不同来源腐殖酸的光解及过氧化氢对其影响

为探讨腐殖酸在环境中的行为及光解除去腐殖酸的可能性，利用大于２９０ｎｍ的模拟日光辐照，探讨了大骨节病病区、非病区腐殖酸和泥炭腐殖酸的光解过程和光解机理及过氧化氢对其光解的影响，发现随着光照时间的延长，腐殖酸水体系的总有机碳（ＴＯＣ）含量降低，ｐＨ值下降，过氧化氢可以促进腐殖酸的光解，其光解过程遵循一级动力学规律。计算了不同来源腐殖酸光解的速率及光解半衰期，发现土壤和泥炭腐殖酸比大骨节病病区饮水中腐     

Fate of organo‐heavy metal complexes of sludges from domestic wastes in soils: A simplified modelization

Simplified models provided information on the binding ability of organic acids with trace elements, the distribution of the formed organo‐heavy metal complexes at different pH, and the biological stability (biodegradation ability) of these complexes.     

Monitoring an outdoor smoking area by means of PM<Subscript>2.5</Subscript> measurement and vegetal biomonitoring

The extension of pollutant accumulation in plant leaves associated with its genotoxicity is a common approach to predict the quality of outdoor environments. However, this approach has not been used to evaluate the environmental quality of outdoor smoking areas. This study aims to evaluate the effects of environmental tobacco smoke (ETS) by assessing particulate matter 2.5 μm (PM_2.5) levels, the pollen abortion assay, and trace elements accumulated in plant leaves in an outdoor smoking area of a hospital. For this, PM_2.5 was measured by active monitoring with a real time aerosol monitor for 10 days. Eugenia uniflora trees were used for pollen abortion and accumulated element assays. Accumulated elements were also assessed in Tradescantia pallida leaves. The median concentration of PM_2.5 in the smoking area in all days of monitoring was 66 versus 34 μg/m³ in the control area (P?<?0.001). In addition, the elements Al, Cd, Cu, Ni, Pb, Rb, Sb, Se, and V in Tradescantia pallida and Al, Ba, Cr, Cu, Fe, Mg, Pb, and Zn in Eugenia uniflora were in higher concentration in the smoking area when compared to control area. Smoking area also showed higher rate of aborted grains (26.1?±?10.7 %) compared with control (17.6?±?4.5 %) (P?=?0.003). Under the study conditions, vegetal biomonitoring proved to be an effective tool for assessing ETS exposure in outdoor areas. Therefore, vegetal biomonitoring of ETS could be a complement to conventional analyses and also proved to be a cheap and easy-handling tool to assess the risk of ETS exposure in outdoor areas.     

Alpha-thalassaemia prenatal diagnosis by two PCR-based methods

In Cyprus all couples carrying α⁰-thalassaemia mutations are detected in the course of the thalassaemia carrier screening program and prenatal diagnosis is offered to all of them. Prenatal diagnosis for α-thalassaemia is routinely done by two independent molecular methods. With the first method, the mutations of the parents are directly determined by gap-PCR and then the chorionic villus sample (CVS) is examined for the presence of these mutations. With the other method, a (CA)_n repeat polymorphic site located between the ψα₁- and α₂-globin genes is used for determining the presence or absence of the normal and mutant alleles. In the period from 1995 to 1999, molecular analysis of 46 couples in which haematological data were consistent with deletion of two α-globin genes in both partners indicated that only 13 of them were actually at risk for haemoglobin (Hb) Bart's hydrops fetalis and prenatal diagnosis was provided in 16 pregnancies. The molecular diagnosis was possible in all cases with the use of both gap-PCR and (CA)_n repeat polymorphisms analysis. No misdiagnosed cases for α-thalassaemia have been reported to date. Copyright © 2001 John Wiley & Sons, Ltd.     

Evaluation of genotoxic effects of benzene and its derivatives in workers of gas stations

The search for reliable biomarkers of human exposure to benzene and its derivatives is still subject of research. Many of the proposed biomarkers have limitations ranging from the low sensitivity to the wide variability of results. Thus, the aim of our study was to assess the frequencies of chromosomal abnormalities (CA) and sister chromatid exchanges (SCE) in workers of gas stations, with (cases, n?=?19) and without (local controls, n?=?6) risk of exposure to benzene and its derivatives, comparing them with the results from the general population (external controls, n?=?38). The blood dosages of benzene, toluene, and xylenes were measured in all participants. Blood solvent levels were compared with the findings obtained in cytogenetic evaluation and a research protocol which included data of the workplace, lifestyle, and health of the individuals. We did not detect the presence of benzene and its derivatives and did not find chromosomal damage that may be associated with the gas station activity in cases. Moreover, although we found an association of increased SCE and the working time in the local controls, the values found for SCE are within normal limits. Thus, our evaluation of SCE and CA reflected the levels of benzene and its derivatives observed in the blood. We believe, therefore, that SCE and CA may actually constitute possible tests for the evaluation of these exposures. However, we believe that further studies, including individuals at risk, are important to confirm this assertion.     

Development of a basic procedure to design sorption processes

The intention of this work is to offer, within the shortest time, an appropriate sorption separation process for almost any odour problem. The development is based on the preparation and characterisation of new adsorbents, the strategy for the selection of the best adsorbent, the process engineering and the choice of a suitable regeneration procedure. In this context a new method for the characterisation of the adsorbents - the adsorption profile analysis - was developed. The classification of the adsorbents was carried out by means of a cluster analysis, which simplifies the selection of the most suitable adsorbent for a particular problem. The physical and chemical behaviour of silica-adsorbents could be tailored by silanisation of the surfaces. Methods for the determination of process engineering parameters were developed, established and used. Adsorption kinetics and isotherms were determined with a magnetic adsorption balance. In a laboratory-scale fixed bed adsorber, breakthrough curves of different support materials were investigated and compared. For the investigations of different regeneration procedures, four innovative methods were employed: microwave desorption, ultrasonic desorption, ultrasonic-water desorption and extraction with water. Of the four desorption methods examined, microwave desorption and ultrasonic-water desorption demonstrated the best results.