The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.     

Reliability of police-reported information for determining crash and injury severity

Posted speed limit and police-reported injury codes are commonly used by researchers to approximate vehicle impact and occupant injury severity. In-depth crash investigations, however, produce more precise measures of crash and injury severity: change in velocity (delta-V) for crash severity and Abbreviated Injury Scale (AIS) scores for injury severity. A comparison of data from police crash reports with that gathered by National Automotive Sampling System (NASS) investigators highlighted the inadequacy of speed limit and police injury codes as proxies for delta-V and AIS injury severity. In general, delta-V increased with speed limit and higher values of AIS were associated with higher police-coded injury severity, but there were a number of anomalies. In particular, 49% of the drivers coded by police as having incapacitating injuries actually had sustained no more than minor injuries. This overstatement of injury severity was less frequent among male (44%) and elderly (37%) drivers than among female (53%) and nonelderly (50%) drivers. Also, 79% of the investigated vehicles that crashed on roads posted at 60 mph (96 km/h) or higher experienced a delta-V less than 25 mph (40 km/h). Safety studies depending on data from only police reports to establish injury or crash severity therefore could produce erroneous results.     

LCA of the South African sugar industry

A life cycle assessment of sugar produced in South Africa evaluates the environmental impacts and energy consumption of the different life cycle phases of sugar production. The system studied includes sugar cane farming, fertiliser and herbicide manufacture, cane burning, sugar cane transportation and sugar manufacture. Inventory and impact assessment results show that non-renewable energy consumption is 5350 MJ per tonne of raw sugar produced and 40% of this is from fertiliser and herbicide manufacture. Reduction in the use or impact of fertiliser for cane farming could bring considerable savings in terms of fossil energy consumption and a reduction in greenhouse gas emissions.     

Specific Conductance and pH as Indicators of Watershed Disturbance in Streams of the New Jersey Pinelands, USA

/ We used linear regression to independently and jointly relate specific conductance and pH measured at New Jersey Pinelands stream sites to the percentage of altered land in a watershed. Percentage altered land included developed and agricultural land uses and represented watershed disturbance for a given site. Median values calculated for a 2-year period (September 1992 through August 1994) characterized pH and specific conductance at the study sites. We found the relationships between the median values for both water-quality measures and percentage altered land for a site to be consistent across subregion and dominant altered-land use. Our results also demonstrated that the water-quality/altered-land relationships developed using median values were similar to relationships developed using data from any single-sample period within the entire study period. Individually, pH and specific conductance explained 48% and 56%, respectively, of the variability in watershed disturbance among study sites. The joint use of pH and specific conductance explained 79% of the watershed disturbance variability among sites. The joint use of these easily obtained water-quality measures can provide a quick assessment of instream water-quality impacts from upstream watershed disturbance at any Pinelands stream site. Additionally, a range in pH and specific conductance, and hence a range in ambient water quality, can be predicted for a given altered-land percentage or a change in existing altered-land conditions.     

Integrating long-term stewardship goals into the remediation process: natural resource damages and the Department of Energy

The United States and other developed countries are faced with restoring and managing degraded ecosystems. Evaluations of the degradation of ecological resources can be used for determining ecological risk, making remediation or restoration decisions, aiding stakeholders with future land use decisions, and assessing natural resource damages. Department of Energy (DOE) lands provide a useful case study for examining degradation of ecological resources in light of past or present land uses and natural resource damage assessment (NRDA). We suggest that past site history should be incorporated into the cleanup and restoration phase to reduce the ultimate NRDA costs, and hasten resource recovery. The lands that DOE purchased over 50 years ago ranged from relatively undisturbed to heavily impacted farmland, and the impact that occurred from DOE occupation varies from regeneration of natural ecosystems (benefits) to increased exposure to several stressors (negative effects). During the time of the DOE releases, other changes occurred on the lands, including recovery from the disturbance effects of farming, grazing, and residential occupation, and the cessation of human disturbance. Thus, the injury to natural resources that occurred as a result of chemical and radiological releases occurred on top of recovery of already degraded systems. Both spatial (size and dispersion of patch types) and temporal (past/present/future land use and ecological condition) components are critical aspects of resource evaluation, restoration, and NRDA. For many DOE sites, integrating natural resource restoration with remediation to reduce or eliminate the need for NRDA could be a win-win situation for both responsible parties and natural resource trustees by eliminating costly NRDAs by both sides, and by restoring natural resources to a level that satisfies the trustees, while being cost-effective for the responsible parties. It requires integration of remediation, restoration, and end-state planning to a greater degree than is currently done at most DOE sites.     

Rubber and pulp plantations represent a double threat to Hainan's natural tropical forests

Hainan, the largest tropical island in China, belongs to the Indo-Burma biodiversity hotspot and harbors large areas of tropical forests, particularly in the uplands. The Changhua watershed is the cradle of Hainan's main river and a center of endemism for plants and birds. The watershed contains great habitat diversity and is an important conservation area. We analyzed the impact of rubber and pulp plantations on the distribution and area of tropical forest in the watershed, using remote sensing analysis of Landsat images from 1988, 1995 and 2005. From 1988 to 1995, natural forest increased in area (979-1040?sq?km) but decreased rapidly (763?sq?km) over the next decade. Rubber plantations increased steadily through the study period while pulp plantations appeared after 1995 but occupied 152?sq?km by 2005. Rubber and pulp plantations displace different types of natural forest and do not replace one another. Because pulp is not as profitable as rubber and existing pulp processing capacity greatly exceeds local supply, considerable pressure exists on remaining upland forests. We recommend for future management that these plantation forests be reclassified as 'industrial', making a clear policy distinction between natural and industrial forestry. Additionally, the local government should work to enforce existing laws preventing forest conversion on marginal and protected areas.