Microbial succession associated with organic matter decomposition during thermophilic composting of organic waste.

Using dog food as a model of the organic waste, thermophilic composting was carried out for 14 days at a fixed temperature of 60 degrees C. The relationship between organic matter decomposition measured by CO2 evolution during the bio-stabilization process and microbial succession expressed as the changes over time in the restriction fragment length polymorphism (RFLP) patterns of 16S rDNA sequences, of micro-organisms associated with the composting material was also examined. The CO2 evolution rate peaked on day 3 and gradually decreased until it became extremely small after day 9 of composting, indicating that vigorous organic matter decomposition ceased around this time. On the other hand, the RFLP pattern changed drastically from day 0 to day 4 or 5, then remained stable until day 7 or 8, reaching its final configuration, with little variations, after day 9 of composting. RFLP analysis therefore indicates that microbial succession continued into the later stage of composting. Nevertheless, by day 9, the rate of organic matter decomposition was so low that its influence on microbial populations could be hardly recognized by conventional methods of dilution plating. Moreover, the compost produced by day 9 showed no inhibitory effect on the growth of Komatsuna (Brassica campestris L. var. rapiferafroug), indicating that the maturity of compost is sufficient for plant growth when the rate of organic matter decomposition has become extremely low and the RFLP patterns become stable.     

Effects of humic acids derived from lignite and cattle manure on antioxidant enzymatic activities of barley root

To investigate the effects of humic acids (HAs) on the ability of plants to defend themselves against oxidative stress, barley was hydroponically cultured in the absence and presence of HAs, and the antioxidant enzymatic activities (catalase, superoxide dismutase, ascorbate and glutathione peroxidases) of root tissue were evaluated. Auxin-like structures in HAs, which were extracted from an oxidation product of lignite (LHA) and compost derived from cattle manure (CHA), were identified by pyrolysis-gas chromatography/mass spectrometry (GC/MS) with tetramethylammonium hydroxide. The LHA, which had the lower molecular weight, was more effective in promoting the growth of barley root than CHA. However, the amounts of auxin-like structures in the CHA were much higher than those for LHA. The antioxidant enzymatic activities were initially decreased in the presence of LHA and CHA at the first day after refreshing the culture solution, but were significantly increased on the second day. The CHA sample, which contained relatively high levels of phenolic acids that contained auxin-like structures, was effective in increasing four types of enzymatic activities, while the activities of catalase and ascorbate peroxidase were increased in the presence of LHA, which contains naphthalene derivatives. These results indicate that using HAs as a supplement can be effective in enhancing antioxidation enzymatic activities, while the appearance of the effects is retarded because of the decomposition and release of auxin-like compounds from HAs by organic acids from the plant roots.     

Characterisation of PM10, PM2.5 and Benzene Soluble Organic Fraction of Particulate Matter in an Urban Area of Kolkata, India

In this study, the relationship between inhalable particulate (PM₁₀), fine particulate (PM_2.5), coarse particles (PM_{2.5 – 10}) and meteorological parameters such as temperature, relative humidity, solar radiation, wind speed were statistically analyzed and modelled for urban area of Kolkata during winter months of 2003–2004. Ambient air quality was monitored with a sampling frequency of twenty-four hours at three monitoring sites located near traffic intersections and in an industrial area. The monitoring sites were located 3–5 m above ground near highly trafficked and congested areas. The 24 h average PM₁₀ and PM_2.5 samples were collected using Thermo-Andersen high volume samplers and exposed filter papers were extracted and analysed for benzene soluble organic fraction. The ratios between PM_2.5 and PM₁₀ were found to be in the range of 0.6 to 0.92 and the highest ratio was found in the most polluted urban site. Statistical analysis has shown a strong positive correlation between PM₁₀ and PM_2.5 and inverse correlation was observed between particulate matter (PM₁₀ and PM_2.5) and wind speed. Statistical analysis of air quality data shows that PM₁₀ and PM_2.5 are showing poor correlation with temperature, relative humidity and solar radiation. Regression equations for PM₁₀ and PM_2.5 and meteorological parameters were developed. The organic fraction of particulate matter soluble in benzene is an indication of poly aromatic hydrocarbon (PAH) concentration present in particulate matter. The relationship between the benzene soluble organic fraction (BSOF) of inhalable particulate (PM₁₀) and fine particulate (PM_2.5) were analysed for urban area of Kolkata. Significant positive correlation was observed between benzene soluble organic fraction of PM₁₀ (BSM10) and benzene soluble organic fraction of PM_2.5 (BSM2.5). Regression equations for BSM10 and BSM2.5 were developed.     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.     

Biosorption of chromium (VI) from aqueous solutions and ANN modelling

The use of sustainable, green and biodegradable natural wastes for Cr(VI) detoxification from the contaminated wastewater is considered as a challenging issue. The present research is aimed to assess the effectiveness of seven different natural biomaterials, such as jackfruit leaf, mango leaf, onion peel, garlic peel, bamboo leaf, acid treated rubber leaf and coconut shell powder, for Cr(VI) eradication from aqueous solution by biosorption process. Characterizations were conducted using SEM, BET and FTIR spectroscopy. The effects of operating parameters, viz., pH, initial Cr(VI) ion concentration, adsorbent dosages, contact time and temperature on metal removal efficiency, were studied. The biosorption mechanism was described by the pseudo-second-order model and Langmuir isotherm model. The biosorption process was exothermic, spontaneous and chemical (except garlic peel) in nature. The sequence of adsorption capacity was mango leaf > jackfruit leaf > acid treated rubber leaf > onion peel > bamboo leaf > garlic peel > coconut shell with maximum Langmuir adsorption capacity of 35.7 mg g^?1 for mango leaf. The treated effluent can be reused. Desorption study suggested effective reuse of the adsorbents up to three cycles, and safe disposal method of the used adsorbents suggested biodegradability and sustainability of the process by reapplication of the spent adsorbent and ultimately leading towards zero wastages. The performances of the adsorbents were verified with wastewater from electroplating industry. The scale-up study reported for industrial applications. ANN modelling using multilayer perception with gradient descent (GD) and Levenberg-Marquart (LM) algorithm had been successfully used for prediction of Cr(VI) removal efficiency. The study explores the undiscovered potential of the natural waste materials for sustainable existence of small and medium sector industries, especially in the third world countries by protecting the environment by eco-innovation.     

A comparative study of macrobenthic community from harbours along the central west coast of India

Harbours are heavily stressed coastal habitats characterised by high concentration of contaminant and low diversity of benthic community. The west coast of India harbours most of the major harbours compared to the east coast. Very few studies have compared the macrobenthic community between different Indian harbours. The present study was therefore conducted in three important harbour (Ratnagiri, Goa, Karwar) along the central west coast of India. The paper discusses the health status of the three harbours diagnosed using various biotic indices. Sediment samples were collected using van Veen grab (0.11 m(2)) on board CRV Sagar Sukti. A total of 55 macrobenthic taxa were identified and were numerically dominated by polychaete. Biomass was high (0.14-145.7 g m(-2)) and was made largely by echiurans (>80%). Overall, polychaete dominated the macrobenthic diversity. Opportunistic P.pinnata, Notomastus sp. and Mediomastus sp., dominated the macrobenthic community responding to the increased in the harbour. Biotic indices (Polychaete:Amphipod ratio, ABC curve and geometric class abundance) and the dominance of opportunistic species indicate that, the three harbours are under stress from anthropogenic activities.     

Accumulation of endocrine disrupting chemicals (EDCs) in the polychaete Paraprionospio sp. from the Yodo River mouth,Osaka Bay,Japan

This study presents the levels of endocrine disrupting chemicals (EDCs) accumulated by Paraprionospio sp. from the Yodo River mouth, Osaka Bay. Since high concentrations of nonylphenol (NP), bisphenol A (BP), octylphenol (OP), 17β-estradiol (E2), and estrone (E1) have been measured in sediment from Osaka Bay, some bioaccumulation could be expected particularly in benthic animals. EDCs were analysed in Paraprionospio sp., a dominant benthic species in Osaka Bay. The results showed that Paraprionospio sp. had accumulated varying concentrations (wet weight; w.w.) of NP at 1,460–4,410 ng/g; BP at 22.5–39.6 ng/g; OP at 18.9–45.4 ng/g; E2 at 0.89–4.35 ng/g; and E1 at 0.06–2.50 ng/g. Accumulation of NP and OP were highest among the samples gathered in summer (July 2008), while concentrations of BP, E2, and E1 did not much differs within 3 years. EDC levels in Paraprionospio sp. were apparently greater than those in sediments showing bioaccumulation.     

Postural Stability of Sitting Women

The study examined the utility of stabilometric dimensions and explored whether the changes in sitting postures were manifested in functional measures of postural control. Eleven women participated in the study, which used 11 chair sitting postures: arms on laps or arms right angled; armrest at a height of 17, 20 and 23 cm; with or without backrest; slouch or straight back; legs right angled at knees or crossed legs. The backrest and armrest shifted 16.3% of body weight from a seat pan. The characteristics of stabilometric dimensions evaluated the influence of seat components and sitting behaviour on postural balance. The study attempted to evaluate stability and its application in human-seat interface design.     

Mitigation of peroxidative stress for barley exposed to cadmium in the presence of water-extractable organic matter from compost-like materials

The effects of water-extractable organic matter (WEOM) from compost-like materials on peroxidative stress were investigated for hydroponic culture of barley exposed to Cd. In the presence of WEOM, lipoxygenase activity and malondialdehyde, indices of peroxidative stress in barley, were significantly reduced, compared to those with Cd alone (5 μM) for a 30-d culture (p < 0.05). In addition, Cd uptake in the presence of WEOM samples was significantly lower than that in their absence (p < 0.05). These results indicate that the addition of WEOM can be effective in mitigating the peroxidative stress in barley exposed to Cd. Of the total Cd in the solution, 7–8% was complexed with WEOM, indicating that the complexation of Cd with WEOM is a minor factor in reducing Cd-induced stress in barley. The WEOM sample was purified by cation-exchange column and ultrafiltration to remove the nutrient minerals, such as Ca, Mg and Fe. When the purified WEOM was employed for hydroponic culture in the presence of Cd, significant decreases in peroxidative stress and Cd uptake were observed (p < 0.05). These results show that the organic components in WEOM contribute to the mitigation of peroxidative stress in barley exposed to Cd.     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.