Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

Impact of green trust and green perceived quality on green purchase intentions: a moderation study

Environment, Development and Sustainability - The current study explores the role of green trust, green perceived risk and green perceived quality in changing green purchase intention....     

Challenges to promoting eco-industry parks in Malaysia: A case study of Rawang Integrated Industrial Park

Journal of Material Cycles and Waste Management - Malaysia is a developing country, and its economic growth has caused the increase in the generation of industrial waste in terms of its volume. The...     

Effect of calcium against salinity-induced inhibition in growth, ion accumulation and proline contents in Cichorium intybus L

This study assesses the effect of NaCl (80 and 160 mM) and CaCl2 (10 mM) solutions, alone and in combination, to 30-day-old seedlings of Cichorium intybus L. Observations were made at 30 day intervals from the time of treatment till harvest (180 days after sowing). Application of NaCI resulted in significant decreases in lengths of root and stem, in dry weights of root, stem and leaves and in the leaf area, as compared with control. The reduction was less with the combined application of NaCI and CaCI2 than with the NaCI treatment alone. On the contrary treatment of CaCl2, alone promoted the above variables. Proline content in the leaves was enhanced with NaCl and CaCI, alone as well as with the NaCI + CaCI2 treatments; the maximum (six-fold) enhancement was observed with the combined treatments, compared with NaCl (four-fold increase) and CaCl2 (two-fold increase) alone. The sodium (Na+) and Chloride (CI) contents in different plant parts increased both with NaCI and with NaCI+ CaCI2 treatments. The maximum accumulation was observed in leaves, followed by that in stem and root. The potassium (K+) and calcium (Ca2+) contents decreased under NaCl stress, but increased with CaCI2 treatment. Thus, calcium ameliorated the deleterious effects of NaCI stress and stimulated the plant metabolism and growth.     

Screening and detection of biomarkers in chickpea plants exposed to chromium and cadmium

A broad screening protocol, covering the most general phytochemical groups of compounds, was developed on the basis of high performance thin layer chromatography (HPTLC). A total of six TLC systems, comprising three derivatization reagents, two stationary phases and two mobile phases, were included. The screening method was applied for the identification of biomarkers in the chickpea plant exposed to cadmium and chromium. The biomarkers were selected on the basis of significant changes (0.26-4.6 fold) in concentration levels of phytochemicals. Totally, five different amino acids, three organic acids, one sulphur containing compound and one sugar were identified as biomarkers in chickpea exposed heavy metal.     

Carbofuran-induced effects on acetylcholinesterase (AChE) in erythrocytes and liver of Cyprinus carpio

A study was conducted to determine the effects of long-term exposure to carbofuran on erythrocyte and liver acetylcholinesterase (AChE) activity in Cyprinus carpio, and assess which tissue was more sensitive to pesticide exposure examining this enzyme. Fish were allowed to accilimatize in toxicant-free water for 24 days after 60-day exposure. AChE activity was determined with a spectrophotometer using acetylthiocholine iodide as a substrate in erythrocytes and liver. Enzymic activity of erythrocytes and liver decreased over time. A higher degree of enzyme inhibition was observed in erythrocyte compared to liver. The degree of enzyme inhibition was positively correlated with exposure time. When exposed fish were transferred to clean water, recovery was greater in erythrocytes than liver. Erythrocyte AChE activity recovered after 18 days, while it required 21 days in liver. The findings of this study indicate that erythrocyte AChE is more sensitive to carbofuran than liver. The greater sensitivity of erythrocyte AChE suggests that it may be more useful as a biomarker for monitoring status of pollution in freshwater bodies.     

Use of different soft tissues of Perna viridis a s biomonitors of bioavailability and contamination by heavy metals (Cd,Cu, Fe,Pb, Ni,and Zn) in a semi-enclosed intertidal water,the Johore Straits

Green-lipped mussels, Perna viridis, were collected from the eastern and western parts of the Johore Straits in September 2004 and January 2005. Based on the heavy metal concentrations in the different soft tissues (gonad, foot, mantle, gills, muscle, and remaining soft tissues) of these mussel samples, the eastern part of the Johore Straits (which is divided into two portions by a causeway), recorded higher levels of bioavailability and contamination by Cd, Cu, Fe, Ni, and Zn when compared to the western part, while Kg. Pasir Puteh in the eastern part was found to record the highest bioavailability and contamination by heavy metals. The use of different soft tissues of P. viridis as biomonitors of bioavailability and contamination by Cd, Cu, Fe, Pb, Ni, and Zn in the semi-enclosed Johore Straits is proposed, since erroneous results due to spawning and the problem of defecation before dissection could be overcome. Hence, a more accurate interpretation of the bioavailability and contamination by heavy metals in coastal waters could be obtained. To our knowledge, this is the most detailed study on the bioavailability and contamination of heavy metals in the Johore Straits on the Malaysian side of the waterway carried out by using the different soft tissues and metal distribution based on the Mussel Watch approach.     

Biopolymer-based membranes from polysaccharides for CO2 separation: a review

Environmental Chemistry Letters - The application of natural biopolymers such as polysaccharides for the fabrication of bio-based membranes has recently attracted attention for CO2...     

Study of heavy metals in some environmental samples

Fuels like coal and rubber are frequently used for brick burning. However, both coal and rubber contain heavy metals. These heavy metals may elutriate in the wake of fly ash or may adsorb or absorb in the product. The present work deals with the analysis of heavy metals in some samples collected from brick burning industries located in the vicinity of a metropolitan city, Peshawar, Pakistan. Samples from raw clay, product, chimney scale and fossil fuel & rubber were collected and leached with acid mixture. The leachates were concentrated and analyzed by atomic absorption spectrophotometer for the determination of chromium (Cr), lead (Pb), cadmium (Cd) and antimony (Sb). It was observed that heavy metals are present in clay, brick and chimney scale. However, significant amount of these metals was observed in chimney scale. It is inferred that such emanations laden with heavy metals are accompanying the stack gases which are being dumped in to the environment. In order to avoid environmental problems, strict environmental regulations shall be enforced and a constant check on these emanations to the environment must be made to ensure clean air act.     

Anthropogenic impacts on heavy metal concentrations in the coastal sediments of Dumai, Indonesia

Concentrations of Cd, Cu, Pb, Zn, Ni and Fe were determined in the surface sediments to investigate the distributions, concentrations and the pollution status of heavy metals in Dumai coastal waters. Sediment samples from 23 stations, representing 5 different site groups of eastern, central and western Dumai and southern and northern Rupat Island, were collected in May 2005. The results showed that heavy metal concentrations (in microg/g dry weight; Fe in %) were 0.88 (0.46-1.89); 6.08 (1.61-13.84); 32.34 (14.63-84.90); 53.89 (31.49-87.11); 11.48 (7.26-19.97) and 3.01 (2.10-3.92) for Cd, Cu, Pb, Zn, Ni and Fe, respectively. Generally, metal concentrations in the coastal sediments near Dumai city center (eastern and central Dumai) which have more anthropogenic activities were higher than those at other stations. Average concentration of Cd in the eastern Dumai was slightly higher than effective range low (ERL) but still below effective range medium (ERM) value established by Long et al. (Environmental Management 19(1):81-97, 1995; Environmental Toxicology Chemistry 17(4):714-727, 1997). All other metals were still below ERL and ERM. Calculated enrichment factor (EF), especially for Cd and Pb, and the Pollution load index (PLI) value in the eastern Dumai were also higher than other sites. Cd showed higher EF when compared to other metals. Geo-accumulation indices (I(geo)) in most of the stations (all site groups) were categorized as class 1 (unpolluted to moderately polluted environment) and only Cd in Cargo Port was in class 2 (moderately polluted). Heavy metal concentrations found in the present study were comparable to other regions of the world and based on the calculated indices it can be classified as unpolluted to moderately polluted coastal environment.