Infanticide by a solitary koinobiont ichneumonid ectoparasitoid of spiders

When encountering an already parasitized host, a parasitoid’s optimal choices (superparasitism, host rejection, host feeding or infanticide) seem to depend on the individual species’ life history, because the same choice may have different fitness consequences. We demonstrate infanticide under laboratory conditions by a polysphinctine, Zatypota albicoxa, which is a solitary koinobiont ectoparasitoid of spiders. The female always removed any previously attached egg or larva from the body of the host spider, Parasteatoda tepidariorum, with a rubbing behaviour. She rubbed her ovipositor back and forth toward the undersurface of the attached egg or of the saddle under the attached larva to pry it off and laid an egg after removal. When removing a larva, the infanticidal female engaged exclusively in unfastening the ‘saddle’ which fastens the larva to the body of the spider. All larvae were removed with the ‘saddle’ attached to the ventral surface of the body. The female invested more time to remove the medium second and the large penultimate instar larvae than to remove eggs and first instar larvae because of the labour involved in unfastening the saddle. Oviposition with infanticide of the medium second and the penultimate instar larvae imposed more time upon the female than that on an unparasitized host. Removal of any previous occupant in spite of the associated labour costs suggests that infanticide will always be adaptive, no matter the time costs to Z. albicoxa, because so much is invested in attacking the host and because the parasitoid cannot detect whether the spider is already parasitized until she achieves subjugation.     

Spatial distribution and vertical profile of polybrominated diphenyl ethers and hexabromocyclododecanes in sediment core from Tokyo Bay, Japan

Brominated flame retardants (BFRs), hexabromocyclododecanes (HBCDs) and polybrominated diethyl ethers (PBDEs) were detected in three sediment cores and six surface sediments of Tokyo Bay, Japan. HBCDs were detected for the first time in this region with concentrations ranging from 0.056 to 2.3 ng/g dry wt, implying their widespread contamination, even though their concentrations were lower than summation operatorPBDEs (di- to nona-BDEs) and BDE-209. Levels of these compounds were higher near to the highly populated industrial area of the bay implicating industrial and human activities as sources of these compounds. Summation operatorPBDEs increased in the sediment layer up to the mid-1990s and decreased afterwards, whereas BDE-209 showed an increasing trend until now, following the usage of different commercial BDE mixtures. HBCDs first appeared in the mid-1970s and increased until today. The annual surficial flux of HBCDs (0.62-2.4 ng/cm2/yr) is equal to summation operatorPBDEs (0.95-2.6 ng/cm2/yr) but lower than that of BDE-209 (17-58 ng/cm2/yr).     

Detection of petroleum hydrocarbons at low ppb levels using quartz resonator sensors and instrumentation of a smart environmental monitoring system

Petroleum hydrocarbon vapors at low ppb levels can be detected using a thickness shear mode resonator (TSMR) coated with a chemical-sensing overlayer, prepared by radiofrequency sputtering of porous sintered-polyethylene (PS-PE). The sensing capabilities of PS-PE sensors were profoundly affected by the sputtering methods; they were enhanced by the photo-excitation effect, and were reduced by carbonization and water treatment. The photo-assisted PS-PE sensor was extremely sensitive and could detect linear hydrocarbon (> C12) vapors below the ppb level. The time constant of the sorption curve, however, was large, indicating a slow sensing speed. Toward creating instrumentation for a smart environmental monitoring system, the TSMR sensors were arrayed on a circuit board equipped with a serial interface and signal processing chips of the oscillation drive and frequency counter. Co-sorption with water vapor at a relative humidity of about 10% has almost no effect on the sensing ability of PS-PE sensors for 1,2,4-trimethylbenzene. Conversely, it enhances the sensitivity of the TSMR sensor coated with a D-phenylalanine film. Upward shifts in the baseline are evident with elapsed time. However, a rigorous ten-cycle iteration test for 100 ppm toluene vapor demonstrated good reproducibility of the sensor's signals.     

Formation of submicron sulfate and organic aerosols in the outflow from the urban region of the Pearl River Delta in China

Size-resolved chemical compositions of non-refractory submicron aerosols were measured using a quadrupole Aerodyne aerosol mass spectrometer at a rural site near Guangzhou in the Pearl River Delta (PRD) of China in the summer of 2006. Two cases characterized as the outflows from the PRD urban region with plumes of high SO₂ concentration were investigated. The evolution of sulfate size distributions was observed on a timescale of several hours. Namely mass concentrations of sulfate in the condensation mode (with vacuum aerodynamic diameters (D_va) < 300 nm) increased at a rate of about 0.17–0.37 ppbv h^?1 during the daytime. This finding was consistent with the sulfuric acid production rates of about 0.17–0.3 ppbv h^?1, as calculated from the observed gas-phase concentrations of OH (～3.3 × 10⁶–1.7 × 10⁷ cm^?3) and SO₂ (～3–21.2 ppbv). This implies that the growth of sulfate in the condensation mode was mainly due to gas-phase oxidation of SO₂. The observed rapid increase was caused mainly by the concurrent high concentrations of OH and SO₂ in the air mass. The evolution of the mass size distributions of m/z 44, a tracer for oxygenated organic aerosol (OOA), was very similar to that of sulfate. The mass loadings of m/z 44 were strongly correlated with those of sulfate (r² = 0.99) in the condensation mode, indicating that OOA might also be formed by the gas-phase oxidation of volatile organic compound (VOC) precursors. It is likely that sulfate and OOA were internally mixed throughout the whole size range in the air mass.     

Air pollution by concrete dust from the Great Hanshin Earthquake

Air pollution in the areas affected by the Great Hanshin Earthquake (Hyogo, Japan) of 17 Jan. 1995 was quite serious. We performed three investigations of dust. In the first investigation, we measured the total suspended particulate (TSP) concentration in the greatly damaged areas, located around the Sannomiya Station where a few hundred thousand people walked by during the daytime of 3 February. The maximum concentration at five points reached 150 microg/m3. In the second investigation, eight samples, which were classified into three groups (concrete, mortar, and soil dusts) as sources, were analyzed elementally by X-ray fluorescence. The elements found in concrete dust (Ca and S) were similar to those found in mortar dust. These differed from those found in soil dust (Ti, Fe, and Zr). The elements found in soil dust were important from the viewpoint of heavy metal contamination. In the third investigation, the alkalinity of concrete dust was observed by dissolution. This solution was equivalent to pH 11 to 12 and electrical conductivity 20 to 30 microS/m. We suspect that the alkaline component in the dust from debris in all the devastated areas was approximately comparable with the alkaline solution by which the acid rain falling over the Hanshin district of Osaka Megalopolis in one year could be neutralized into water of pH 7.0.     

A simple method to harness DC (direct current) electrical energy generated by bacterial activity

We developed a new system for collecting electrons generated by bacterial activity to supply DC (direct current) electrical energy. This system used eight titanium sub-electrodes (surface area of each sub-electrode: 189 cm²) connected to one central main titanium electrode (surface area of electrode: 1571 cm²). The distance between each sub-electrode and the main electrode was 30 cm. In an initial experiment, we collected electrons during composting cattle excreta, which was mixed with a commercially available microbial compost activator/starter. We analysed the relationships between the composting temperature and electrical current and voltage. Electrons were effectively collected and used successfully to obtain DC electrical energy. Generation of a stable voltage of approximately 0.5 V was clearly observed. This voltage was not related to compost temperature; however, the generated electrical current increased and decreased with compost temperature. The method was then used in a second experiment to collect electrons generated by bacterial activity in an agricultural field (area: 48 m²). Electrons in the field were effectively collected, and we measured a stable voltage of approximately 1.1 V and a stable current of approximately 0.7 mA. The system has the advantages of being simple, easily maintained, inexpensive, and applicable to large-scale agricultural fields.     

Epidemiology of tornado destruction in rural northern Bangladesh: risk factors for death and injury

The epidemiology of tornado-related disasters in the developing world is poorly understood. An August 2005 post-tornado cohort study in rural Bangladesh identified elevated levels of death and injury among the elderly (≥ 60 years of age) (adjusted odds ratio (AOR) = 8.9 (95 per cent confidence interval (CI): 3.9-20.2) and AOR = 1.6 (95 per cent CI: 1.4-1.8), respectively), as compared to 15-24 year-olds, and among those outdoors versus indoors during the tornado (AOR = 10.4 (95 per cent CI: 5.5-19.9) and AOR = 6.6 (95 per cent CI: 5.8-7.5), respectively). Females were 1.24 times (95 per cent CI: 1.15-1.33) more likely to be injured than males. Elevated risk of injury was significantly associated with structural damage to the house and tin construction materials. Seeking treatment was protective against death among the injured, odds ratio = 0.08 (95 per cent CI: 0.03-0.21). Further research is needed to develop injury prevention strategies and to address disparities in risk between age groups and between men and women.     

Disposition of bisphenol A in pregnant mice and fetuses after a single and repeated oral administration

The risk assessment of bisphenol A (BPA) on the development of offspring of humans is an important issue. There have been some reports on the fate of BPA in rodents, but information on the BPA level in fetal organs essential for the extrapolation to humans is inadequate. In the present study, we investigated the distribution pattern of ¹⁴C-BPA-derived radioactivity in fetal tissues following administration of 10?mg/kg ¹⁴C-BPA to the pregnant mice. The radioactivity was rapidly transferred through placenta and distributed to all fetal organs including reproductive organs and brains in a similar level. The concentration declined slowly compared with dams. Analysis of metabolites in fetuses showed that a fraction of BPA was unexpectedly large compared to the maternal blood. There was no clear effect of the fetal position in a uterus to influence the radioactivity concentration in whole fetuses. The dose dependence of pharmacokinetics should be recognized to extrapolate the pharmacokinetic result from animal experiments at high doses to humans at low doses. Similar experiments were conducted with an addition of two doses, 1 and 100?mg/kg, respectively. The pharmacokinetics seemed to be linear between 1 and 10?mg/kg, although at 100?mg/kg BPA was absorbed slowly and the radioactivity concentrations in fetuses were much higher than expected based on the linear dose dependence. Repeated doses were administered to pregnant mice since humans are exposed to BPA chronically. Radioactivity level in most of the fetal tissues on repeated administration was higher than single administration.     

Consideration on safety for emerging technology – Case studies of seven service robots

Despite the fact that several manufacturers of service robots launched their innovations into the market, worldwide guidelines or regulations concerning the safety aspects of service robots are not yet available. However the general principles and methodologies of safety of machinery (e.g., ISO/IEC Guide 51, partly ISO14121, ISO12100) could be implemented to a certain degree. The safety of seven service robots as an emerging technology was verified by safety professionals of “NPO – the Safety Engineering Laboratory” a Non Profit Organization. NPO verified the “Critical Hazards” for each service robot mentioned by the respective manufacturers. For those cases, both the “As Low As Reasonably Practicable” principle and the “Reasonable Alternative Design” standard were applied for judging if the risk associated with the Critical Hazards were tolerable or not and if state of the art measures for reducing the risk were applied adequately. These experiences will help to establish guidelines for the safety of service robots as an emerging technology in the future.