The distribution of molybdenum in the tissues of wild ducks

The Mo contents and the relations between Mo and Cu or Crcontents were investigated in the organs of Japanese wild ducks(spotbill duck, pintail, wigeon, scaup and tufted duck). Thehighest Mo content in kidney and liver of the dabbling duckswere more than 30 g g^-1 dry weight (g g^-1 d.wt.), though that of diving ducks were less than 11 gg^-1 d. wt. The contents were lower in the ducks migratingwithin Japan, Eurasia and North America than those in the birdsmigrating between Japan and Eurasia. The contents of liver inall species were more than 50 and less than 5 g g^-1 d.wt. for Cu and Cr, respectively. Significant correlations werefound between Mo and both elements in pintail and scaup, and Moand Cr in tufted duck. These results suggest that thecontamination of wild ducks reflects the reproductive area, andnot the collected area. Mo contents closely correlated with theCu and/or Cr contaminations.     

Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar

The rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar was carried out in a hydrogen atmosphere at 1073 K and 973 K. The assumed oligomers were partially pyrolyzed epoxy resin with biomass tar as solvent for the resin. The product distributions obtained from rapid hydropyrolysis of phenol and bisphenol-A are shown. We also discuss the effects of reaction temperature and hydrogen partial pressure on the product yield. In particular, more phenol was produced from bisphenol-A at 973 K than at 1073 K. The yield of methane, which was the final hydropyrolysis product, increased with increasing hydrogen partial pressure, whereas benzene and phenol were believed to behave as intermediate products in the hydropyrolysis reaction. The results suggest that phenol could be obtained with high selectivity from tar by optimizing the reaction conditions.     

Estimation of 14CO2 flux at soil-atmosphere interface and distribution of 14C in forest ecosystem

To realize the dynamical behavior of 14C among exchangeable carbon reservoirs in terrestrial environment, a method for in situ determination of 14CO2 flux at soil-atmosphere interface and a high flow rate CO2 sampler were developed. This method allowed us to collect integrated quantity of CO2 for determining 14C activity over an extended time period under environmental conditions with minimal site disturbance. The 14CO2 flux from ground surface was estimated to be 1.59 x 10(-5) Bq m (-2) S (-1) in a forest floor with the method. The specific activities of 14C in environmental materials such as some biological and air samples were also determined in the vicinity of the place, where the flux measurement was made, to discuss the behavior of 14C in the forest ecosystem. The results indicated that fresh pine needles had a similar 14C specific activity to the atmospheric CO2 at the same height due to its fairly rapid equilibrium, 14C specific activity in the atmospheric CO2 has a concentration gradient near the ground surface and, at least in this site, CO2 with high 14C specific activity was generated by decomposition of soil organic matter which may be accumulated in soil as a result of former nuclear weapons tests.     

Dynamics of the nitrogen cycle in a lake and its stability

Recent eutrophication of lakes or sea water has caused serious damage to the ecological balance in aquatic systems and to the quality of water for human use. The purpose of this study is to construct a dynamic model of the nitrogen cycle in a lake and to study the dynamic behavior of the various nitrogen forms such as organic, inorganic and plankton in connection with the mechanism of algal blooms in lakes. The dynamics of the system are represented by a system of non-linear differential equations which include the predator-prey relation between plankton types, and are discussed with the stability analysis of the critical points of differential equations. The effects of seasonal changes of environmental parameters are studied with computer simulations.     

Characterization of atmospheric dry deposition particulates in Kobe, Japan

The sources and character of individual metal and metalloid particles from atmospheric dry depositions in Kobe, Japan were investigated. Japan faces long-range pollutant transportation from northeastern Asia during winter and spring. Information regarding their properties and sources is useful for evaluating their affects on the environment and human health. Individual metal and metalloid particles that were collected for every 24 h on the plate, which was designed to reduce a local turbulence, were characterized for their composition, diameter, and deposition fluxes using a field emission scanning electron microscope with an energy dispersive X-ray spectrometer. Approximately 3,000 metal and metalloid particles were classified into 14 types based on their composition and further classified into four groups based on their distribution patterns. They are (A) Fe-O, Fe-Ba-Sb-Cu-S-Ti-O, Fe-Zn-O, Zn-O, Ni-O, and Mn-Fe-O; (B) Cu-Zn-O and Cu-Sn-O; (C) Pb-O, Sn-Sb-O, and Ag-O; (D) Pb-Zn-Cl-Si-S-O and Bi-Cl-O. From these data, this study suggests their sources as the Asian continent (Group A), local source (Group B), multiple sources (Group C), and incineration process (Group D). This study shows (1) the sources and character of individual metal and metalloid particles from short-term atmospheric depositions in Kobe, Japan and (2) application of individual particle analysis for atmospheric depositions.     

Airborne hydrophilic microplastics in cloud water at high altitudes and their role in cloud formation

Microplastic pollution is occurring in most ecosystem, yet their presence in high altitude clouds and their influence on cloud formation and climate change are poorly known. Here we analyzed microplastics in cloud water sampled at the summits of Japan mountains at 1300–3776 m altitude by attenuated total reflection imaging and micro-Fourier transform infrared spectroscopy. We observed nine microplastics including polyethylene, polypropylene, polyethylene terephthalate, polymethyl methacrylate, polyamide 6, polycarbonate, ethylene–propylene copolymer or polyethylene–polypropylene alloy, polyurethane, and epoxy resin. Microplastic were fragmented, with mean concentrations ranging from 6.7 to 13.9 pieces per liter, and with Feret diameters ranging from 7.1 to 94.6 μm. Microplastics bearing hydrophilic groups such as carbonyl and/or hydroxyl groups were abundant, suggesting that they might have acted as condensation nuclei of cloud ice and water. Overall, our finding suggest that high-altitude microplastics cloud influence cloud formation and, in turn, might modify the climate.

     

Generation of cyanide ion by the reaction of phenol with nitrous acid in wastewater

It was found that phenol reacts with nitrous acid to produce cyanide ions. Cyanide ion generation is attributed to the conversion of phenol to nitrosophenol through the well-known nitrosation reaction, and decomposition of benzoquinonoxim to form cyanide and aliphatic compound.     

Use of lees materials as an adsorbent for removal of organochlorine compounds or benzene from wastewater

Lees materials such as wheat bran, rapeseed, linseed, okara (lees of bean curd), and sakekasu (sake lees) were found to effectively adsorb organochlorine compounds. The amounts of these compounds such as chloroform, dichloromethane, and benzene adsorbed were plotted against the equilibrium concentration of substances in solution on a logarithmic scale. A linear relationship was obtained, indicating that the adsorption reactions were of the Freundlich type. When the lees materials were applied to wastewater (pH: 10) containing 0.1 g/l of dichloromethane, dichloromethane was removed from the wastewater in the range of 70-90% efficiency after 90 min. There was a high correlation between the removal efficiency and the number of spherosomes, which are intracellular particles attributed to the uptake of organochlorine compounds.     

Estimation of effects of dioxins and dioxin-like PCBs on wildlife population--a case study on common cormorant

We presented a method for quantitatively evaluating the effects of chemical pollutants in the environment on a wildlife population. We expressed the effects of exposure to dioxins and dioxin-like PCBs in Tokyo Bay sediment on a common cormorant (Phalacrocorax carbo) population in two ways. One was the changes in the intrinsic growth rate, and the other was the changes in the gross population size. The effects of exposure to the compounds were estimated by using the method of population ecology and available field data. Common cormorant population at Shinobazu Pond in Tokyo, Japan during 1974-1986 was selected as the target population. Intrinsic growth rate or gross size of the population based on the calculated residual level of dioxins and dioxin-like PCBs in the period was estimated to decrease to 89% or 85% of that without exposure to the compounds, respectively.