Daily ingestion of 232Th, 238U, 226Ra, 228Ra and 210Pb in vegetables by inhabitants of Rio de Janeiro City

The concentrations of the naturally occurring radionuclides 232Th, 238U, 210Pb, 226Ra and 238Ra were determined in the vegetables (leafy vegetables, fruit, root, bean and rice) and derived products (sugar, coffee, manioc flour, wheat flour, corn flour and pasta) consumed most by the adult inhabitants of Rio de Janeiro City. A total of 88 samples from 26 different vegetables and derived products were analyzed. The highest contribution to radionuclide intake arises from bean, wheat flour, manioc flour, carrot, rice, tomato and potato consumption. The estimated daily intakes due to the consumption of vegetables and derived products are 1.9 mBq of 232Th (0.47 microg), 2.0 mBq of 238U (0.17 microg), 19 mBq of 236Ra, 26 mBq of 210Pb and 47 mBq of 228Ra. The estimated annual effective dose due to the ingestion of vegetables and their derived products with the long-lived natural radionuclides is 14.5 microSv. Taking into account literature data for water and milk from Rio de Janeiro the dose value increases to 29 microSv, with vegetables and derived products responsible for 50% of the dose and water for 48%. 210Pb (62%) and 228Ra (24%) were found to be the main sources for internal irradiation.     

Post-flooding disaster crop diversity recovery: a case study of Cowpea in Mozambique

To restore food security to a traditional African cropping system following a sudden loss of seed, genetic diversity must be re-established. This study examines the extent to which Cowpea diversity was reinstated two years after a flood disaster in Gaza Province, Mozambique. The contribution that seed from various sources made to the recovery was assessed using semi-structured interviews and morphological and molecular data. Data suggest that diversity had recovered to some extent yet there was evidence of a narrowing of the genetic base, with fewer rare alleles and differences in the distribution of allele frequencies. Although the main channels for accessing seed after the flood were seed relief and markets, these sources contributed to minimal and different diversity. It appears that diversity was regained primarily through social networking in the form of loans or gifts of seed from friends and relatives. The results of the study are discussed in relation to seed relief approaches.     

Methane generation in tropical landfills: simplified methods and field results

This paper deals with the use of simplified methods to predict methane generation in tropical landfills. Methane recovery data obtained on site as part of a research program being carried out at the Metropolitan Landfill, Salvador, Brazil, is analyzed and used to obtain field methane generation over time. Laboratory data from MSW samples of different ages are presented and discussed; and simplified procedures to estimate the methane generation potential, Lo, and the constant related to the biodegradation rate, k are applied. The first order decay method is used to fit field and laboratory results. It is demonstrated that despite the assumptions and the simplicity of the adopted laboratory procedures, the values Lo and k obtained are very close to those measured in the field, thus making this kind of analysis very attractive for first approach purposes.     

Evaluation of landfill leachate treatment by advanced oxidative process by Fenton’s reagent combined with membrane separation system

A high content of refractory organic matter, ammonia and toxic compounds is characteristic of landfill leachate. Advanced oxidative processes (AOPs) are an attractive alternative for landfill leachate treatment. However, when applied as a unique process treatment, they do not provide a complete solution for the effluent treatment. Combining AOP with a membrane separation process (MSP) presents a number of benefits and provides an adequate solution for this problem. With this in mind, the present work aims to evaluate, using a bench scale, leachate treatability through AOP by Fenton’s reagent (AOP/Fenton) combined with microfiltration (MF) and nanofiltration (NF). A high efficient removal of COD (63%), true color (76%) and humic substances (50%) was observed during AOP/Fenton under optimized conditions (1.7 g H₂O₂/g COD_{raw leachate}; FeSO₄·7H₂O:H₂O₂ = 1:5.3; pH = 3.8; reaction conditions = 115 rpm/28 min). According to the evaluated parameters, MSP presented an efficient complementary treatment, in which the integrity of the stages was sufficient for reaching regulatory levels in the effluent (Deliberação Normativa Conjunta COPAM/CERH-MG N^o. 1, May 5, 2008).     

Enhancing submerged coastal constructions by incorporating multifunctional purposes

Surfing has becoming more and more attractive in the past few decades, constituting nowadays an important source of revenue for many countries with extensive coastlines. For this purpose and also for environmental reasons, the conventional ways of protecting a coastline appear to entail some disadvantages. An innovative and interesting way of improving surfing capacities and contributing to protect a local coastal zone is by means of multifunctional artificial reefs. A multifunctional artificial reef (MFAR) is a submerged structure that serves several purposes; in particular, it may enhance the surfing possibilities and the environmental value of the local area. This structure has some promising new aspects, too: first, it provides an unimpaired visual amenity; second, it offers tourist and economic benefits by improving the surfing conditions; third, it can enhance the environmental value of the area where it is built, and fourth, if designed properly, the down drift erosion can be minimal. An appropriate reef design in terms of ‘surfability’, i.e. the possibility to surf a wave, for the Leirosa beach, located to the south of Figueira da Foz, midway along Portugal’s West Atlantic coast, has been investigated. In order to achieve the best design several steps were conducted. First, the performance of the Boussinesq-type COULWAVE model is tested with experimental data. Next, this numerical model is used to define the best values for three design parameters: reef angle; geometry of the reef (without or with a platform), and horizontal dimensions for the appropriate geometry. A preliminary design was achieved step by step, making use of the theory and of the state of the art of multifunctional reefs. This reef geometry is used in the numerical study. In terms of ‘surfability’ and for the conditions of the local coastline of Leirosa, the following values were found for the main parameters: a reef angle of 66°; a structure height of 3.20 m; a reef geometry composed of a delta without a platform; a reef submergence of 1.50 m, and a structure seaward slope of 1:10.     

Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.     

Biodegradation or simple adsorption to the support material? Development of a simple, fast and low-cost technique

Biofilms are present in several areas and are studied in microbiology, medical sciences, biology and, of course, sanitary engineering. Biofilms are used for the treatment of municipal wastewater, and their application was even before the invention of the activated sludge process. The main objective of this work was to develop a simple, fast and low-cost technique to evaluate the nature of the first decay in the concentration of an organic compound in the presence of a solid material. Though simple, the technique developed has allowed the clarification of whether the initial concentration decay is due to adsorption to the support material or a result of biodegradation. The results show that, with two different support materials, adsorption does not take place, and the biodegradation processes are responsible for the first decay in the organic concentration. The technique used offers a fast and low-cost way of studying the existence of adsorption. Two feed concentration solutions and two different support materials were used.     

A Characterization of Selected Endocrine Disruptor Compounds in a Portuguese Wastewater Treatment Plant

Anthropogenic compounds that are able to disrupt the endocrine system of wildlife species are a major cause for concern and have led to a demand for new screening methods. The identification and quantification of endocrine disruptor compounds at wastewater treatment plant is of major interest to assess the endocrine activity of wastewater treatment plant discharges into the environment. This study consists of a preliminary survey of concentrations of previously selected endocrine disruptor compounds, undertaken to establish environmental concentrations and to support a biological program assay exposing freshwater fish to them. Selected endocrine disrupting chemicals (APEs, bisphenol A and 17 β-estradiol) were measured in samples from a wastewater treatment plant located in Lisbon (Portugal), using recent commercial enzyme-linked immunosorbent assay kits and also LC-MS/MS. The results show that the wastewater treatment plant treatment process is efficient on the removal of target endocrine disruptor compounds. However, environmentally significant concentrations are still present in the treated effluent. The results also show that enzyme-linked immunosorbent assay kit is suitable for routine analysis of the selected compounds. The results are also useful since the wastewater treatment plant is located in a Mediterranean region, which results in an effluent with its own characteristics.     

Preparation and Characterization of Clay Nanocomposites of Plasticized Starch and Polypropylene Polymer Blends

Plasticized starch (PLS) is a renewable, degradable, and inexpensive polymer, but it suffers from poor mechanical properties. The mechanical properties can be improved by blending PLS with polyolefins, nonetheless, at high PLS content, the mechanical properties remain poor. Here we show that addition of clay can greatly improve the mechanical properties of PLS/polypropylene blends at high starch content. Unmodified and organically modified montmorillonite clays, MMT and Cloisite 30B respectively, were added to blends of glycerol-plasticized starch and polypropylene, compatibilized using maleated polypropylene. TEM indicates that MMT is well dispersed in the PLS phase of the blends, while Cloisite 30B is located both within the PLS phase as well as at the interface between PLS and PP. At high PLS content, the addition of clay increased the tensile strength and tensile modulus by an order of magnitude, while reducing the ultimate elongation only slightly. Such improvements are attributable to both the addition of clay as a reinforcing component, as well as to the change in the two phase morphology due to addition of clay.