Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.     

Fabrication of PVA/GO Nanofiber Films by Electrospinning: Application for the Adsorption of Cu2+ and Organic Dyes

Journal of Polymers and the Environment - In recent years, the treatment of water pollution has been a challenging and far-reaching topic. In order to improve the adsorption performance of...     

A highly sensitive spectrophotometric determination of micro amounts of vanadium(V) in environmental and alloy samples by using 3,4-dihydroxybenzaldehydeisonicotinoylhydrazone (3,4-DHBINH)

3, 4-Dihydroxybenzaldehydeisonicotinoylhydrazone was prepared, characterized with spectral analyses and used for developing a new method for the simple, sensitive and rapid spectrophotometric determination of vanadium(V) which gives maximum absorbance at wave length 360 nm. The metal ion gives a yellow colored complex with 3, 4-DHBINH in acetate buffer of pH 5.5 with 1:1 (metal:ligand) composition. The method obeys Beer's law in the range 0.5-5.3 mug mL(-1) of vanadium(V). The molar absorptivity and Sandell's sensitivity were found to be 1.29 x 10(4) L mol(-1) cm(-1) and 0.003949 mug cm(-2) respectively. The correlation co-efficient of the V(V)-3, 4-DHBINH complex was 0.992 which indicated an excellent linearity between the two variables. The repeatability of the method was checked by finding the relative standard deviation (RSD) as 0.424% (n = 5), and its detection limit 0.01677 mug mL(-1) of vanadium(V). The instability constant of the method was calculated by Asmus' method as 4.1666 x 10(-3). The interfering effect of various cations and anions were also studied. The proposed method was successfully applied to the determination of vanadium(V) in environmental samples (water and soil) tobacco leaves and alloy samples. The validity of the method was tested by comparing the results with those obtained using an atomic absorption spectrophotometer.     

Experimental Investigation of Cellulose/Silver Nanocomposites Using In Situ Generation Method

Cellulose gel films were prepared by regeneration process using pre-cooled aq.(8 wt% LiOH + 15 wt% urea) mixture as solvent and ethyl alcohol as non solvent. The Terminus cattapa leaf extract diffused wet cellulose films were then dipped in 1–5 mM aq.AgNO₃ solutions to allow in situ generation of silver nanoparticles (AgNPs). Besides the in situ generation, some AgNPs were also formed outside the wet films in the solution. The AgNPs formed outside the films were observed under transmission electron microscope and scanning electron microscope. The nanocomposite films were also characterized by Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis and tensile test. The thermal stability of the composite films was lower than that of the matrix up to a temperature of ~300 °C and afterwards showed a reverse trend. The tensile strength of the nanocomposite films was found to be higher than the matrix but decreased with increasing concentration of aq.AgNO₃. The cellulose/AgNPs composite films showed good antibacterial activity against E. coli (gram positive) and Bacillus sp. (gram negative). Based on the aforementioned properties, the cellulose/AgNPs composite films can be considered for antibacterial packaging and medical applications.     

Water-Blown Castor Oil-Based Polyurethane Foams with Soy Protein as a Reactive Reinforcing Filler

To decrease the usage of petroleum based materials, a kind of bio-resource based composite foams were developed with soy protein isolate (SPI) as reactive reinforcing filler in castor oil based polyurethane foams (PUF) prepared by self-rising method using water as a blowing agent. The resulting composite foams were evaluated for their morphology, density, mechanical and biodegradation properties, etc. Fourier transform infrared spectroscopy study exhibited characteristic peaks for SPI and PUF and indicated that the amino groups and hydroxyl groups on SPI reacted with polyphenyl polymethylene polyisocyanates (PAPI) to increase the crosslinking degrees of the composite foams. Densities of the resultant composites were found to increase with increasing SPI content. Mechanical properties of the samples were improved with the increase of SPI content. The compost tests further proved that the composite PUF had better biodegradability than neat PUF. Therefore, this research has provided a simple method of preparing the bio-resource based polyurethane foams, while exploring the potential of using SPI in polyurethane foam applications.     

Selective and sensitive extractive spectrophotometric determination of micro amounts of palladium(II) in spiked samples: using a new reagent N-ethyl-3-carbazolecarbaxaledehydethiosemicarbazone

N-Ethyl-3-cabazolecarboxaldehydethiosemicarbazone (ECCT) is proposed as a new, sensitive and selective complexing reagent for the separation and extractive spectrophotometric determination of palladium(II) at pH: 4.0 to form a yellowish orange colored 1:1 chelate complex, which is very well extracted in to n-butanol. The absorbance was measured at a maximum wavelength, 410 nm. This method obeys Beer’s law in the concentration range 0.0–6.6 μg mL⁻¹ and the correlation coefficient of Pd(II)-ECCT complex is 0.998, which indicates an excellent linearity between the two variables with good molar absorptivity and Sandell’s sensitivity, 1.647 × 10⁴ l mol⁻¹cm⁻¹, 6.49 × 10⁻³ μg cm⁻², respectively. The instability constant of complex calculated from Edmond’s method, 2.724 × 10⁻⁵ was in good agreement with the value calculated from Asmus’ method 2.624 × 10⁻⁵, at room temperature. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.839. Edmond’s method was observed to be a more selective method in the presence of EDTA, oxalate and phosphate ions. The method was successfully applied for the determination of Pd(II) in water samples, synthetic mixtures and hydrogenation catalysts, employing an atomic absorption spectrometer for comparing these results.     

Preparation and Properties of Propylene Glycol Plasticized Wheat Protein Isolate Novel Green Films

Novel bio-based green films were prepared using wheat protein isolate (WPI) by solution casting method using Propylene Glycol as a plasticizer for packaging applications. The effect of the plasticizer content (10, 15, 20 and 25 wt%) on mechanical properties (tensile strength, young’s modulus and  % of elongation) was investigated. A thermal degradation and phase transition of the prepared WPI was assessed by means of TGA and DSC analysis. The results showed that the tensile strength and young’s modulus decreased and  % of elongation increased with increasing PG content. The ATR-FTIR and SEM were used for structural characterization and morphology of the films, respectively. FTIR studies reveals that the intensity of the bands corresponding to the amide groups increases with increasing PG content tending to increase protein–PG interactions. Further, the glass transition temperature was decreased and the thermal stability of the WPI was found to be increased by plasticization. The overall thermal stability of the films was improved and is attributed to the increase in mobility of the polymer chains.     

Properties of Regenerated Cellulose Short Fibers/Cellulose Green Composite Films

Green composites of regenerated cellulose short fibers/cellulose were prepared by dissolving cellulose in a green solvent of 7% NaOH/12% Urea aqueous solution that was pre cooled at ?12?°C. The effect of fiber loading on the tensile, optical, thermal degradation and cell viability was studied. The tensile properties of cellulose were improved by the regenerated cellulose fiber reinforcement. The interfacial bonding between the fibers and matrix was assessed using the fractographs and found it to be good.