Effects of treated sewage sludge levels on temporal variations of some soil properties of a Typic Xerofluvent soil in Menemen Plain, Western Anatolia, Turkey

The aim of this study is to determine effects of treated sewage sludge (TSS) levels as an organic matter (OM) resource on temporal variations of some soil properties of a Typic Xerofluvent soil. The experiment was conducted in Menemen Plain, in the Western Anatolia Region of Turkey (latitudes 38 degrees 34'48.22'-38 degrees 34'49.24' N; longitudes 27 degrees 1'23.05-27 degrees 1'24.14' E) in the years of 2003 and 2004. Moist TSS was added to the soil at the rates of 0, 30, 60 and 90 t ha(-1) on May 1, 2003. Peanut (Arachis hypogaea) was planted as first crop. On the other hand, mixture of green barley (Hordeum vulgare) and common vetch (Vicia sativa L.) was planted as second crop. During the experiment, soil samples were taken in five different periods (1st, June 18, 2003; 2nd, November 13, 2003; 3rd, April 30, 2004; 4th, October 10, 2004 and 5th, May 12, 2004). The results showed that increasing TSS application to Typic Xerofluvent soil was significantly increased total salt, OM, total porosity, micro porosity, macro porosity, field capacity, wilting point, available water content, structure stability index and aggregation percentage values of soil when compared with control. Meanwhile, particle density, dry bulk density and nonaggregated silt + clay values of soil decreased. On the other hand, soil reaction (pH), lime content and total silt + clay values of soil did not significantly change. In the course of time, depending on decomposing of TSS organic materials in soil, effect of TSS levels on soil properties decreased particularly in the last periods. For this reason, it can be recommended that 90 t ha(-1) moist TSS can be added once in 2 years for improving soil properties of Typic Xerofluvent soil, which are characterized by low OM content.     

Non-target effect of organic insecticides: effect of two plant extracts on soil microbial biomass and enzymatic activities in soil

Efficacious botanical derivatives can provide an alternative to synthetic pesticides for organic farming systems. However, there is lack of information regarding the side effects of organic pesticides on key soil ecological processes. In this study, we investigated the effects of aqueous extracts from Urginea maritima and Euphorbia myrsinites exhibiting translaminar and systemic activity against pests on microbial biomass and enzymatic activities in soil. Two grams of plant material was extracted with 100 ml of water and then diluted 1:100, 2:100, and 4:100 with distilled water. Diluted plant extracts were applied around hypocotyl of tomato by soil drench. The effect of both plant extracts on microbial biomass C, amount of total N and organic C, and enzymatic activity in soil was significant. After the last application, the highest microbial biomass C was determined in the lowest U. maritima concentration (U 1:100). Soils treated with the highest concentration of U. maritima (U 4:100) had always lower SMBC content than control soil. All concentrations of E. myrsinites decreased microbial biomass C by 18% to 27% compared to the control. Total nitrogen and organic carbon decreased in soils without (control) and with treated U. maritima extract from first application to last application. Phosphatase, urease, and β-glucosidase activities were monitored in plant extract-treated soils. Except U. maritima 1:100 treatments of second and fourth applications, the other treatments of plant extracts negatively affected enzymatic activity in soil. U. maritima and E. myrsinites plant extracts exhibited different effects on soil microbial biomass and activity, probably because of their different chemical contents.     

The Removal of Acid Violet 90 from Aqueous Solutions Using PANI and PANI/Clinoptilolite Composites: Isotherm and Kinetics

Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV 90). The samples were characterized by X-ray diffractions, nitrogen adsorption–desorption isotherms, scanning electron microscopes and Fourier transform infrared. The effect of initial pH (2–8), sorbent dosage (0.5–4.0 g/L) and initial dye concentrations (50–400 mg/L) on adsorption onto PANI and PANI/GC were examined in a batch system. Langmuir, Freundlich and Temkin isotherm models were used to investigate the adsorption mechanism of AV 90 on PANI and PANI/GC. Langmuir isotherm model for PANI/GC and Freundlich isotherm model for PANI were fitted well with the experimental data. The highest dye uptake capacities were obtained with Langmuir isotherm model as 153.85 mg/g and 72.46 mg/g for PANI and PANI/GC, respectively. In order to determine the adsorption kinetics, pseudo first-order and second-order kinetic models were studied. As a result, the adsorption of AV 90 dye on PANI and PANI/GC was better identified with Pseudo second-order kinetic model than the first one.     

Recycling bottom ash in production of eco-friendly interlocking concrete paving blocks

Journal of Material Cycles and Waste Management - Coal combustion waste reaches huge amount that causes environmental problem. In modern world, wastes generated from an industry can be used by...     

Dynamic simulation and performance prediction of free displacer Stirling engines

ABSTRACT

In this study, a Stirling engine with a free-displacer and a kinematically controlled power piston was proposed and analyzed from thermodynamic and dynamic points of view. The analysis intended to reveal the dynamic behaviors of moving components of the engine as well as predicting global thermal performance of it. A dynamic-thermodynamic mathematical model of the engine involving the isothermal gas pressure equation and motion equations of the displacer, power piston and crankshaft was developed. For the solution of the dynamic-thermodynamic model equations, and simulation of the engine’s running, a computer program was prepared in FORTRAN language. By considering a hot-end temperature of 1,000 K and a cold-end temperature of 350 K, dimensions of mechanic, volumetric and thermal components of the engine were quantified interactively. Variations of engine speed, engine power, displacer stroke, and engine torque were examined with respect to the spring constant, displacer mass, displacer damping constant and external load and, results were graphically presented. In comparison with engines having free-piston and kinematically driven displacer, the thermodynamic performance of the free-displacer engine was found to be lower. The engine was found to be able to work at constant speed and power. The values of the displacer mass and spring constant were optimized as 1,500 g and 1,30,000 N/s, respectively and the global speed of the engine was determined to be 47.75 Hz for these values. The effective and the indicated work of the engine were determined to be 113 and 126 J, respectively.