水解酸化＋两级生物接触氧化处理高盐度水产品加工废水

介绍了“水解酸化＋两级生物接触氧化”处理水产品加工废水的运行效果和工程实例，结果表明：对C1^-浓度平均6000mg／L的高盐度水产品加工废水，系统对COD、SS、氨氮的去除率分别超过了88％、90％、85％，出水COD、SS、氨氮分别低于100mg／L、70mg／L、15mg／L，出水完全可以达到《污水综合排放标准》（GB8978—1996）一级排放标准。     

In vitro characteristics of human fetal cells obtained from chorionic villus sampling and amniocentesis

In vitro characteristics of human fetal cells have been investigated after chorionic villus sampling at the first trimester and amniocentesis at the second trimester of pregnancy. Light microscopy revealed heterogeneous morphology of cell types in both the chorionic villus culture and the amniotic fluid cultures. Based on the experiments performed, chorionic villus cells are more sensitive to pronase, trypsin, and versene during subculture and have a higher DNA content per single cell and release more [¹²⁵I]-Beta-human chorionic gonadotropin into culture medium than those found in amniotic fluid cells. The practical applications of this study are discussed.     

酸碱度变化对日本三角涡虫生存及再生的影响

用自来水和去离子水配制不同的pH溶液，测定涡虫生存及再生的情况，以及涡虫可承受的pH变化幅度，确定日本三角涡虫对不同酸碱环境的耐受性。结果表明涡虫对酸碱环境的耐受力较强。     

SNP悬浮型填料处理生活污水

介绍了王台铺矿采用SNP悬浮型填料和先进的水下曝气技术对生活污水进行二级处理,与常规的半软性填料和鼓风曝气方法比较,投资少,成本低,管理方便,曝气均匀,水处理效果好。     

自然灾害变动的集成预测模型及其应用

本文提出了以非线性回归拟合发展趋势、正弦函数逼近周期变动和马尔可夫链刻划随机扰动的集成预测模型，并应用于山东省农业自然灾害成灾面积的变动规律模拟，得到了较好的预测效果。理论和实践表明，集成预测模型优于传统的单模型预测，为预测具有复杂机制的自然灾害演变提供了一种新方法。     

Sustainable pattern analysis of a publicly owned Material Recovery Facility in a fast-growing urban setting under uncertainty

Sustainable development goals are achievable through the installation of Material Recovery Facilities (MRFs) in certain solid waste management systems, especially those in rapidly expanding multi-district urban areas. MRFs are a cost-effective alternative when curbside recycling does not demonstrate long-term success. Previous capacity planning uses mixed integer programming optimization for the urban center of the city of San Antonio, Texas to establish that a publicly owned material recovery facility is preferable to a privatized facility. As a companion study, this analysis demonstrates that a MRF alleviates economic, political, and social pressures facing solid waste management under uncertainty. It explores the impact of uncertainty in decision alternatives in an urban environmental system. From this unique angle, waste generation, incidence of recyclables in the waste stream, routing distances, recycling participation, and other planning components are taken as intervals to expand upon previous deterministic integer-programming models. The information incorporated into the optimization objectives includes economic impacts for recycling income and cost components in waste management. The constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening restrictions. Due to the fragmented data set, a grey integer programming modeling approach quantifies the consequences of inexact information as it propagates through the final solutions in the optimization process. The grey algorithm screens optimal shipping patterns and an ideal MRF location and capacity. Two case settings compare MRF selection policies where optimal solutions exemplify the value of grey programming in the context of integrated solid waste management.     

填充柱(FID)-顶空气相色谱法测定水和废水中丙烯腈

本文用顶空气相色谱法测定水和废水中丙烯腈,具有简便、快速、灵敏、准确,干扰少,适用性强等优点,适用于不同类型的环境水样分析。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥pH、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的pH在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(mS/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

沼气增温与控制系统的设计与仿真

冬季北方寒冷地区温度偏低,难以满足大中型沼气厌氧发酵系统对于温度的要求。为了解决该问题,针对天津地区某奶牛场沼气工程,设计了一套回收发电机余热并辅助电加热为发酵罐体供热的沼气增温控制系统,且实验确定最佳控制温度为35℃。在该系统中,罐体内部均匀布置竖直型循环加热管路,从而使料液温度分布更加均匀,热响应更加迅速,6 d左右即可将发酵罐内发酵料液提升到所需最佳温度;另外,采用罐内部温度及循环水流量的反馈调节,使料液的温度波动维持在±1℃范围内,解决了在冬季由于温度过低而导致沼气产气率偏低、甚至停滞的问题;同时,采用MATLAB软件对基于F-PID及传统PID的温度控制系统进行了仿真。对比结果表明,F-PID控制器较传统PID控制器超调量减小3℃,响应时间缩短60%,表明F-PID系统具有更高的效率、稳定性及实用价值。     

聚氨酯泡沫材料阴燃发展过程的特性分析

分析对比了相同加热条件下的聚氨酯泡沫材料在有氧和无氧气氛下的升温过程,并对不同加热条件下的聚氨酯泡沫材料的阴燃传播速度进行研究.结果表明:沿着反应进行的方向,分离点的温度越来越低,不同热流条件下的温度分离曲线斜率在实验稳定发展段的变化规律表现得很相似,并在分离点出现后,有氧气氛中的该位置温度在短时间内急剧上升;在阴燃不稳定传播阶段时,热解前锋的速度小于氧化前锋的速度,在稳定传播阶段时,热解前锋速度与氧化前锋速度近乎相等.