Introduced and cryptogenic species in Port Phillip Bay, Victoria, Australia

Port Phillip Bay (PPB) is a large (1,930 km²), temperate embayment in southern Victoria, Australia. Extensive bay-wide surveys of PPB have occurred since 1840. In 1995/1996 the Commonwealth Scientific and Industrial Research Organization (CSIRO) Centre for Research on Introduced Marine Pests (CRIMP) undertook an intensive evaluation of the region with the aims of developing a comprehensive species list of native and introduced biota and contrasting previous bay-wide assessments with a current field survey in order to detect new incursions and discern alterations to native communities. Two methods were used to meet these aims: a re-evaluation of regional museum collections and published research in PPB to identify and determine the timing of introductions; and field surveys for benthic (infauna, epifauna and encrusting) organisms between September 1995 to March 1996. One hundred and sixty introduced (99) and cryptogenic (61) species were identified representing over 13% of the recorded species of PPB. As expected, the majority of these are concentrated around the shipping ports of Geelong and Melbourne. Invasions within PPB appear to be increasing, possibly due to an increase in modern shipping traffic and an increase in aquaculture (historically associated with incidental introductions); however the records of extensive biological surveys suggest that this may, in part, be an artefact of sampling effort. In contrast to Northern Hemisphere studies, PPB (and Southern Hemisphere introductions in general) have significantly different suites of successfully invading taxa. PPB is presented as one of the most invaded marine ecosystems in the Southern Hemisphere.Communicated by M.S. Johnson, Crawley     

The organic composition of diesel particulate matter, diesel fuel and engine oil of a non-road diesel generator

Diesel-powered equipment is known to emit significant quantities of fine particulate matter to the atmosphere. Numerous organic compounds can be adsorbed onto the surfaces of these inhalable particles, among which polycyclic aromatic hydrocarbons (PAHs) are considered potential occupational carcinogens. Guidelines have been established by various agencies regarding diesel emissions and various control technologies are under development. The purpose of this study is to identify, quantify and compare the organic compounds in diesel particulate matter (DPM) with the diesel fuel and engine oil used in a non-road diesel generator. Approximately 90 organic compounds were quantified (with molecular weight ranging from 120 to 350), which include alkanes, PAHs, alkylated PAHs, alkylbenzenes and alkanoic acids. The low sulfur diesel fuel contains 61% alkanes and 7.1% of PAHs. The identifiable portion of the engine oil contains mainly the alkanoic and benzoic acids. The composition of DPM suggests that they may be originated from unburned diesel fuel, engine oil evaporation and combustion generated products. Compared with diesel fuel, DPM contains fewer fractions of alkanes and more PAH compounds, with the shift toward higher molecular weight ones. The enrichment of compounds with higher molecular weight in DPM may be combustion related (pyrogenic).     

Energy use and transport correlation linking personal and travel related energy uses to the urban structure

This paper considers relationships between sustainability objectives, transport, spatial design of the built environment and rational use of energy. Conventional transport modelling, housing supply and energy assessment tools are drawn together to provide a common platform for appraisal of city-wide energy use by stationary and mobile sources. The paper outlines methodologies developed for the city of Belfast, Northern Ireland. The paper concludes by briefly reviewing the effect in terms of mobile and stationary energy consumption and travel behaviour of implementing sustainable policy measures in current and future years within the study area.     

Maternal age specific rates for chromosome aberrations and factors influencing them: Report of a collaborative european study on 52 965 amniocenteses

Maternal age specific rates for all major chromosome aberrations have been determined in 52 965 pregnancies in mothers 35 years of age and over at the time of amniocentesis. Rates increase exponentially with advancing maternal age for trisomies 21, 18 and 13, and for the XXX and XXY syndromes, but in the autosomal trisomies this rise appears to be followed by a levelling off at the upper end of the age range. A significant inverse relationship with maternal age is found for 45,X cases. It is postulated that these various patterns are the result of the interaction of three principal factors: a maternal age effect acting particularly on first meiotic nondisjunction: a higher spontaneous abortion rate with advancing maternal age for aneuploid as compared to euploid conceptions; and an increased probability of spontaneous abortion before the time of amniocentesis for conceptions with more extensive chromosome imbalance. A stepwise logistic regression analysis of 13 299 pregnancies in which both parental ages are known shows that the father's age does not influence these maternal age specific rates, with the possible exception of the 47,XXY syndrome.     

Estimating the risk of a fetal autosomal trisomy at mid-trimester using maternal serum alpha fetoprotein and age: A retrospective study of 142 pregnancies

Risks appropriate for mid-trimester prenatal screening for autosomal trisomies have been estimated from a combination of maternal age and maternal serum (MS) alpha-fetoprotein (AFP) levels at 16–20 weeks gestation. Published data on the frequency of Down's syndrome births relative to maternal age were modified to include the additional age-related frequency of trisomy 18 and trisomy 13 cases to provide an overall risk for an autosomal trisomy at midtrimester. MSAFP results from a retrospective study of 142 affected (114 trisomy 21, 19 trisomy 18, and 9 trisomy 13)and 113 000 unaffected pregnancies were converted to multiples of the appropriate gestational median (MOM). The AFP levels in the autosomal trisomy pregnancies were found to be significantly reduced at 0.72 MOM of the unaffected pregnancies. Risks (likelihood ratios) were derived from the overlapping log Gaussian distributions for affected and unaffected pregnancies and combined with maternal age risks to give the overall odds of an affected pregnancy. A mid-trimester cut-off risk of 1:280 gave an estimated 37 per cent detection rate for autosomal trisomies in the west of Scotland population for a follow-up (false-positive) rate of 6.6 per cent. These figures compare with a 30 per cent detection and 6.7 per cent false-positive rate if age 35 years and over is used as the sole criterion for selection of at-risk pregnancies.     

A participatory approach to the establishment of a baseline scenario for a reforestation Clean Development Mechanism project

This paper is part of a two-year study to investigate the feasibility of initiating a Clean Development Mechanism (CDM) project in an indigenous community of Eastern Panamá, Ipetí-Emberá. We use participatory mapping and matrices as well as household surveys to develop a land-use/land-cover baseline scenario and examine the role of local participation in assessing land-use change. In Ipetí, land-use change has not occurred in a linear way over the last decades, and our data unveils socio-economic factors as potential key drivers of change. The concordance that we observed between geographic information and individual and collective perceptions of land-use change substantiates the possibility of using local knowledge in the establishment of baseline data for CDM projects. Our calculations suggest that the total carbon (C) stocks in the Tierra Colectiva (TC) of Ipetí-Emberá in 2004 represents a 47% reduction from the estimated C stock at the onset of settlement in the early 1970’s. Results from the participatory assessments predict that, in 2024 and in absence of a CDM project, the C stocks will decline from 301,859 t C in 2004 to 155,730 t C, which constitutes a reduction of 52%. The scenario with CDM estimates C stocks of 305,853 t C for 2024, a value slightly superior to the 2004 value. In the TC there is ground to believe that cattle ranching is likely to become an ever more important activity as the population is young and growing and cannot easily move elsewhere. Forests tend to be cleared for cultivation while pastures are established on short fallows. Our baseline scenario underlines the potential for a CDM project to make a significant difference in the future C stocks of this landscape.     

Ergonomics and safety of manual bag sealing.

A variety of seals is used to close bags. Each seal has advantages and disadvantages. For shop assistants sealing bags could be a repetitive physically demanding action. Opening and closing the bags again can cause some discomfort or annoyance for consumers. Besides, it is an activity which can endanger safety, i.e., knives being used in opening, children swallowing the systems of sealing. To prevent these problems a new sealing system was developed. In this paper the opinion of shop assistants, consumers and experts on several bag sealing systems was studied. It appeared that for sealing plastic bags, adhesive tape with paper is the best out of 4 systems, closely followed by adhesive tape. It is discussed that for the elderly, there is still room for improvement in opening bag seals.     

Co-pyrolysis of swine manure with agricultural plastic waste: Laboratory-scale study

Manure-derived biochar is the solid product resulting from pyrolysis of animal manures. It has considerable potential both to improve soil quality with high levels of nutrients and to reduce contaminants in water and soil. However, the combustible gas produced from manure pyrolysis generally does not provide enough energy to sustain the pyrolysis process. Supplementing this process may be achieved with spent agricultural plastic films; these feedstocks have large amounts of available energy. Plastic films are often used in soil fumigation. They are usually disposed in landfills, which is wasteful, expensive, and environmentally unsustainable. The objective of this work was to investigate both the energetics of co-pyrolyzing swine solids with spent plastic mulch films (SPM) and the characteristics of its gas, liquid, and solid byproducts. The heating value of the product gas from co-pyrolysis was found to be much higher than that of natural gas; furthermore, the gas had no detectable toxic fumigants. Energetically, sustaining pyrolysis of the swine solids through the energy of the product gas could be achieved by co-pyrolyzing dewatered swine solids (25% m/m) with just 10% SPM. If more than 10% SPM is used, the co-pyrolysis would generate surplus energy which could be used for power generation. Biochars produced from co-pyrolyzing SPM and swine solid were similar to swine solid alone based on the surface area and the ¹H NMR spectra. The results of this study demonstrated the potential of using pyrolysis technology to manage two prominent agricultural waste streams (SPM and swine solids) while producing value-added biochar and a power source that could be used for local farm operations.