A preliminary investigation of the environmental impact of a thermal power plant in relation to PCB contamination

Purpose

The most significant application of polychlorinated biphenyls (PCBs) is in transformers and capacitors. Therefore, power plants are important suspected sources for entry of PCBs into the environment. In this context, the levels and distribution of PCBs in sediment, soil, ash, and sludge samples were investigated around Seyitömer thermal power plant, Kütahya, Turkey. Moreover, identity and contribution of PCB mixtures were predicted using the chemical mass balance (CMB) receptor model.

Methods

United States Environmental Protection Agency methods were applied during sample preparation, extraction (3540C), cleanup (3660B, 3665A, 3630C), and analysis (8082A).

Results

ΣPCB concentrations in the region ranged from not detected to 385 ng/g dry weight, with relatively higher contamination in sediments in comparison to soil, sludge, and ash samples collected from around the power plant. Congener profiles of the sediment and soil samples show penta-, hexa-, and hepta-chlorobiphenyls as the major homolog groups. The results from the CMB model indicate that PCB contamination is largely due to Clophen A60/A40 and Aroclor 1254/1254(late)/1260 release into the sediment and sludge samples around the thermal power plant.

Conclusions

Since there are no other sources of PCBs in the region and the identity of PCB sources estimated by the CMB model mirrors PCB mixtures contained in transformers formerly used in the plant, the environmental contamination observed especially in sediments is attributed to the power plant. Release of PCBs over time, as indicated by the significant concentrations observed even in surface samples, emphasizes the importance of the need for better environmental management.

     

Ecological risk assessment of neem-based pesticides

A tiered process was used to evaluate the risks of pure azadirachtin (AZA) and two neem-based insecticides (Neemix and Bioneem) on six aquatic animals [crayfish (Procambarus clarkii), white shrimp (Penaeus setiferus), grass shrimp (Palaemonetes pugio), blue crabs (Callinectes sapidus), water fleas (Daphnia pulex), and mosquito larvae (Culex quinquefasciatus)] through short term acute toxicity tests. The risk was calculated using the level of concern endpoints (Q values) and relative hazard index (RHI) for acute and chronic exposure scenarios. The Q values of Neemix, Bioneem, and pure AZA derived from acute exposure tests indicated that D. pulex is the only sensitive species to the test pesticides. Furthermore, the RHI values of Neemix and Bioneem for D. pulex were above the critical limit of 10 indicating that these pesticides may pose a moderate hazard to this species and related crustaceans in acute exposure scenarios. The RHI values of the two pesticides and pure AZA were all below the critical limit of 10 for P. clarkii, P. setiferus, P. pugio, C. sapidus, and C. quinquefasciatus. The aquatic risk assessment process showed that the risk values of tested pesticides did not exceed the criteria, and therefore, no ecological hazard is likely to result from their use.     

The effects of endosulfan on the great ramshorn snail Planorbarius corneus (Gastropoda, Pulmonata): a histopathological study

In this study the great ramshorn snail (Planorbarius corneus), one of the most abundant gastropod of Turkish limnic systems, was investigated to determine the histopathological effects of endosulfan on the digestive gland, foot and mantle under laboratory conditions. Samples were collected from small artificial pools in Karaot at Gelendost-Isparta (southwest of Turkey), where agricultural activities are widespread. The snails were exposed to two sublethal concentrations of endosulfan (0.4 and 0.8 mg/l) for periods of 10, 20 and 30 days. Fifteen snails were kept in 2.5 l glass jars containing dechlorinated tap water and exposed under semi-static test (daily exchange of test water). All the testing was carried out on adult specimens, and snails were maintained on a photothermal period with 16 light hours at 22 +/- 2 degrees C. The histopathological examinations revealed the following changes: amoebocytes infiltration, dilatation in hemolymphatic spaces between the tubules, degeneration of cells, abnormal lumen, necrosis of cells and atrophy in the connective tissue of digestive gland; desquamation of the epithelium cells, changes in the number of mucocytes and protein gland cells, lipid vacuolus and atrophy of the columnar muscle fibers of the foot and mantle tissues. Pycnotic state of cells was also seen in the mantle tissues. Endosulfan caused significant histopathological alterations in the digestive gland, foot and mantle tissues of the snail, irrespective of concentrations of the pesticide and its exposure periods. The results are discussed, particularly in comparison to those of other aquatic organisms.     

Development and application of quantitative methods for monitoring dermal and inhalation exposure to propiconazole

Quantitative methods to measure dermal and inhalation exposure to the fungicide propiconazole were developed in the laboratory and applied in the occupational exposure setting for monitoring five farm workers' exposure during pesticide preparation and application to peach crops. Dermal exposure was measured with tape-strips applied to the skin, and the amount of propiconazole was normalized to keratin content in the tape-strip. Inhalation exposure was measured with an OVS tube placed in the worker's breathing-zone during pesticide handling. Samples were analyzed by GC-MS in EI+ mode (limit of detection 6 pg microl(-1)). Dermal exposure ranged from non-detectable to 32.1 +/- 22.6 ng per microg keratin while breathing-zone concentrations varied from 0.2 to 2.2 microg m(-3). A positive correlation was observed between breathing-zone concentrations and ambient air temperature (r2 = 0.87, p < 0.01). Breathing-zone concentrations did not correlate with dermal exposure levels (r2 = 0.11, p = 0.52). Propiconazole levels were below limit of detection when rubber gloves, coveralls, and full-face mask were used. The total-body propiconazole dose, determined for each worker by summing the estimated dermal dose and inhalation dose, ranged from 0.01 to 12 microg per kg body weight per day. Our results show that tape-stripping of the skin and the OVS can be effectively utilized to measure dermal and inhalation exposure to propiconazole, respectively, and that the dermal route of exposure contributed substantially more to the total dose than the inhalation route.     

Spatial distribution and source apportionment of PCBs in sediments around İzmit industrial complexes, Turkey

The spatial distribution, degree of pollution and major sources of PCBs were evaluated in surficial sediments within the heavily urbanized and industrialized ?zmit Bay and its main freshwater inputs. ΣPCB concentrations range from 2.90 to 85.4ngg(-1) in marine sediments and from ND to 47.7ngg(-1) in freshwater sediments. Results suggest that high concentrations of ΣPCBs were localized around a chlor-alkali plant and an industry that handles bulk liquid, dry and drummed chemicals, and petroleum products in the Bay. Using a chemical mass balance receptor model (CMB), major sources of PCBs in the region were investigated. The CMB model identified Aroclor 1254 and 1260 to be the major PCB sources in marine sediments and the less chlorinated Aroclor 1248 and 1242 as the major PCB sources in freshwater sediments. The potential sources for the PCBs were briefly discussed in terms of their use in various industrial applications.     

Solid phase extractive preconcentration of silver from aqueous samples

N,N-dibutyl-N1-benzoylthiourea (DBBT) impregnated onto a polymeric matrix, Amberlite XAD-16 was prepared. The separation and enrichment of Ag(I) from solution was investigated. Effective extraction conditions were optimized in column methods prior to determination by atomic absorption spectrometry. The optimum pH range for quantitative adsorption is 2-5. Quantitative recovery of Ag was achieved by stripping with 1 mol L(-1) thiourea in 1 mol L(-1) HCl. The sorption capacity of resin is 0.115 mmol Ag+ g(-1) resin. The relative standard deviation and detection limit was 3.1% for 1 microg Ag+ mL(-1) solution and 0.11 microg L(-1), respectively. The method was used for the determination of silver in geological water samples.     

Physico-chemical treatment of marble processing wastewater and the recycling of its sludge.

In the first part of this study, the treatability of marble processing wastewater by the coagulation-flocculation process was investigated. Optimum coagulant-flocculant doses for turbidity removal in wastewater from the cutting, faience and equalization processes were determined as 500, 200 and 500 ppm of Al2(SO4)3; 300, 500 and 300 ppm of FeCl3 and 600, 400 and 200 ppm of Agrofloc 100 (AGRON Water Treatment Technologies and Chemical Marketing Industry and Trade Limited Company, Izmir, Turkey), respectively. It was found that the removal of total solids from cutting and equalization process wastewaters was highest for the 100 ppm dosage of all chemicals used. The amount of total solids removed from faience process wastewater by Agrofloc 100 was higher than that removed by the other chemicals used. The removals of suspended solids from cutting, faience and equalization process wastewaters were similar to each other for each of the chemicals. The pH values after treatment by Agrofloc 100 were higher than the values determined after treatment by other chemicals for all process wastewater. Electrical conductivity values, however, were lower for Agrofloc 100 than for the others. Settled sludge volume experiments showed that settled sludge volumes decreased with time. The results of the quiescent settling experiment showed that the settling type could be termed flocculent settling. In the second part of the study, the usage of waste sludge from marble processing as an additive material in cement was investigated. The waste sludge originated from the wastewaters of different steps of the marble processing plant. Waste sludge was replaced with cement at various percentages by weight to prepare the mixtures of mortar. The specimens poured into the moulds were held for 24 h, removed from the moulds and held again for 28 days in lime-saturated water at 23 degrees C. Compressive and flexural strengths were evaluated with respect to percentages of waste sludge replaced with cement. The maximum compressive and flexural strengths were observed for specimens containing a 6% waste sludge when compared with control and it was also found that waste sludge up to 9% could effectively be used as an additive material in cement.     

Evaluation of recycled textile wastes with E-glass fabric in bio-based epoxy matrix composites: investigation of the mechanical properties

Journal of Material Cycles and Waste Management - The goal of this study is to recycle diverse textile wastes and use them as cutting-edge and sustainable raw materials in composite structures. In...     

Food waste management in the retail sector: challenges that hinder transition to circular economy

Journal of Material Cycles and Waste Management - The retail sector is one of the growing sectors all over the world. As the sector grows, the amount of food waste generated increases, and waste...