Targeting aquatic microcontaminants for monitoring: exposure categorization and application to the Swiss situation

Background, aim, and scope  

Aquatic microcontaminants (MCs) comprise diverse chemical classes, such as pesticides, biocides, pharmaceuticals, consumer products, and industrial chemicals. For water pollution control and the evaluation of water protection measures, it is crucial to screen for MCs. However, the selection and prioritization of which MCs to screen for is rather difficult and complex. Existing methods usually are strongly limited because of a lack of screening regulations or unavailability of required data.     

Simulating sulfadimidine transport in surface runoff and soil at the microplot and field scale

To prevent residues of veterinary medicinal products (VMPs) from contaminating surface waters and ground water, an environmental impact assessment is required before a new product is allowed on the market. Physically based simulation models are advocated for the calculation of predicted environmental concentrations at higher tiers of the assessment process. However, the validation status of potentially useful models is poor for VMP transport. The objective of this study was to evaluate the dual-permeability model MACRO for simulation of transport of sulfonamide antibiotics in surface runoff and soil. Special focus was on effects of solute application in liquid manure, which may alter the hydraulic properties at the soil surface. To this end we used data from a microplot runoff experiment and a field experiment, both conducted on the same clay loam soil prone to preferential flow. Results showed that the model could accurately simulate concentrations of sulfadimidine and the nonreactive tracer bromide in runoff and in soil from the microplot experiments. The use of posterior parameter distributions from calibrations using the microplot data resulted in poor simulations for the field data of total sulfadimidine losses. The poor results may be due to surface runoff being instantly transferred off the field in the model, whereas in reality re-infiltration may occur. The effects of the manure application were reflected in smaller total and micropore hydraulic conductivities compared with the application in aqueous solution. These effects could easily be accounted for in regulatory modeling.     

Long-range transport and global fractionation of POPs: insights from multimedia modeling studies

The long-range transport of persistent organic pollutants (POPs) is investigated with two multimedia box models of the global system. ChemRange is a purely evaluative, one-dimensional steady-state (level III) model; CliMoChem is a two-dimensional model with different temperatures, land/water ratios and vegetation types in different latitudinal zones. Model results are presented for three case studies: (i) the effect of atmospheric aerosol particles on the long-range transport of POPs, (ii) the effect of oceanic deposition on the long-range transport of different PCB congeners, (iii) the global fractionation of different PCB congeners. The model results for these case studies show: (i) the low atmospheric half-lives estimated for several organochlorine pesticides are likely to be inconsistent with the observed long-range transport of these compounds; (ii) export to the deep sea reduces the potential for long-range transport of highly hydrophobic compounds (but does not remove these chemicals from the biosphere); (iii) there are different meanings of the term global fractionation that refer to different aspects of the fractionation process and need to be distinguished. The case-study results further indicate that the influences of varying environmental conditions on the physicochemical properties and the degradation rate constants of POPs need to be determined.     

Differential responses of vertebrate and invertebrate herbivores to traits of New Zealand subalpine shrubs

Plant traits are influenced by herbivore diet selection, but little is known about how traits are affected by different types of herbivores. We related eight traits of 27 subalpine shrub species in South Island, New Zealand, to damage of these shrubs by introduced red deer (Cervus elaphus) and native invertebrate herbivores using phylogenetically explicit modeling. Deer preferentially consumed species that grew quickly, were low in foliar tannins, or had high leaf area per unit mass. However, these traits did not trade off against each other; rather, they could be related to different multivariate defense strategies. Although the proportion of leaves damaged by leaf-chewing invertebrates also increased with stem growth, invertebrates did not damage the same fast growing species as those preferred by deer. Other traits may also be important in determining herbivore preferences, as suggested by the high proportion of variation in herbivory explained by phylogeny. Last, we found that the composition of invertebrate herbivore communities was more similar among closely related shrubs, and consequently, the range of invertebrate-plant associations may change if introduced deer shift plant composition toward slow-growing species. Overall, our results demonstrate the importance of herbivore type and coevolved interactions for the adaptive significance of plant traits.     

Introducing integrated product and process development into the education of science and engineering undergraduates: a lecture course with an accompanying case-study programme at the ETH chemistry department

Increased quality requirements in the development of chemical products and a growing awareness within society of the activities of chemical companies present a new challenge to the education of young scientists. Nowadays, the teaching of chemists, chemical engineers and environmental scientists at universities has to go beyond the traditional, discipline-orientated knowledge acquisition. The students also have to learn to work and communicate in interdisciplinary teams, to solve application-oriented tasks and to integrate scientific, economical, ecological and social aspects into their work. For this reason, a case-study programme was launched at the chemistry department of the Swiss Federal Institute of Technology. In this paper, we describe the organisational aspects of the programme, its inclusion into academic and industrial environments and summarise some of the scientific methodologies applied. One of the seven case-studies, an assessment of a modern insecticide, is presented in more detail. Finally, we discuss how far the case-study programme is suitable for introducing a new mode of knowledge production to universities.     

The EU-project ERAPharm. Incentives for the further development of guidance documents?

- Triggered by the detection of a large variety of pharmaceuticals in surface waters, soils and groundwaters across the world (e.g. Halling- Sørensen et al. 1998, Daughton & Ternes 1999, Jones et al. 2001, Heberer 2002) and the widespread occurrence of endocrine active compounds and related effects in the environment (e.g. Purdom et al. 1994, Tyler et al. 1998, Vethaak et al. 2002), pharmaceuticals in the environment have become an issue for both the scientific and the public community. During the last few years, our understanding of the fate and effects of pharmaceuticals in the environment has progressed significantly. However, there are still a number of uncertainties concerning the effects of pharmaceuticals on the environment and the assessment of potential exposure (e.g. Hanisch et al. 2004, Salomon 2005). These uncertainties will be addressed by the EU-project ‘Environmental risk assessment of pharmaceuticals’ (ERAPharm). This project, a specific targeted research project, is carried out within the priority ‘Global change and ecosystems’ of the 6th framework programme of the European Union. ERAPharm has started on 1st October 2004; the project duration is three years.     

A tiered procedure for assessing the formation of biotransformation products of pharmaceuticals and biocides during activated sludge treatment

Upon partial degradation of polar organic micropollutants during activated sludge treatment, transformation products (TPs) may be formed that enter the aquatic environment in the treated effluent. However, TPs are rarely considered in prospective environmental risk assessments of wastewater-relevant compound classes such as pharmaceuticals and biocides. Here, we suggest and evaluate a tiered procedure, which includes a fast initial screening step based on high resolution tandem mass spectrometry (HR-MS/MS) and a subsequent confirmatory quantitative analysis, that should facilitate consideration of TPs formed during activated sludge treatment in the exposure assessment of micropollutants. At the first tier, potential biotransformation product structures of seven pharmaceuticals (atenolol, bezafibrate, ketoprofen, metoprolol, ranitidine, valsartan, and venlafaxine) and one biocide (carbendazim) were assembled using computer-based biotransformation pathway prediction and known human metabolites. These target structures were screened for in sludge-seeded batch reactors using HR-MS/MS. The 12 TPs found to form in the batch experiments were then searched for in the effluents of two full-scale, municipal wastewater treatment plants (WWTPs) to confirm the environmental representativeness of this first tier. At the second tier, experiments with the same sludge-seeded batch reactors were carried out to acquire kinetic data for major TPs that were then used as input parameters into a cascaded steady-state completely-stirred tank reactor (CSTR) model for predicting TP effluent concentrations. Predicted effluent concentrations of four parent compounds and their three major TPs were corroborated by comparison to 3-day average influent and secondary effluent mass flows from one municipal WWTP. CSTR model-predicted secondary effluent mass flows agreed within a factor of two with measured mass flows and confidence intervals of predicted and measured mass flows overlapped in all cases. The observed agreement suggests that the combination of batch-determined transformation kinetics with a simple WWTP model may be suitable for estimating aquatic exposure to TPs formed during activated sludge treatment. Overall, we recommend the tiered procedure as a realistic and cost-effective approach to include consideration of TPs of wastewater-relevant compounds into exposure assessment in the context of prospective chemical risk assessment.