which monitoring started earlier than for perch. The lower/higher chlorinated congener ratio decreased over time in most lakes, indicating fewer new emissions. CB-118 and CB-153 concentrations in perch show spatial gradients across Sweden, with higher concentrations found near urban/industrial areas.     

Nuclear power in the 21st century: Challenges and possibilities

The current situation and possible future developments for nuclear power—including fission and fusion processes—is presented. The fission nuclear power continues to be an essential part of the low-carbon electricity generation in the world for decades to come. There are breakthrough possibilities in the development of new generation nuclear reactors where the life-time of the nuclear waste can be reduced to some hundreds of years instead of the present time-scales of hundred thousand of years. Research on the fourth generation reactors is needed for the realisation of this development. For the fast nuclear reactors, a substantial research and development effort is required in many fields—from material sciences to safety demonstration—to attain the envisaged goals. Fusion provides a long-term vision for an efficient energy production. The fusion option for a nuclear reactor for efficient production of electricity has been set out in a focussed European programme including the international project of ITER after which a fusion electricity DEMO reactor is envisaged.     

The echolocation and hunting behavior of Daubenton's bat,Myotis daubentoni

Summary The echolocation and hunting behavior of Daubenton's bat (Myotis daubentoni) were studied in the field under completely natural conditions using a multiflash photographic system synchronized with high-speed tape recordings. The hunting behavior of M. daubentoni is separated into four stages. In the search flight stage Daubenton's bat flies with an average speed of 3.4±0.6 m/s SD usually within 30 cm over water surfaces searching for insects. After the detection of potential prey, the approach flight stage occurs, during which the bat approaches the target in a goal-directed flight. The stage tail down indicates that M. daubentoni is close to the potential prey (approximately 10–22 cm) and is preparing for the catch. The insects are caught with the interfemoral membrane, the feet, and sometimes with the additional aid of a wing. In the stage head down, the bat seizes the prey during flight. Immediately afterwards, Daubenton's bat returns to search flight. M. daubentoni shows the typical echolocation behavior of a vespertilionid bat, emitting frequency-modulated (FM) echolocation signals. The three behavioral stages search, approach, and terminal phase (Griffin et al. 1960) are used to describe the pulse pattern of foraging M. daubentoni in the field. The terminal phase (or buzz) of Daubenton's bat is separated into two parts: buzz I and buzz II. Buzz II is distinguished from buzz I by the following characteristics: a sharp drop in terminal frequency, a distinct reduction in the bandwidth of the first harmonic, a continuous high repetition rate throughout the phase in the range 155–210 Hz, very short pulses (0,25–0.3 ms) and interpulse intervals (4.5–5.0 ms) at the end of the phase, and a distinct decrease in duty cycle. A pause in echolocation separates the end of the terminal phase from the ongoing search phase. The reduction in sound duration after the detection of a target and during pursuits with successfull or attempted catches is discussed in relation to the actual distance of the bat to the target at each stage. It is likely that Daubenton's bat reduces sound duration during approach and terminal phase in order to prevent an overlap of an outgoing pulse with the returning echo from the target. It is argued that the minimum detection distance can be estimated from the sound duration during search flight. Estimates of detection and reaction distances of M. daubentoni based upon synchronized photos and echolocation sequences are given to corroborate this hypothesis. An average detection distance of 128 cm and an average reaction distance of 112 cm were determined. Each behavioral stage of foraging M. daubentoni is characterized by a distinct pattern of echolocation signals and a distinct stage in hunting behavior. The approach flight in hunting behavior coincides with the approach phase and with buzz I in echolocation behavior. The stage tail down corresponds to buzz II. The stage head down is correlated with a pause in echolocation. Immediately afterwards, the bat returns into search flight and into the search phase, emitting search signals.     

Refinery evaluation of optical imaging to locate fugitive emissions

Fugitive emissions account for approximately 50% of total hydrocarbon emissions from process plants. Federal and state regulations aiming at controlling these emissions require refineries and petrochemical plants in the United States to implement a Leak Detection and Repair Program (LDAR). The current regulatory work practice, U.S. Environment Protection Agency Method 21, requires designated components to be monitored individually at regular intervals. The annual costs of these LDAR programs in a typical refinery can exceed US$1,000,000. Previous studies have shown that a majority of controllable fugitive emissions come from a very small fraction of components. The Smart LDAR program aims to find cost-effective methods to monitor and reduce emissions from these large leakers. Optical gas imaging has been identified as one such technology that can help achieve this objective. This paper discusses a refinery evaluation of an instrument based on backscatter absorption gas imaging technology. This portable camera allows an operator to scan components more quickly and image gas leaks in real time. During the evaluation, the instrument was able to identify leaking components that were the source of 97% of the total mass emissions from leaks detected. More than 27,000 components were monitored. This was achieved in far less time than it would have taken using Method 21. In addition, the instrument was able to find leaks from components that are not required to be monitored by the current LDAR regulations. The technology principles and the parameters that affect instrument performance are also discussed in the paper.     

Statistical analysis of heavy metal data from municipal waste incineration residues

Heavy Metal data from a measurement program at a municipal incinerator in Vienna, Austria are analysed. The experimental design had a nested structure, and analysis of variance is used to break down the total variability into several components; (1) variability between mean hourly concentrations, (2) variability between mean sample concentrations within intervals of an hour and (3) variability due to “measurement” errors. Results of a pre-experiment show, that if grab samples are taken, within hour variation is dominant. The results of analysis of variance were used to calculate an optimal number of samples, which ensure a predetermined accuracy for the mean concentrations. In two main measuring periods with different incinerated waste types, slag and fly ash (ESP dust and boiler ash) data are produced and analysed. For both slag and fly ash, significant differences in measures of location and dispersion between the data sets of the main experiment are found. This proves, that differences in the chemical set up of waste can be detected via incineration residues.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Bages-Sigean and Canet-St Nazaire lagoons (France): physico-chemical characteristics and contaminant concentrations (Cu,Cd, PCBs and PBDEs) as environmental quality of water and sediment

Environmental characteristics in water and sediments of two contrasted coastal Mediterranean lagoons, Bages-Sigean and Canet-St Nazaire, were measured over a three season survey. The urban pollution (treatment plant discharges) is very important in Canet-St Nazaire lagoon reflecting untreated sewages, while in Bages-Sigean, the northern part appears more impacted due to larger anthropogenic inputs. Dissolved Cd concentrations are on the whole similar in both lagoons, whereas Cu concentrations are by far higher in lagoon Canet-St Nazaire. Cu concentrations appear to be highly dependent on dissolved organic carbon whereas salinity seems to control Cd variations. Concerning the sediments, the confined northern part of lagoon Bages-Sigean shows organic carbon and total nitrogen enrichment whereas lipid concentrations are much higher in the Canet-St Nazaire lagoon. Cu complexation seems to be strongly related to organic matter as evidenced by the two significant positive relationships, on one hand between Cu and organic carbon, and on the other hand, between Cu and lipids. On the contrary, Cd concentrations appear to be mainly controlled by carbonates. PCBs and PBDEs were detected only in sediments and show relatively low concentrations compared to similar lagoon environments. Regarding the sediment quality guidelines, Cd, Cu and PCBs in both lagoons did not exceed any Probable Effect Concentration (PEC).     

Uptake and metabolism of 2,4,6-trinitrotoluene in higher plants

The fate of the explosive 2,4,6-TNT in plants is of major interest. Therefore, a method was developed to analyse TNT and derivatives in plant tissue. The method was utilized to investigate the uptake and metabolism of TNT inMedicago sativa andAllium schoenoprasum grown in hydroponic cultures containing TNT levels of 0.1 to 10 mg/1. Detectable concentrations of nitrotoluenes were significantly higher inAllium schoenoprasum than inMedicago sativa. The uptake of TNT in plants was directly related to the initial TNT level. The principal nitroaromatic components in roots and shoots of both plant species were identified as 4-ADNT and 2-ADNT in equal amounts, with substantially less TNT.     

Filamentous scum bacteria in activated sludge plants: detection and identification quality by conventional activated sludge microscopy versus fluorescence in situ hybridization.

Detection of filamentous bacteria morphotypes involved in scum formation in activated sludge wastewater treatment plants by conventional sludge microscopy is often doomed to fail because of morphological and taxonomical variations. The aim of this study is to compare detection, identification, and quantification quality of filamentous "scum bacteria" found by conventional activated sludge microscopy and fluorescence in situ hybridization (FISH). In the case of filamentous Microthrix parvicella and Eikelboom morphotypes 1863 and 1851, conventional activated sludge microscopy and FISH results correspond well. In contrast, conventional activated sludge microscopy overlooks nocardioform actinomycete and type 1863 single cells. On the other hand, FISH underestimates filamentous nocardioform actinomycetes and morphotypes 0041/0675 or 0092 because of insufficient cell wall permeability or because of their taxonomic variability, with a resulting inadequacy of previously published probes. Nostocoida limicola morphotype results are still inconclusive because of low bacteria numbers being available in situ and the enormous taxonomic variability within this group.     

Regulation (EC) No. 1107/2009 and upcoming challenges for exposure assessment of plant protection products--Harmonisation or national modelling approaches?

In the new European Pesticide Regulation (EC) No. 1107/2009, the harmonisation of approaches for estimation of the environmental exposure of pesticides is considered a major goal. Several member states currently require their own models for the calculation of predicted environmental concentrations (PEC) in surface water. The variety of methods makes risk evaluations rather time-consuming for both notifiers and evaluating authorities. In the present study we compare surface water concentrations of 19 compounds using EU and country-specific models and risk assessment approaches to evaluate to which extent the resulting estimated exposure concentrations differ. Our results show that EU and country specific approaches and the resulting surface water concentrations differ considerably regarding basic model assumptions and assessment methods. The results indicate that the aimed harmonisation of risk assessment approaches within the EU will be difficult based on current models. New scenarios may help to achieve a harmonisation taking country-specific features into account.