Phytoremediation of landfill leachate using Pennisetum clandestinum

Landfills are still the most widely used solid waste disposal method used across the world. Leachate generated from landfill areas exerts environmental risks mostly on surface and groundwater, with its high pollutant content, most notably metals, which cause an unbearable lower water quality. During dumping or after the capacity of the landfill has been reached, a decontamination and remediation program should be taken for the area. This study was conducted to assess the capacity and efficiency of Pennisetum clandestinum, a prostrate perennial plant, to accumulate chromium (Cr), copper (Cu), iron (Fe), nickel (Ni), zinc (Zn) and lead (Pb). Leachate, taken from the Sofulu Landfill Site, was given to Pennisetum clandestinum for 180 days, in 3 dilution sets as 1/1, 1/2 and 1/4, in batch configuration. An additional control set was also installed for comparison. Results showed that, even though the metal content of soil had risen, plants accumulated 2 to 8.5 times higher concentrations than the control set. It is important to see, the plant showed almost no stress symptoms even if the set was fed by pure leachate. Pennisetum clandestinum was observed to accumulate metals mostly in the upper bodies, excluding Fe and Cu. 76% of accumulated Cr, 85% of Ni, 66% of Zn and 100% of Pb was observed to accumulate in above-ground parts, where only 20% of Cu and 4% of Fe was accumulated. Due to the high pollution tolerance of Pennisetum clandestinum, makes this plant suitable for decontamination and remediation of landfill sites.     

The effects of external costs on the system selection for treatment and disposal of municipal solid wastes: a deterministic case study for a pre-assessment

Journal of Material Cycles and Waste Management - Selecting a system for treatment and disposal of municipal solid wastes (i.e., selection of the capacity, location and type of the processes and...     

Life cycle assessment of solid waste management options for Eskisehir, Turkey

Life cycle assessment (LCA) methodology was used to determine the optimum municipal solid waste (MSW) management strategy for Eskisehir city. Eskisehir is one of the developing cities of Turkey where a total of approximately 750tons/day of waste is generated. An effective MSW management system is needed in this city since the generated MSW is dumped in an unregulated dumping site that has no liner, no biogas capture, etc. Therefore, five different scenarios were developed as alternatives to the current waste management system. Collection and transportation of waste, a material recovery facility (MRF), recycling, composting, incineration and landfilling processes were considered in these scenarios. SimaPro7 libraries were used to obtain background data for the life cycle inventory. One ton of municipal solid waste of Eskisehir was selected as the functional unit. The alternative scenarios were compared through the CML 2000 method and these comparisons were carried out from the abiotic depletion, global warming, human toxicity, acidification, eutrophication and photochemical ozone depletion points of view. According to the comparisons and sensitivity analysis, composting scenario, S3, is the more environmentally preferable alternative. In this study waste management alternatives were investigated only on an environmental point of view. For that reason, it might be supported with other decision-making tools that consider the economic and social effects of solid waste management.     

Stabilization of metal processing plant sludge via sequential application of phytoremediation and pyrolysis

The aim of this study is to evaluate the metal removal ability of three different plants from metal processing sludge containing Pb, Cd, and Zn. Therefore, phytoremediation and pyrolysis were sequentially applied. In the phytoremediation applications, sunflower (Helianthus annuus), corn (Zea mays), and rape (Brassica napus) seeds were sown in sludge/soil mixtures at four different levels (25/75, 50/50, 75/25, 100/0). The chelating agent, ethylenediaminetetraacetic acid, was added to the mixtures for plant uptake during phytoremediation. At the phytoremediation stage, it was noted that rape was the most effective plant for the mixture of 75/25 sludge/soil, with metal removal efficiencies ranging between 80%–90%. At the pyrolysis stage, after harvesting, contaminated plants grown in a 75/25 sludge/soil mixture were pyrolyzed at 500 °C, with a heating rate of 35 °C/min. The results show that 60%–90% of the initial metal content was held by the solid product. In addition to this, it can be concluded that pyrolysis stabilizes metals into a solid product and that this solid product can be safely landfilled as inert waste since its toxicity leaching value is lower than the limit values.     

Prenatal diagnosis of multiple pterygium syndrome associated with Klinefelter syndrome

A nonlethal form of multiple pterygium syndrome (MPS) was diagnosed prenatally at 16 weeks of gestation with associated Klinefelter syndrome in the same fetus. The ultrasound findings were cystic hygroma, hypertelorism, micrognathia, low-set ears, flexion contractures of upper and lower extremities and rocker-bottom foot. Genetic amniocentesis revealed a 47,XXY karyotype. After genetic counseling, the parents decided to have a therapeutic abortion. We presented this case for the purpose of further describing the early ultrasound findings and clinical features of multiple pterygium syndromes. Also, what makes our patient unique is the coincidental presence of Klinefelter syndrome with MPS. To our knowledge, this is the first case in the literature in which a 47,XXY karyotype has been found in a fetus with multiple pterygium syndrome. The importance of delineating the exact subtype of MPS and making a precise differential diagnosis becomes critical during the process of evaluation of patients with MPS. Copyright © 2003 John Wiley & Sons, Ltd.