The search for an alternative to piped water and sewer systems in the Alaskan Arctic

Forty-two communities in rural Alaska are considered unserved or underserved with water and sewer infrastructure. Many challenges exist to provide centralized piped water and sewer infrastructure to the homes, and they are exacerbated by decreasing capital funding. Unserved communities in rural Alaska experience higher rates of disease, supporting the recommendation that sanitation infrastructure should be provided. Organizations are pursuing alternative solutions to conventional piped water and sewer in order to maximize water use and reuse for public health. This paper reviews initiatives led by the State of Alaska, the Alaska Native Tribal Health Consortium, and the Yukon Kuskokwim Health Corporation to identify and develop potential long-term solutions appropriate and acceptable to rural communities. Future developments will likely evolve based on the lessons learned from the initiatives. Recommendations include Alaska-specific research needs, increased end-user participation in the design process, and integrated monitoring, evaluation, and information dissemination in future efforts.     

Dimer formation during UV photolysis of diclofenac

Dimer formation was observed during ultraviolet (UV) photolysis of the anti-inflammatory drug diclofenac, and confirmed with mass spectrometry, NMR and fluorescence analysis. The dimers were combinations of the two parent molecules or of the parent and the product of photolysis, and had visible color. Radical formation during UV exposure and dissolved oxygen photosensitized reactions played a role in dimer formation. Singlet oxygen formed via photosensitization by photolysis products of diclofenac. It reacted with diclofenac to form an epoxide which is an intermediate in some dimer formation pathways. Quantum yield of photolysis for diclofenac was 0.21 ± 0.02 and 0.19 ± 0.02 for UV irradiation from medium pressure and low pressure mercury vapor lamps, respectively. Band pass filter experiments revealed that the quantum yield is constant at wavelengths >200 nm. The same dimers formed in laboratory grade water when either of the two UV sources was used. Dimers did not form in wastewater effluent matrix, and diclofenac epoxide molecules may have formed bonds with organic matter rather than each other Implications for the importance of dimer formation in NOM are discussed.     

Applicability of energy-positive net-zero water management in Alaska: technology status and case study

Challenges of water and wastewater management in Alaska include the potential need for above-grade and freeze-protected piping, high unit energy costs and, in many rural areas, low population density and median annual income. However, recently developed net-zero water (NZW), i.e., nearly closed-loop, direct potable water reuse systems, can retain the thermal energy in municipal wastewater, producing warm treated potable water without the need for substantial water re-heating, heat pumping or transfer, or additional energy conversion. Consequently, these systems are projected to be capable of saving more energy than they use in water treatment and conveyance, in the temperate USA. In this paper, NZW technology is reviewed in terms of potential applicability in Alaska by performing a hypothetical case study for the city of Fairbanks, Alaska. Results of this paper study indicate that in municipalities of Alaska with local engineering and road access, the use of NZW systems may provide an energy-efficient water service option. In particular, case study modeling suggests hot water energy savings are equivalent to five times the energy used for treatment, much greater savings than in mid-latitudes, due largely to the substantially higher energy needed for heating water from a conventional treatment system and lack of need for freeze-protected piping. Further study of the applicability of NZW technology in cold regions, with expanded evaluation in terms of system-wide lifecycle cost, is recommended.     

Ammonia emissions from Swine waste lagoons in the Utah great basin

In animal production systems (poultry, beef, and swine), current production, storage, and disposal techniques present a challenge to manage wastes to minimize the emissions of trace gases within relatively small geographical areas. Physical and chemical parameters were measured on primary and secondary lagoons on three different swine farming systems, three replicates each, in the Central Great Basin of the United States to determine ammonia (NH3) emissions. Nutrient concentrations, lagoon water temperature, and micrometeorological data from these measurements were used with a published process model to calculate emissions. Annual cycling of emissions was determined in relation to climatic factors and wind speed was found the predominating factor when the lagoon temperatures were above about 3 degrees C. Total NH3 emissions increased in the order of smallest to largest: nursery, sow, and finisher farms. However, emissions on an animal basis increased from nursery animals being lowest to sow animals being highest. When emissions were compared to the amount of nitrogen (N) fed to the animals, NH3 emissions from sows were lowest with emissions from finisher animals highest. Ammonia emissions were compared to similar farm production systems in the humid East of the United States and found to be similar for finisher animals but had much lower emissions than comparable humid East sow production. Published estimates of NH3 emissions from lagoons ranged from 36 to 70% of feed input (no error range) compared to our emissions determined from a process model of 9.8% with an estimated range of +/-4%.     

An experimental technique to detect tool–workpiece contact in micromilling

There is a need for simple, accurate, and low-cost techniques to detect tool–workpiece contact (or tool touch-off) in micromilling operations. This paper presents a method that is based on monitoring changes in the power spectral characteristics of the spindle vibration signal. The accuracy of this contact detection method is evaluated under different conditions by measuring the overshoot of the tool into the workpiece surface. Specifically, the effects of tool geometry, workpiece surface roughness and hardness, tool wear, step size, and contact detection threshold on the overshoot are analyzed through experiments carried out on a 3-axis micromilling machine. The results show that the method is capable of sub-micron contact detection accuracy depending on the workpiece hardness, roughness, and contact detection threshold.