Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

A fuzzy goal programming with interval target model and its application to the decision problem of renewable energy planning

Environmental and Ecological Statistics - Optimizing sustainable renewable energy portfolios is one of the most complicated decision making problems in energy policy planning. This process involves...     

Evaluation and selection strategy for green supply chain using interval-valued q-rung orthopair fuzzy combinative distance-based assessment

Environment, Development and Sustainability - Environmental deterioration and global warming has created a substantial impact on international companies to incorporate eco-friendly, green supply...     

Tourism: economic development without increasing CO2 emissions in Pakistan

Environment, Development and Sustainability - Globally, the national and cultural resources of a country are major sources of attraction for tourism. Pakistan is gifted with abundant natural and...     

Toxicity of Water-Soluble Fractions of Four Fuels for Metamysidopsis insularis, an Indigenous Tropical Mysid Species

The toxicity of the water-soluble fraction (WSF) of four fuels (leaded gasoline, unleaded gasoline, diesel, Jet A-1) to Metamysidopsis insularis, an indigenous tropical mysid species was determined. Approximately 10 000 barrels (bbl) of fuel are consumed daily in Trinidad and Tobago, and about 50 000 bbl are exported. Accidental discharges at points of transfer as well as from inadequate storage facilities, can pose a significant contamination risk to the environment. Organisms were assayed with the WSF under both UV and fluorescent lights. The WSF was prepared using different fuel/seawater (v/v) mixtures. It was found that organisms exposed to diesel, Jet A-1 and unleaded gasoline showed similar toxicological responses under both light regimes, and were more toxic than the leaded gasoline. The results also showed that none of these fuels show photo-induced toxicity. The WSF of the 0.1% mixtures of unleaded gasoline, diesel and Jet A-1 were acutely toxic to M. insularis. However, for the leaded gasoline, only the 0.5% mixture was acutely toxic. The high toxicity of these fuels may be due to the presence of light, more soluble fractions. It is therefore likely that these fuels will have significant impacts in our local environment, if any spills occur.     

Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Surface‐ and deep‐level diversity in workgroups: examining the moderating effects of team orientation and team process on relationship conflict

The increased use of teams in organizations, coupled with an increasingly diverse workforce, strongly suggests that we should learn more about how team diversity affects functioning and performance. The purpose of this study was to explore the differential impact of surface‐level diversity (gender, ethnicity), deep‐level diversity (time urgency, extraversion), and two moderating variables (team orientation, team process) on relationship conflict over time. Hypotheses were tested by tracking 45 student project teams in a longitudinal design. Results revealed that team orientation and team process moderated the diversity–conflict link. Specifically, team orientation helped to neutralize the negative effects of surface‐level (gender) diversity on relationship conflict. In a similar manner, team processes worked to weaken the deleterious effects of deep‐level diversity (time urgency) on relationship conflict. In addition, relationship conflict resulted in lower perceived performance by team members. Copyright © 2004 John Wiley & Sons, Ltd.     

Correction to: Radical scavenging and antiproliferative effect of novel phenolic derivatives isolated from Nerium indicum against human breast cancer cell line (MCF-7)—an in silico and in vitro approach

Environmental Science and Pollution Research - The correct presentation of the Author names are shown in this paper.     

Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.