Prenatal diagnosis of Apert syndrome: report of two cases

Two de novo cases with Apert Syndrome detected prenatally are presented herein. In the first, fetal ultrasound findings of syndactyly of the hands, craniosynostosis and proptosis resulted in a prenatal diagnosis in the nineteenth week of gestation. This is the earliest prenatal diagnosis of this syndrome in a not-at-risk case. Following counseling, this pregnancy was terminated and subsequent pathological examination and DNA analysis confirmed the diagnosis of Apert Syndrome and coarctation of the aorta. In the second case, fetal ultrasound at 21 weeks' gestation revealed a hypoplastic left heart and clover-leaf skull. Following counseling, this pregnancy was also terminated. Further examination of the fetus and DNA analysis led to a diagnosis of Apert Syndrome. These cases emphasize the need to complete a thorough fetal ultrasound in cases with potentially lethal cardiac abnormality and the importance of incorporating a fetal pathologist, as well as a medical geneticist, in the investigations performed after delivery or pregnancy termination when a fetal abnormality is detected on ultrasound. Copyright © 2003 John Wiley & Sons, Ltd.     

短期干旱胁迫对马尾松排放挥发性有机物的影响

为探究干旱环境对BVOCs排放的影响,应用动态封闭式采样系统和热脱附-气相色谱-飞行质谱仪,对短期干旱胁迫作用下马尾松的BVOCs排放进行了实验室测量,定量分析BVOCs排放速率和排放组成的变化.结果表明,干旱胁迫时异戊二烯的排放受到抑制,排放速率降低约50%;单萜烯和倍半萜烯的排放水平增强,排放速率分别为137.85和0.98μg/（m²·h）,是未受胁迫时的2.9和2.0倍.除反式-α-香柠檬烯外,干旱胁迫促进各单萜烯和倍半萜烯化合物的排放,是未受胁迫时的1.3~42.4倍,其中3-蒈烯排放的响应最敏感,α-葑烯、α-水芹烯和石竹烯的响应最弱.干旱胁迫时单萜烯和倍半萜烯的排放组成有所变化,但主导的化合物种类不变,单萜烯以α-蒎烯、香桧烯和β-蒎烯为主,占比分别为48%、17%和17%;倍半萜烯以石竹烯和长叶烯为主,占比分别为57%和34%.     

Identification and field bioassays of the sex pheromone of the yellow-legged clearwing Synanthedon vespiformis (Lepidoptera: Sesiidae)

The yellow-legged clearwing (YLC) Synanthedon vespiformis (Lepidoptera: Sesiidae) occurs in the Mediterranean and central Europe. It is polyphagous, boring into the woody parts of broadleaf species including forest trees as well as various Rosaceae species. S. vespiformis has been reported as an economically important pest causing severe injury to stone fruit plantations. Many attractants for sesiid species were discovered by random field screening using 2,13- and 3,13-octadecadienyl alcohols, acetates and aldehydes, including one for S. vespiformis; and about 20 sex pheromones of sesiids have been identified so far. In the present study we identified the natural composition of the sex pheromone of YLC laboratory reared females as a blend of E3,Z13- and Z3,Z13-octadecadienyl acetates, at a ratio of 4:1. We developed an efficient lure for monitoring the pest. Pheromone funnel traps with rubber septa, impregnated with 1 mg pheromone blend, efficiently captured males for 10 weeks. Suspension of Shin-Etsu^? ropes containing a 2:1 blend of E3,Z13-18:Ac and Z3,Z13-18:Ac at 13.74 mg/ha/h, resulted in shutdown of trap catches in the treated plots and closely situated neighboring plots indicating that mating disruption is feasible.     

Downscaling and visioning of mountain snow packs and other climate change implications in North Vancouver, British Columbia

This paper provides an overview of a collaborative study on visualizing climate change at the local scale. A conceptual framework has been developed, in which local scenarios and visualizations of climate change impacts and response were created to facilitate local dialogue on incorporating climate change into long-term planning and implementation of community development decisions. As part of a larger effort to generate a new integrated participatory visioning process, this paper describes a case study of the District of North Vancouver which created visualizations of changing mountain snow and landscape conditions, and provides new insights on issues and dilemmas in using realistic landscape visualizations to depict scientific modelling projections, local responses to climate change, and uncertainty. Results from this study suggest that the visualizations, and subsequent dialogue sessions, did influence emotional response to climate change as well as self-assessed understanding of adaptation and mitigation response options. However, there is a need to test this visioning process with larger heterogeneous groups of participants in order to better assess its effectiveness in enabling dialogue on local responses to climate change.     

Linking Water Science to Policy: Results from a Series of National Workshops on Water

To ensure science better informs the decision-making process, researchers and policy/program managers need to understand and respect each other's way of working, culture and operational timelines. However, there is little practical guidance on how this should be done and even less documented experience with specific mechanisms that better link these two groups. The published literature on information transfer has largely emphasized the dissemination of standard packages of information to ill-defined constituencies whose needs for scientific information are not well understood. Environment Canada's National Water Research Institute, on behalf of the Canadian Council of Ministers of the Environment, led a series of “Linking Water Science to Policy Workshops” as one such mechanism by which recent science could be delivered to practitioners, and practitioners could identify their research needs to scientists and research managers. There is a pressing need to explore and share experiences using creative mechanisms for sustained dialogue and networking between scientists and policy and program managers. The lessons learned from the workshop series and the need for science to continually inform the decision-making process has particular relevance for Canada's Ecosystem Initiatives given their integrated, place-based focus on long-term restoration and protection, and the challenge of continually changing ecosystems.The Canadian Crown reserves the right to retain a non-exclusive, royalty free licence in and to any copyright.     

Simulating the meteorology and PM10 concentrations in Arizona dust storms using the Weather Research and Forecasting model with Chemistry (Wrf-Chem)

Nine dust storms in south-central Arizona were simulated with the Weather Research and Forecasting with Chemistry model (WRF-Chem) at 2 km resolution. The windblown dust emission algorithm was the Air Force Weather Agency model. In comparison with ground-based PM₁₀ observations, the model unevenly reproduces the dust-storm events. The model adequately estimates the location and timing of the events, but it is unable to precisely replicate the magnitude and timing of the elevated hourly concentrations of particles 10 µm and smaller ([PM₁₀]).Furthermore, the model underestimated [PM₁₀] in highly agricultural Pinal County because it underestimated surface wind speeds and because the model’s erodible fractions of the land surface data were too coarse to effectively resolve the active and abandoned agricultural lands. In contrast, the model overestimated [PM₁₀] in western Arizona along the Colorado River because it generated daytime sea breezes (from the nearby Gulf of California) for which the surface-layer speeds were too strong. In Phoenix, AZ, the model’s performance depended on the event, with both under- and overestimations partly due to incorrect representation of urban features. Sensitivity tests indicate that [PM₁₀] highly relies on meteorological forcing. Increasing the fraction of erodible surfaces in the Pinal County agricultural areas improved the simulation of [PM₁₀] in that region. Both 24-hr and 1-hr measured [PM₁₀] were, for the most part, and especially in Pinal County, extremely elevated, with the former exceeding the health standard by as much as 10-fold and the latter exceeding health-based guidelines by as much as 70-fold. Monsoonal thunderstorms not only produce elevated [PM₁₀], but also cause urban flash floods and disrupt water resource deliveries. Given the severity and frequency of these dust storms, and conceding that the modeling system applied in this work did not produce the desired agreement between simulations and observations, additional research in both the windblown dust emissions model and the weather research/physicochemical model is called for.

Implications: While many dust storms can be considered to be natural, in semi-arid climates such storms often have an anthropogenic component in their sources of dust. Applying the natural, exceptional events policy to these storms with strong signatures of anthropogenic sources would appear not only to be misguided but also to stifle genuine regulatory efforts at remediation. Those dust storms that have resulted, in part, from passage over abandoned farm land should no longer be considered “natural”; policymakers and lawmakers need to compel the owners of such land to reduce its potential for windblown dust.     

Reclaimed Mineland Curve Number Response to Temporal Distribution of Rainfall1

Warner, Richard C., Carmen T. Agouridis, Page T. Vingralek, and Alex W. Fogle, 2010. Reclaimed Mineland Curve Number Response to Temporal Distribution of Rainfall. Journal of the American Water Resources Association (JAWRA) 46(4): 724-732. DOI: 10.1111/j.1752-1688.2010.00444.x Abstract: The curve number (CN) method is a common technique to estimate runoff volume, and it is widely used in coal mining operations such as those in the Appalachian region of Kentucky. However, very little CN data are available for watersheds disturbed by surface mining and then reclaimed using traditional techniques. Furthermore, as the CN method does not readily account for variations in infiltration rates due to varying rainfall distributions, the selection of a single CN value to encompass all temporal rainfall distributions could lead engineers to substantially under- or over-size water detention structures used in mining operations or other land uses such as development. Using rainfall and runoff data from a surface coal mine located in the Cumberland Plateau of eastern Kentucky, CNs were computed for conventionally reclaimed lands. The effects of temporal rainfall distributions on CNs was also examined by classifying storms as intense, steady, multi-interval intense, or multi-interval steady. Results indicate that CNs for such reclaimed lands ranged from 62 to 94 with a mean value of 85. Temporal rainfall distributions were also shown to significantly affect CN values with intense storms having significantly higher CNs than multi-interval storms. These results indicate that a period of recovery is present between rainfall bursts of a multi-interval storm that allows depressional storage and infiltration rates to rebound.     

Fire Regimes and Tree Growth in Low Rainfall Jarrah Forest of South-west Australia

Regular fuel reduction burning is an important management strategy for reducing the scale and intensity of wildfires in south-west Australian native forests, but the long term effects of this on tree and stand growth are not well understood. Five fire treatments, including application of frequent and infrequent low intensity burns, and 25 years of fire exclusion, were applied to small (4 ha) experimental plots in a low rainfall mixed jarrah (Eucalyptus marginata) and marri (Corymbia calophylla) forest to investigate the effects of these treatments on tree stem diameter growth, stand basal area increment and tree mortality. Mean tree stem growth measured over 20 years was lowest in the long unburnt treatment compared with the burn treatments, although surface soil nutrient levels were generally higher in the unburnt treatment, suggesting these sites may be moisture limited. There was no clear pattern of the effects of the burn treatments, including the number of fires and the interval between fires, on tree stem growth, stand basal area increment, crown health or mortality. These factors were strongly influenced by dominance condition, with dominant and co-dominant trees growing most and suppressed trees growing least and experiencing the highest mortality levels. There was no evidence of deteriorating tree or stand health that could be attributed to either regular low intensity burning or to a long period (25 years) of fire exclusion.     

Stack Sampling of Hygroscopic Particulates In an Entrained Water Environment

Reference methods for the determination of mercury emissions from stationary sources typically include collection of mercury by solutions which are acidic and oxidizing. In the presence of high levels of SO₂ the oxidizing capacity of these absorbing solutions will be degraded and the collection efficiency for mercury compromised. This seriously limits the usefulness of the reference methods as they apply to the mining and smelting industries. In the present work peroxide is used to remove SO₂ and acidic permanganate is used to collect mercury. At a mean sampling rate of 10 L/min concentrations of at least 12 mg/m³ mercury can be satisfactorily collected in the presence of up to 20,000 ppm SO₂.     

Exhaust Temperature Profiles for Application of Passive Diesel Particulate Filters to Solid Waste Collection Vehicles in California

Abstract

To reduce public exposure to diesel particulate matter (DPM), the California Air Resources Board has begun adoption of a series of rules to reduce these emissions from in-use heavy-duty vehicles. Passive diesel particulate filter (DPF) after-treatment technologies are a cost-effective method to reduce DPM emissions and have been used on a variety of vehicles worldwide. Two passive DPFs were interim-verified in California and approved federally for use in most 1994–2002 engine families for vehicles meeting min engine exhaust temperature requirements for successful filter regeneration. Some vehicles, however, may not be suited to passive DPFs because of lower engine exhaust temperatures. The purpose of this study was to determine the applicability of two types of passive DPFs to solid waste collection vehicles, the group of vehicles for which California recently mandated in-use DPM reductions. We selected 60 collection vehicles to represent the four main types of collection vehicle duty cycles—roll-offs, and front-end, rear, and side loaders—and collected second-by-second engine exhaust temperature readings for one week from each vehicle. As a group, the collection vehicles exhibited low engine exhaust temperatures, making the application of passive DPFs to these vehicles difficult. Only 35% of tested vehicles met the temperature requirements for one passive DPF, whereas 60% met the temperature requirements for the other. Engine exhaust temperatures varied by vehicle type. Side and front-end loaders met the engine exhaust temperature requirements in the greatest number of cases with ～50–90% achieving the required regeneration temperatures. Only 8–25% of the rear loader and roll-off collection vehicles met the engine exhaust temperature requirements. Solid waste collection vehicles represent a diverse fleet with a variety of duty cycles. Low engine exhaust temperatures will need to be addressed for successful use of passive DPFs in this application.