Arsenic exposure in Hungary, Romania and Slovakia

Inorganic arsenic is a potent human carcinogen and toxicant which people are exposed to mainly via drinking water and food. The objective of the present study was to assess current exposure to arsenic via drinking water in three European countries. For this purpose, 520 individuals from four Hungarian, two Slovakian and two Romanian countries were investigated by measuring inorganic arsenic and methylated arsenic metabolites in urine by high performance liquid chromatography with hydride generation and inductively coupled plasma mass spectrometry. Arsenic in drinking water was determined by atomic absorption spectrometry. Significantly higher concentrations of arsenic were found in both the water and the urine samples from the Hungarian counties (median: 11 and 15 microg dm(-3), respectively; p < 0.001) than from the Slovakian (median: 0.94 and 4.5 microg dm(-3), respectively) and Romanian (median: 0.70 and 2.1 microg dm(-3), respectively) counties. A significant correlation was seen between arsenic in water and arsenic in urine (R(2)= 0.46). At low water arsenic concentrations, the relative amount of dimethylarsinic acid (DMA) in urine was increased, indicating exposure via food. Also, high body mass index was associated with higher concentrations of arsenic in urine (p= 0.03), mostly in the form of DMA. Smokers had significantly higher urinary arsenic concentrations than non-smokers (p= 0.03). In conclusion, elevated arsenic exposure via drinking water was prevalent in some of the counties. Exposure to arsenic from food, mainly as DMA, and cigarette smoke, mainly as inorganic arsenic, are major determinants of arsenic exposure at very low concentrations of arsenic in drinking water.     

Dynamics, deterministic nature and correlations of outdoor (222)Rn and (220)Rn progeny concentrations measured at Bacău, Romania

The long-term variation, nature and correlations of outdoor ²²²Rn and ²²⁰Rn progeny concentrations measured during the period 1994-2009 were investigated. The time series of data were obtained within the framework of the monitoring program performed by the Environmental Radioactivity Monitoring Station (ERMS) Bac?u, a component part of the National Environmental Radioactivity Survey Network (NERSN), coordinated by National Environmental Protection Agency (NEPA). The measuring method is based on the total beta measurements of atmospheric aerosol filters, using a low background total beta counter and (⁹⁰Sr/Y) reference standard. Analysis of the time series of progeny concentrations in the low atmosphere makes evident different patterns of variation of these concentrations: diurnal, seasonal and annual. A possible relationship of progeny concentration increase with global warming is emphasized. In order to find the dominant frequency of the physical processes determining progeny concentration variability the power spectrum has been used. The deterministic nature of the time series of concentrations has been studied making use of the autocorrelation function and stationarity of the original data and of their phase randomized time series. Also, the correlations with meteorological parameters have been investigated using Pearson’s correlation coefficient with corresponding level of significance.     

Effects of the phenylurea herbicide isoproturon on periphytic diatom communities in freshwater indoor microcosms

The toxic effects of the phenylurea herbicide Isoproturon -IPU: (3-(4-isopropylphenyl)-1, 1-dimethylurea)-were studied on the colonization of periphytic diatom communities, within indoor microcosms consisting of a mixed biotope (water column and natural sediment) and two biological species-rooted macrophyte cuttings (Elodea densa) and benthic bivalve molluscs (Corbicula fluminea). The periphyton, essentially composed of diatoms, was collected on artificial substrata (glass slides) in the upper layers of the water column, after two periods of exposure (34 and 71 days). IPU was initially added in the water or in the sediment compartment, at two nominal concentrations (L1 and L2 levels) for each contamination source-5 and 20 microg litre(-1) and 100 and 400 microg kg(-1) in sediment (w/w) respectively. The effects of IPU on the density and community structure of periphytic diatoms are described. A marked reduction in the diatom density was observed after 34 days exposure to the lower concentration of IPU in the water (5 microg litre(-1)). For the L2 levels, the very small number of live cells present did not permit quantification of the diatom density. After 71 days, recovery in community parameters occurred for the two contamination levels of the sediment and water column sources. Samples collected in the experimental units contaminated with the L2 levels were dominated by heterotrophic and smaller diatom species, such as Sellaphora seminulum. Data treatment based on factorial discriminant analysis enabled us to distinguish the different contamination conditions, with only 11 species from the 130 taxa identified.     

Risk governance guidelines for bioenergy policies

These Notes from the Field summarise the governance guidelines developed by the International Risk Governance Council (IRGC) to address the key challenges that policy-makers face when designing and implementing policies and regulations for the increasing production, trade and use of bioenergy.The guidelines comprise an integrated and coherent set of policy recommendations and practical actions to help policy-makers and industry account for the various trade-offs presented by bioenergy and develop sustainable bioenergy production for domestic use and international trade. They include land-use policies, full life-cycle assessments, as well as sustainability standards and certification criteria.     

Biodegradation and bioconversion of cellulose wastes using bacterial and fungal cells immobilized in radiopolymerized hydrogels

Annually, great amounts of cellulose wastes, which could be measured in many billions of tons, are produced worldwide as residues from agricultural activities and industrial food processing. Consequently, the use of microorganisms in order to remove, reduce or ameliorate these potential polluting materials is a real environmental challenge, which could be solved by a focused research concerning efficient methods applied in biological degradation processes. In this respect, the scope of this chapter is to present the state of the art concerning the biodegradation of redundant cellulose wastes from agriculture and food processing by continuous enzymatic activities of immobilized bacterial and fungal cells as improved biotechnological tools and, also, to report on our recent research concerning cellulose wastes biocomposting to produce natural organic fertilizers and, respectively, cellulose bioconversion into useful products, such as: ‘single-cell protein’ (SCP) or ‘protein-rich feed’ (PRF). In addition, there are shown some new methods to immobilize microorganisms on polymeric hydrogels such as: poly-acrylamide (PAA), collagen-poly-acrylamide (CPAA), elastin-poly-acrylamide (EPAA), gelatin-poly-acrylamide (GPAA), and poly-hydroxy-ethyl-methacrylate (PHEMA), which were achieved by gamma polymerization techniques. Unlike many other biodegradation processes, these methods were performed to preserve the whole viability of fungal and bacterial cells during long term bioprocesses and their efficiency of metabolic activities. The immobilization methods of viable microorganisms were achieved by cellular adherence mechanisms inside hydrogels used as immobilization matrices which control cellular growth by: reticulation size, porosity degree, hydration rate in different colloidal solutions, organic and inorganic compounds, etc. The preparative procedures applied to immobilize bacterial and fungal viable cells in or on radiopolymerized hydrogels and, also, their use in cellulose wastes biodegradation are discussed in detail. In all such performed experiments were used pure cell cultures of the following cellulolytic microorganisms: Bacillus subtilis and Bacillus licheniformis from bacteria, and Pleurotus ostreatus, Pleurotus florida, and Trichoderma viride from fungi. These species of microorganisms were isolated from natural habitats, then purified by microbiological methods, and finally, tested for their cellulolytic potential. The cellulose biodegradation, induced especially by fungal cultures, used as immobilized cells in continuous systems, was investigated by enzymatic assays and the bioconversion into protein-rich biomass was determined by mycelial protein content, during such long time processes. The specific changes in cellular development of immobilized bacterial and fungal cells in PAA hydrogels emphasize the importance of physical structure and chemical properties of such polymeric matrices used for efficient preservation of their metabolic activity, especially to perform in situ environmental applications involving cellulose biodegradation by using immobilized microorganisms as long-term viable biocatalysts.     

An evaluation of occupational accidents in the wooden furniture industry - A regional study in South East Asia

Studies on the rate of occupational accidents among workers in the wooden furniture industry is sparse, although the industry is deemed to be highly accident prone. Therefore, the rate of occupational accidents among workers in the wooden furniture industry in Malaysia, Thailand, Indonesia and Vietnam were studied, in 240 furniture manufacturing factories, using a structured questionnaire. The findings of the study suggest that contract workers are less prone to occupational accidents compared to their permanent counterparts, and hence, are more productive. Further, the results also revealed that the contract workers have a more positive attitude towards the work, and hence, pick up the essentials of safe working practices quickly. It must therefore be recognized that the “production oriented mentality” prevalent in the wooden furniture industry, which has been argued to compromise occupational safety and health standards in the industry may be debatable. In this context, it is essential for the policy makers to re-examine the employment of contract workers for the furniture manufacturing industry, as changing the psycho-economic parameters of the industry may be warranted before the industry is deemed attractive to a permanent workforce.     

High-temperature thermal destruction of poultry derived wastes for energy recovery in Australia

The high-temperature thermal destruction of poultry derived wastes (e.g., manure and bedding) for energy recovery is viable in Australia when considering resource availability and equivalent commercial-scale experience in the UK. In this work, we identified and examined the opportunities and risks associated with common thermal destruction techniques, including: volume of waste, costs, technological risks and environmental impacts. Typical poultry waste streams were characterised based on compositional analysis, thermodynamic equilibrium modelling and non-isothermal thermogravimetric analysis coupled with mass spectrometry (TG–MS). Poultry waste is highly variable but otherwise comparable with other biomass fuels. The major technical and operating challenges are associated with this variability in terms of: moisture content, presence of inorganic species and type of litter. This variability is subject to a range of parameters including: type and age of bird, and geographical and seasonal inconsistencies. There are environmental and health considerations associated with combustion and gasification due to the formation of: NO_X, SO_X, H₂S and HCl gas. Mitigation of these emissions is achievable through correct plant design and operation, however, with significant economic penalty. Based on our analysis and literature data, we present cost estimates for generic poultry-waste-fired power plants with throughputs of 2 and 8 tonnes/h.