Violating the psychological contract: Not the exception but the norm

The occurrence and impact of psychological contract violations were studied among graduate management alumni (N = 128) who were surveyed twice, once at graduation (immediately following recruitment) and then two years later. Psychological contracts, reciprocal obligations in employment developed during and after recruitment, were reported by a majority of respondents (54.8 per cent) as having been violated by their employers. The impact of violations are examined using both quantitative and qualitative data. Occurrence of violations correlated positively with turnover and negatively with trust, satisfaction and intentions to remain.     

Fetal exsanguination following intrauterine angiographic assessment and selective termination of a hydrocephalic,monozygotic co-twin

Selective termination by intracardiac potassium chloride injection was performed in twins discordant for hydrocephaly at 20 weeks' gestation. Because of the potential for vascular anastomoses to exist between the twins, fetal angiography was performed prior to the selective termination procedure. Determination of vascular connections between the fetuses was hindered by fetal bradycardia following intracardiac administration of contrast material. Selective termination was performed without difficulty using intracardiac potassium chloride (KCl) to produce asystole in the twin with hydrocephaly. The unaffected fetus appeared active and had a normal heart rate during and immediately after the procedure. However, both twins were found to have died the following day. Pathologic examination documented several vascular anastomoses between the monochorionic, diamniotic fetuses. A likely cause of death was exsanguination of the normal twin into the abnormal one. This case illustrates the difficulties encountered in selective termination of monozygotic twins and, to our knowledge, represents the first reported use of intrauterine fetal angiography.     

Block Copolymers Containing (R)-3-Hydroxybutyrate and Isosorbide Succinate or (S)-Lactic Acid Mers

A new aliphatic block copolyester was synthesized in bulk from transesterification techniques between poly((R)-3-hydroxybutyrate) (PHB) and poly(isosorbide succinate) (PIS). Additionally, other two block copolyesters were synthesized in bulk either from transesterification reactions involving PHB and poly(l-lactide) (PLLA) or from ring-opening copolymerization of l-lactide and hydroxyl-terminated PHB, as result of a previous transesterification reactions with isosorbide. Two-component blends of PHB and PIS or PLLA were also prepared as comparative systems. SEC, MALDI-TOF mass spectrometry (MALDI-TOFMS), ¹H and ¹³C NMR spectroscopy, WAXD, solubility tests, and TG thermal analysis were used for characterization. The block copolymer structures of the products were evidenced by MALDI-TOFMS, ¹³C NMR, and WAXD data. The block copolymers and the corresponding binary blends presented different solubility properties, as revealed by solubility tests. Although the incorporation of PIS sequences into PHB main backbone did not enhance the thermal stability of the product, it reduced its crystallinity, which could be advantageous for faster biodegradation rate. These products, composed of PHB and PIS or PLLA sequences, are an interesting alternative in biomedical applications.     

Household waste generation,composition and determining factors in rapidly urbanizing developing cities: case study of Santa Cruz de la Sierra,Bolivia

Journal of Material Cycles and Waste Management - Detailed information about waste generation rates, composition, and their influencing factors, is essential for sustainable municipal solid waste...     

Evaluation of cleaning and disinfection protocols for commercial farm equipment following a foreign animal disease outbreak

This study evaluated the microbiocidal efficacy of a cleaning and disinfection (C&D) treatment using stainless-steel coupons applied to three common types of animal mortality transport vehicles when exposed to agricultural conditions. Metal test coupons, inoculated with bacteriophage MS2, were affixed to the undercarriage of three types of animal mortality transport vehicles at various locations. Coupons were grimed by maneuvering the test vehicles down a series of wet dirt roads. Coupons were attached and extracted at various points to evaluate C&D performance with and without grime. C&D efficacy using a water-supplied pressure washing system and a dilute sodium hypochlorite (NaOCl) solution was determined by comparing the difference in recovered viable virus between positive control coupons and test coupons. The results demonstrated a relatively high surface decontamination efficacy, with all but one location showing >5 log reduction of MS2. Coupons located on the roll-off truck's inside-back bumper contained the highest level of grime and resulted in a 4 log reduction of MS2. There was no significant difference in C&D efficacy across vehicle types, but locations impacted by grime and lack of accessibility achieved lower efficacies on average. These findings suggest that common C&D protocols, when applied to farm mortality transport vehicles, are effective. Hard-to-access locations containing high levels of grime may be candidates for additional targeted treatment.     

Low‐concentration hydrogen peroxide decontamination for Bacillus spore contamination in buildings

Remediation and recovery efforts after a release of Bacillus anthracis (anthrax) spores may be difficult and costly. In addition, response and recovery technologies may be focused on critical resources, leaving the small business or homeowner without remediation options. This study evaluates the efficacy of relatively low levels of hydrogen peroxide vapor (HPV) delivered from off‐the‐shelf equipment for the inactivation of Bacillus spores within an indoor environment. Decontamination evaluations were conducted in a house using both Bacillus atrophaeus var. globigii (Bg; as surrogates for B. anthracis) inoculated on the carpet and galvanized metal as coupons and Geobacillus stearothermophilus (Gs) as biological indicators on steel. The total decontamination time ranged from 4 to 7 days. Using the longer exposure times, low concentrations of HPV (average levels below 20 parts per million) effectively inactivated Bg and Gs spores on the materials tested. The HPV was generated with commercial humidifiers and household‐strength hydrogen peroxide solutions. The presence of home furnishings did not have a significant impact on HPV efficacy. This simple, inexpensive, and effective decontamination method could have significant utility for remediation following a B. anthracis spore release, such as following a terrorist attack.     

Frequency and timing of extrapair fertilisation in the polyandrous red phalarope (Phalaropus fulicarius)

In sequentially polyandrous bird species, where females mate with different males in succession during a single breeding season, sperm stored by females can occasionally lead to extrapair fertilisations (EPFs) in clutches cared for by the second and subsequent males. Thus, we predicted that in red phalaropes (Phalaropus fulicarius) – a sex-role-reversed, sequentially polyandrous, arctic breeding shorebird – EPFs would occur more frequently in clutches laid later in the breeding season. We used multilocus DNA profiling to examine the frequency and timing of EPFs in a population of red phalaropes breeding in the Canadian high arctic. Using a technique to determine parentage without maternal DNA, we inferred that 6 of 70 chicks in 18 broods resulted from EPFs – one extrapair chick in each of 6 broods. These results were supported by a further analysis using microsatellite DNA. As predicted, broods containing EPFs hatched from clutches laid significantly later in the season than did broods containing no EPFs. The difference in median hatch dates between broods with and without EPFs was 9.0 days, or 38% of the entire egg-laying period in that season. For the whole breeding season, we estimated that 6.5% of chicks were sired by extrapair males, which is similar to extrapair paternity estimates for other sex-role-reversed birds, but relatively low compared to the majority of socially monogamous species studied so far. Received: 24 August 1998 / Received in revised form: 18 January 1999 / Accepted: 24 January 1999     

Electronic scraps--recovering of valuable materials from parallel wire cables

Every year, the number of discarded electro-electronic products is increasing. For this reason recycling is needed, to avoid wasting non-renewable natural resources. The objective of this work is to study the recycling of materials from parallel wire cable through unit operations of mineral processing. Parallel wire cables are basically composed of polymer and copper. The following unit operations were tested: grinding, size classification, dense medium separation, electrostatic separation, scrubbing, panning, and elutriation. It was observed that the operations used obtained copper and PVC concentrates with a low degree of cross contamination. It was concluded that total liberation of the materials was accomplished after grinding to less than 3 mm, using a cage mill. Separation using panning and elutriation presented the best results in terms of recovery and cross contamination.     

Reducing the Effects of Dredged Material Levees on Coastal Marsh Function: Sediment Deposition and Nekton Utilization

Dredged material levees in coastal Louisiana are normally associated with pipeline canals or, more frequently, canals dredged through the wetlands to allow access to drilling locations for mineral extraction. The hydrologic impact on marshes behind the levee is of concern to coastal resource managers because of the potential impact on sediment transport and deposition, and the effect on estuarine organism access to valuable nursery habitat. This study examined the effects of gaps in dredged material levees, compared to continuous levees and natural channel banks, on these two aspects of marsh function. Field studies for sediment deposition were conducted biweekly for a year, and nekton samples were collected in spring and fall. Variation in nekton density among study arears and landscape types was great in part because of the inherent sampling gear issues and in part because of differences in characteristics among areas. Nekton densities were generally greater in natural compared to leveed and gapped landscapes. Differences in landscape type did not explain patterns in sediment deposition. The gaps examined appear to be too restrictive of marsh flooding to provide efficient movements of floodwaters onto the marsh during moderate flooding events. The “trapping” effect of the levees increases sediment deposition during extreme events. Gapping material levees may be an effective method of partially restoring upper marsh connection to nekton, but this method may work best in lower elevation marshes where nekton use is greater.     

The role of wax and resin in the nestmate recognition system of a stingless bee, Tetragonisca angustula

Recent research has shown that entrance guards of the stingless bee Tetragonisca angustula make less errors in distinguishing nestmates from non-nestmates than all other bee species studied to date, but how they achieve this is unknown. We performed four experiments to investigate nestmate recognition by entrance guards in T. angustula. We first investigated the effect of colony odours on acceptance. Nestmates that acquired odour from non-nestmate workers were 63% more likely to be rejected while the acceptance rate of non-nestmates treated with nestmate odour increased by only 7%. We further hypothesised that guards standing on the wax entrance tube might use the tube as an odour referent. However, our findings showed that there was no difference in the acceptance of non-nestmates by guards standing on their own colony’s entrance tube versus the non-nestmate’s entrance tube. Moreover, treatment of bees with nestmate and non-nestmate resin or wax had a negative effect on acceptance rates of up to 65%, regardless of the origin of the wax or resin. The role of resin as a source of recognition cues was further investigated by unidirectionally transferring resin stores between colonies. Acceptance rates of nestmates declined by 37% for hives that donated resin, contrasting with resin donor hives where acceptance of non-nestmates increased by 21%. Overall, our results confirm the accuracy of nestmate recognition in T. angustula and reject the hypothesis that this high level of accuracy is due to the use of the wax entrance tubes as a referent for colony odour. Our findings also suggest that odours directly acquired from resin serve no primary function as nestmate recognition cues. The lack of consistency among colonies plus the complex results of the third and fourth experiments highlight the need for further research on the role of nest materials and cuticular profiles in understanding nestmate recognition in T. angustula.