Prenatal diagnosis of mosaicism for triploidy and trisomy 13

Mosaicism for trisomy 13 and triploidy was detected by amniocentesis performed at 18 weeks' gestation because of fetal anomalies. Pregnancy continued and a live-born male was delivered vaginally at 37 weeks. The infant had features common to both trisomy 13 and triploidy: intrauterine growth retardation (IUGR), small abnormal ears, cleft palate, and a small jaw. In addition, he had complete cutaneous syndactyly of fingers 3 and 4 and partial syndactyly of the toes, as seen in triploidy. Mixoploidy for trisomy 13 and triploidy was confirmed postnatally in blood, skin, and placenta. Examination of chromosome heteromorphisms and DNA markers suggested the presence of two maternal contributions in the triploid cell line. In addition, the extra chromosome 13 in the trisomic cell line was derived from the mother. Copyright © 2001 John Wiley & Sons, Ltd.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

An introduction to reverse logistics for environmental management: A new system to support sustainability and profitability

The private-sector marketplace has identified the reengineering of the structure and management of the supply chain as a great untapped business opportunity. In traditional supply chains poorly structured operational and financial decision making institutionalized the poor management of material resources. This nonoptimized management process results in the generation of impaired material resources, which leads to solid and hazardous waste, as well as additional operating costs throughout the supply chain. The way in which the marketplace is addressing the issue of impaired material resources is by transferring the ownership and liability of impaired resources from the customer back to the supplier. The marketplace is also implicitly saying that the supplier must redesign its products to eliminate/minimize waste, or if the supplier fails to accomplish this goal, the supplier will be forced to absorb the costs associated with managing impaired material resources. The ramifications of this change are truly of historical proportions. The utility of a material resource to create wealth has throughout the centuries almost always required its ownership. Ownership has also denoted that the owner accept any liabilities created by the material resource. This is now all about to change. To support this change, a vastly expanded infrastructure and new management systems will have to be developed. This article shows how to manage the supply chain and impaired material resources. The new system that will operationally and financially manage these changes as well as create new organizational decision-making drivers is Reverse Logistics Management (RLM).     

Processing and Morphology Impacts on Mechanical Properties of Fungal Based Biopolymer Composites

Fungal based biopolymer matrix composites with lignocellulosic agricultural waste as the filler are a viable alternative for some applications of synthetic polymers. This research provides insight into the impact of the processing method and composition of agriwaste/fungal biopolymer composites on structure and mechanical properties. The impact of nutrition during inoculation and after a homogenization step on the three-point bend flexural modulus and strength was determined. Increasing supplemental nutrition at inoculation had little effect on the overall composite strength or modulus; however, increasing carbohydrate loading after a homogenization step increased flexural stress at yield and bulk flexural modulus. The contiguity of the network formed was notably higher in the latter scenario, suggesting that the increase in modulus and strength of the final composite after homogenization was the result of contiguous hyphal network formation, which improves the integrity of the matrix and the ability to transfer load to the filler particles.     

Monitoring a changing Arctic: Recent advancements in the study of sea ice microbial communities

Sea ice continues to decline across many regions of the Arctic, with remaining ice becoming increasingly younger and more dynamic. These changes alter the habitats of microbial life that live within the sea ice, which support healthy functioning of the marine ecosystem and provision of resources for human-consumption, in addition to influencing biogeochemical cycles (e.g. air–sea CO₂ exchange). With the susceptibility of sea ice ecosystems to climate change, there is a pressing need to fill knowledge gaps surrounding sea ice habitats and their microbial communities. Of fundamental importance to this goal is the development of new methodologies that permit effective study of them. Based on outcomes from the DiatomARCTIC project, this paper integrates existing knowledge with case studies to provide insight on how to best document sea ice microbial communities, which contributes to the sustainable use and protection of Arctic marine and coastal ecosystems in a time of environmental change.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01658-z.     

Evaluation of airborne particulate matter and metals data in personal,indoor and outdoor environments using ED-XRF and ICP-MS and co-located duplicate samples

Factors and sources affecting measurement uncertainty associated with monitoring metals in airborne particulate matter (PM) were investigated as part of the Windsor, Ontario Exposure Assessment Study (WOEAS). The assessment was made using co-located duplicate samples and a comparison of two analytical approaches: ED-XRF and ICP-MS. Sampling variability was estimated using relative percent difference (RPD) of co-located duplicate samples. The comparison of ICP-MS and ED-XRF results yields very good correlations (R² ≥ 0.7) for elements present at concentrations that pass both ICP-MS and ED-XRF detection limits (e.g. Fe, Mn, Zn, Pb and Cu). PM concentration ranges (median, sample number) of 24-h indoor PM₁₀ and personal PM₁₀ filters, and outdoor PM_2.5 filters were determined to be 2.2–40.7 (11.0, n = 48) μg m^?3, 8.0–48.3 (11.9, n = 48) μg m^?3, and 17.1–42.3 (21.6, n = 18) μg m^?3, respectively. The gravimetric analytical results reveal that the variations in PM mass measurements for same-day sampling are insignificant compared to temporal or spatial variations: 92%, 100% and 96% of indoor, outdoor and personal duplicate samples, respectively, pass the quality criteria (RPD ≤ 20%). Uncertainties associated with ED-XRF elemental measurements of S, Ca, Mn, Fe and Zn for 24-h filter samples are low: 78%–100% of the duplicate samples passed the quality criteria. In the case of 24-h filter samples using ICP-MS, more elements passed the quality criteria due to the lower detection limits. These were: Li, Na, K, Ca, Si, Al, V, Fe, Mn, Co, Cu, Mo, Ag, Zn, Pb, As, Mg, Sb, Sn, Sr, Th, Ti, Tl, and U. Low air concentrations of metals (near or below instrumental detection limits) and/or inadvertent introduction of metal contamination are the main causes for excluding elements based on the pass/fail criteria. Uncertainty associated with elemental measurements must be assessed on an element-by-element basis.     

Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Cyclodextrins: a new efficient absorbent to treat waste gas streams

Volatile Organic Compounds (VOCs) in the air provoke health and environmental concerns. This paper focuses on the absorption method to treat industrial polluted air loaded with VOCs. The key variable of this treatment being the choice of a suitable liquid absorbent, the aim of this research work is to investigate the effectiveness and the regeneration of a new potential family of absorbent: cyclodextrins (CDs). All CDs derivatives tested are able to decrease the Henry's law constant of toluene: a reduction of volatility up to 95% may be obtained, depending on CD nature and concentration. Moreover, absorption experiments show that beta-CD, which presents the highest absorption ability, is 250 time more efficient than water. The absorption efficiency is not totally correlated with static experiments, suggesting that, in addition to Henry's law constants and inclusion compounds stability, toluene diffusion into such solutions has to be taken into account. It is also to be noted that salt and pH variations seem to have little influence on the absorption capacity of CDs, which may be of great interest for industrial applications. Finally, since production of solid compounds was not observed during these experiments and since temperature decreases the capture ability in a drastic way, regeneration of the washing solution can be achieved by heating the solution in combination with air stripping.