Municipal solid waste effective stress analysis

The mechanical behavior of municipal solid waste (MSW) has attracted the attention of many researchers in the field of geo-environmental engineering in recent years and several aspects of waste mechanical response under loading have been elucidated. However, the mechanical response of MSW materials under undrained conditions has not been described in detail to date. The knowledge of this aspect of the MSW mechanical response is very important in cases involving MSW with high water contents, seismic ground motion and in regions where landfills are built with poor operation conditions. This paper presents the results obtained from 26 large triaxial tests performed both in drained and undrained conditions. The results were analyzed taking into account the waste particles compressibility and the deformation anisotropy of the waste samples. The waste particles compressibility was used to modify the Terzaghi effective stress equation, using the Skempton (1961) proposition. It is shown that the use of the modified effective stress equation led to much more compatible shear strength values when comparing Consolidated-Drained (CD) and Consolidated-Undrained (CU), results, explaining the high shear strength values obtained in CU triaxial tests, even when the pore pressure is almost equal to the confining stress.     

Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.     

Physiological characteristics of <Emphasis Type="Italic">Plantago major</Emphasis> under SO<Subscript>2</Subscript> exposure as affected by foliar iron spray

Sulfur dioxide (SO₂) is considered as a main air pollutant in industrialized areas that can damage vegetation. In the present study, we investigated how exposure to SO₂ and foliar application of iron (Fe) would affect certain physiological characteristics of Plantago major. The plant seedlings exposed or unexposed to SO₂ (3900 μg m^?3) were non-supplemented or supplemented with Fe (3 g L^?1) as foliar spray. Plants were exposed to SO₂ for 6 weeks in 100 × 70 × 70 cm chambers. Fumigation of plants with SO₂ was performed for 3 h daily for 3 days per week (alternate day). Lower leaf Fe concentration in the plants exposed to SO₂ at no added Fe treatment was accompanied with incidence of chlorosis symptoms and reduced chlorophyll concentration. No visible chlorotic symptoms were observed on the SO₂-exposed plants supplied with Fe that accumulated higher Fe in their leaves. Both at with and without added Fe treatments, catalase (CAT) and peroxidase (POD) activity was higher in the plants fumigated with SO₂ in comparison with those non-fumigated with SO₂. Foliar application of Fe was also effective in increasing activity of antioxidant enzymes CAT and POD. Exposure to SO₂ led to reduced cellulose but enhanced lignin content of plant leaf cell wall. The results obtained showed that foliar application of Fe was effective in reducing the effects of exposure to SO₂ on cell wall composition. In contrast to SO₂, application of Fe increased cellulose while decreased lignin content of the leaf cell wall. This might be due to reduced oxidative stress induced by SO₂ in plants supplied with Fe compared with those unsupplied with Fe.     

Sorption-desorption of cadmium in aqueous palygorskite, sepiolite, and calcite suspensions: isotherm hysteresis

Sorption isotherms have been widely used to assess the heavy metal retention characteristics of soil particles. Desorption behavior of the retained metals, however, usually differ from that of sorption, leading to a lack of coincidence in the experimentally obtained sorption and desorption isotherms. In this study, we examine the nonsingularity of cadmium (Cd) sorption–desorption isotherms, to check the possible hysteresis and reversibility phenomena, in aqueous palygorskite, sepiolite and calcite systems. Sorption of Cd was carried out using a 24-h batch equilibration experiment with eight different Cd solution concentrations, equivalent to 20–100% of maximum sorption capacity of each mineral. Immediately after sorption, desorption took place using successive dilution method with five consecutive desorption steps. Both Cd sorption and desorption data were adequately described by Freundlich equation (0.81 < r² < 0.99). The sorption and desorption reactions, however, did not provide the same isotherms, indicating that hysteresis occurred in Cd sorption–desorption processes. The extent of hysteresis was quantified based on the differences obtained from sorption and desorption isotherms regarding the amount of Cd sorbed, the Freundlich exponent, and the Cd distribution coefficient. The results revealed that, sepiolite possessed the most hysteretic behavior among the minerals studied. Calcite showed much smaller hysteresis compared to the other two silicate clays at low Cd surface load, but its hysteresis indices significantly increased, and exceeded that of palygorskite, as the amount of Cd in the systems increased. The average amount of Cd released after five desorption steps, was 13.8%, 2.2% and 3.6% for the palygorskite, sepiolite and calcite, respectively, indicating that a large portion of Cd was irreversibly retained by the minerals.     

A laboratory study on the MSW mechanical behavior in triaxial apparatus

Shear strength characterization of MSW materials is a mandatory task when performing analyses related to landfill design and landfill geometry improvements. Despite the considerable amount of research focusing on MSW mechanical behavior there remain certain aspects which are not completely understood and deserve attention in particular the case of the undrained behavior of MSW. This paper presents the results of a comprehensive laboratory testing program using a large-scale triaxial apparatus at the Federal University of Bahia, Salvador, Brazil. The effect of factors such as confining pressure, unit weight, fiber content, rate of loading and over-consolidation on the MSW mechanical response were investigated. Tested samples presented typical MSW shear/strain curves (concave upward) in all the tests, despite the pore water pressure reaching levels almost equal to the confining pressure. The obtained results show that increasing confining stress, unit weight, loading rate, fiber content and over-consolidation lead to an increase in the MSW shear strength. The importance of the fibrous components in the waste behavior is highlighted and graphs showing the variation of the MSW shear strength with fiber content in different drainage conditions are shown. The authors believe these results could be of interest to many companies, especially considering the new trend of plastic material recycling (prior landfilling) for energy recovery purposes.     

Evaluation of physico-chemical properties of biochar-based mixtures for soilless growth media

Journal of Material Cycles and Waste Management - This study was done to evaluate the suitability of biochar-based mixtures for growth media. Biochars from agricultural wastes were produced by slow...