Estimated occupational risk from bioaerosols generated during land application of class B biosolids

Some speculate that bioaerosols from land application of biosolids pose occupational risks, but few studies have assessed aerosolization of microorganisms from biosolids or estimated occupational risks of infection. This study investigated levels of microorganisms in air immediately downwind of land application operations and estimated occupational risks from aerosolized microorganisms. In all, more than 300 air samples were collected downwind of biosolids application sites at various locations within the United States. Coliform bacteria, coliphages, and heterotrophic plate count (HPC) bacteria were enumerated from air and biosolids at each site. Concentrations of coliforms relative to Salmonella and concentrations of coliphage relative to enteroviruses in biosolids were used, in conjunction with levels of coliforms and coliphages measured in air during this study, to estimate exposure to Salmonella and enteroviruses in air. The HPC bacteria were ubiquitous in air near land application sites whether or not biosolids were being applied, and concentrations were positively correlated to windspeed. Coliform bacteria were detected only when biosolids were being applied to land or loaded into land applicators. Coliphages were detected in few air samples, and only when biosolids were being loaded into land applicators. In general, environmental parameters had little impact on concentrations of microorganisms in air immediately downwind of land application. The method of land application was most correlated to aerosolization. From this large body of data, the occupational risk of infection from bioaerosols was estimated to be 0.78 to 2.1%/yr. Extraordinary exposure scenarios carried an estimated annual risk of infection of up to 34%, with viruses posing the greatest threat. Risks from aerosolized microorganisms at biosolids land application sites appear to be lower than those at wastewater treatment plants, based on previously reported literature.     

EPA worst case water microcosms for testing phage biocontrol of Salmonella

A microplate method was developed as a tool to test phages for their ability to control Salmonella in aqueous environments. The method used EPA (U.S. Environmental Protection Agency) worst case water (WCW) in 96-well plates. The WCW provided a consistent and relatively simple defined turbid aqueous matrix, high in total organic carbon (TOC) and total dissolved salts (TDS), to simulate swine lagoon effluent, without the inconvenience of malodor and confounding effects from other biological factors. The WCW was originally defined to simulate high turbidity and organic matter in water for testing point-of-use filtration devices. Use of WCW to simulate lagoon effluent for phage testing is a new and innovative application of this matrix. Control of physical and chemical parameters (TOC, TDS, turbidity, temperature, and pH) allowed precise evaluation of microbiological parameters (Salmonella and phages). In a typical application, wells containing WCW were loaded with Salmonella enterica susp. enterica serovar Typhimurium (ATCC14028) and treated with phages alone and in cocktail combinations. Mean Salmonella inactivation rates (k, where the lower the value, the greater the inactivation) of phage treatments ranged from -0.32 to -1.60 versus -0.004 for Salmonella controls. Mean log(10) reductions (the lower the value, the greater the reduction) of Salmonella phage treatments were -1.60 for phage PR04-1, -2.14 for phage PR37-96, and -2.14 for both phages in a sequential cocktail, versus -0.08 for Salmonella controls. The WCW microcosm system was an effective tool for evaluating the biocontrol potential of Salmonella phages.     

Comparison of selected nutrients and bacteria from common contiguous soils inside and outside swine lagoon effluent spray fields after long-term use

Swine (Sus scofa domestica) lagoon effluent is a valuable resource. In the U.S. Mid-South it is applied from April to September to fertilize grass hay in spray-irrigated fields. Lagoon levels of nutrients and bacteria, and soil levels of nutrients have been documented, but little was known of effluent bacterial levels in soil. The present study examined levels of selected effluent bacteria and nutrients in soils inside and outside spray fields after >15 yr of effluent irrigation. Samples were collected February to March 2009 from contiguous soils spanning adjacent irrigated and nonirrigated areas. Separate soil cores for bacterial and nutrient tests were collected in pairs <10 cm apart. Five cores each were collected at 15-m intervals and combined, respectively, to comprise inside and outside samples from each of 20 soils (four each from five farms/spray fields). Analyses of data combined across all soils showed higher pH and Mehlich-3-extracrable (M3-) P, Mg, K, Na, Cu, and Zn inside than outside spray fields, while total N, total C, M3-Ca, and M3-Mn did not differ. Bacterial levels were higher inside than outside spray fields for heterotrophic plate counts, thermotolerant coliforms, Staphylococcus spp., and Clostridium perfringens, but levels of Escherichia coli and Enterococcus spp. were not different. Cultural presence/absence tests for three pathogens (Listeria spp., Campylobacter spp., and Salmonella spp.) detected only Listeria spp., which did not differ inside (23% positive samples) and outside (28% positive). Molecular tests detected all three pathogens at low levels that were not different inside and outside. We found no evidence of cumulative buildup of Campylobacter spp., Listeria spp., or Salmonela s. in spray field soils.     

pH-Dependent fate and transport of NTA-complexed cobalt through undisturbed cores of fractured shale saprolite

The codisposal of toxic metals and radionuclides with organic chelating agents has been implicated in the facilitated transport of the inorganic contaminants away from primary waste disposal areas. We investigated the transport of Co(II)NTA through undisturbed cores of fractured shale saprolite. Experiments were conducted across the pH range 4 to 8 by collecting cores from different locations within the weathering profile. Aqueous complexation, adsorption, dissociation and oxidation reactions influenced Co(II)NTA transport. The suite of reaction products identified in column effluent varied with experimental pH. At low pH and in the presence of abundant exchangeable aluminum, Co transport occurred predominantly as the Co2+ ion. At higher pH, Co was transported primarily as Co(II)NTA and the Co(III) species Co(III)(HNTA)2 and Co(III)(IDA)2. The formation of the geochemical oxidation products (Co(III) species) has far reaching implications as these compounds are kinetically and thermodynamically stable, are transported more rapidly than Co(II)NTA, and are resistant to biodegradation. These results demonstrate that natural minerals, in the physical structure encountered naturally, can be more important in the formation of mobile, stable contaminant forms than they can be for the retardation and dissociation of the contaminants.     

Response of Ceriodaphnia dubia to ionic silver: discrepancies among model predictions, measured concentrations and mortality

Silver thiosulfate, often a waste product of photoprocessing, is less bioavailable or toxic to aquatic organisms than is ionic silver. We conducted duplicate 48-h Ceriodaphnia dubia tests in reconstituted laboratory water using treatments of 92.7 nM Ag+ with various concentrations of thiosulfate. Expected Ag+ concentrations were generated for thiosulfate treatment levels using MINEQL + chemical equilibrium modeling. Ag+ concentrations in treatments were determined using a novel silicon-based sensor. Based on predicted Ag+ and published 48-h LC50 values for C. dubia, we did not expect to observe adverse effects. Yet, 100% mortality was observed at low thiosulfate treatments, whereas > 85% and > 95% survival was observed at higher thiosulfate treatment levels, respectively. Our results indicate that biotic responses match the sensor-based Ag+ concentrations. However, there is a discrepancy between these empirical results and responses expected to occur with Ag+ concentrations as predicted by MINEQL + chemical modeling. By correlating silicon sensor data with toxicity results obtained from our laboratory, our work clearly relates a specific chemical form (Ag+) to toxicity results.     

Vapor flammability above aqueous solutions of flammable liquids

The flammability of vapors above aqueous solutions of ethanol and acetonitrile was studied experimentally in a 20-L combustion apparatus. No liquid was present in the apparatus, but the vapor concentrations were adjusted to correspond to the vapor in equilibrium with a specified aqueous solution. The experimental results for these two systems show that

• As water is added to the vapor, the lower boundary of the flammability zone decreases. For ethanol, the lower flammability limits (LFL) decreases from 3.7% for pure vapor to 3.2% with saturated water vapor. For acetonitrile, the decrease is from 4.2% to 3.8%. Thus, to a good approximation, the water vapor can be treated as an inert, enabling the data to be displayed on a single flammability triangle diagram. This provides a very simplified method for estimating the flammable behavior for aqueous solutions.

• The upper boundary of the flammability zone is unchanged with the addition of water.

• The limiting oxygen concentration (LOC) is essentially constant for all concentrations of aqueous solutions. The LOC for the pure solvent may be used as a universal LOC for all solvent concentrations.

• The vapor mixture above the aqueous solution is not flammable below a certain liquid mol fraction of flammable. The flammable concentration at which this occurs can be called the maximum safe solvent concentration (MSSC). A method is presented to determine the MSSC from experimental flammability data.

• The oxygen concentration defining the flammable boundary for the vapor decreases rapidly from the MSSC and then increases as the liquid solvent concentration increases.

The calculated adiabatic flame temperature (CAFT) method qualitatively predicts the same behavior as the experimental data.     

Correlation of human olfactory responses to airborne concentrations of malodorous volatile organic compounds emitted from swine effluent

Direct multicomponent analysis of malodorous volatile organic compounds (VOCs) present in ambient air samples from 29 swine (Sus scrofa) production facilities was used to develop a 19-component artificial swine odor solution that simulated olfactory properties of swine effluent. Analyses employing either a human panel consisting of 14 subjects or gas chromatography were performed on the air stream from an emission chamber to assess human olfactory responses or odorant concentration, respectively. Analysis of the olfactory responses using Fisher's LSD statistics showed that the subjects were sensitive to changes in air concentration of the VOC standard across dilutions differing by approximately 16%. The effect of chemical synergisms and antagonisms on human olfactory response magnitudes was assessed by altering the individual concentration of nine compounds in artificial swine odor over a twofold concentration range while maintaining the other 18 components at a constant concentration. A synergistic olfactory response was observed when the air concentration of acetic acid was increased relative to the concentration of other VOC odorants in the standard. An antagonistic olfactory response was observed when the air concentration of 4-ethyl phenol was increased relative to the other VOC odorants in the standard. The collective odorant responses for nine major VOCs associated with swine odor were used to develop an olfactory prediction model to estimate human odor response magnitudes to swine manure odorants through measured air concentrations of indicator VOCs. The results of this study show that direct multicomponent analysis of VOCs emitted from swine effluent can be applied toward estimating perceived odor intensity.     

Native ecotypic variation and the role of host identity in the spread of an invasive herbivore, Cactoblastis cactorum

Environmental niche models (ENMs) have gained enormous popularity as tools to investigate potential changes in species distributions resulting from climate change and species introductions. Despite recognition that species interactions can influence the dynamics of invasion spread, most implementations of ENMs focus on abiotic factors as the sole predictors of potential range limits. Implicit in this approach is the assumption that biotic interactions are relatively unimportant, either because of scaling issues, or because fundamental and realized niches are equivalent in a species' native range. When species are introduced into exotic landscapes, changes in biotic interactions relative to the native range can lead to occupation of different regions of niche space and apparent shifts in physiological tolerances. We use an escaped biological control organism, Cactoblastis cactorum (Berg.), to assess the role of the environmental envelope as compared with patterns of host-herbivore associations based on collections made in the native range. Because all nonnative populations are derived from a single C. cactorum ecotype, we hypothesize that biotic interactions associated with this ecotype are driving the species' invasion dynamics. Environmental niche models constructed from known native populations perform poorly in predicting nonnative distributions of this species, except where there is an overlap in niche space. In contrast, genetic isolation in the native range is concordant with the observed pattern of host use, and strong host association has been noted in nonnative landscapes. Our results support the hypothesis that the apparent shift in niche space from the native to the exotic ranges results from a shift in biotic interactions, and demonstrate the importance of considering biotic interactions in assessing the risk of future spread for species whose native range is highly constrained by biotic interactions.     

Effect of surface incorporation of broiler litter applied to no-till cotton on runoff quality

Surface application of broiler litter to no-till cotton could lead to degradation of water quality. Incorporation of broiler litter into the top surface soil (0.05 m) could alleviate this risk. A 2-yr field study was conducted on a silt loam upland soil to determine the effect of incorporation of broiler litter into the soil surface on nutrient and bacterial transport in runoff. The experimental design was a randomized complete block with four treatments and three replications. Treatments were (i) unfertilized control; (ii) surface-appliedbroiler litter at 7.8 Mg ha(-1) without incorporation; (iii) surface-applied broiler litter at 7.8 Mg ha(-1) with immediate incorporation; and (iv) inorganic fertilizer N (urea ammonium nitrate, 32% N) and inorganic fertilizer P (triple superphosphate) at the recommended rate. Phosphorus was surface appliedat 25 kg ha(-1) and N was injected at 101 kg ha(-1) into the soil using a commercial liquid fertilizer applicator. Runoff was collected from small runoff plots (2.4 m by 1.6 m) established at the bottom side of main plots (13.7 m by 6.0 m). Incorporation of broiler litter reduced total N (TN), NO3-N, water soluble P (WSP), and total P (TP) concentrations in runoffby 35, 25, 61, and 64%, respectively, and litter-associated bacteria by two to three orders of magnitude compared with unincorporated treatment. No significant difference in total suspended solids (TSS) in runoffwas obtained between incorporated and unincorporated treatments. Incorporation of broiler litter into the surface soil in the no-till system immediately after application minimized the potential risk for surface nutrient losses and bacteria transport in runoff.