Acid generation upon thermal concentration of natural water: The critical water content and the effects of ionic composition

Thermal evaporation of a variety of simulated pore waters from the region of Yucca Mountain, Nevada, produced acidic liquids and gases during the final stages of evaporation. Several simulated pore waters were prepared and then thermally distilled in order to collect and analyze fractions of the evolved vapor. In some cases, distillates collected towards the end of the distillation were highly acidic; in other cases the pH of the distillate remained comparatively unchanged during the course of the distillation. The results suggest that the pH values of the later fractions are determined by the initial composition of the water. Acid production stems from the hydrolysis of magnesium ions, especially at near dryness. Near the end of the distillation, magnesium nitrate and magnesium chloride begin to lose water of hydration, greatly accelerating their thermal decomposition to form acid. Acid formation is promoted further when precipitated calcium carbonate is removed. Specifically, calcium chloride-rich pore waters containing moderate (10–20 ppm) levels of magnesium and nitrate and low levels of bicarbonate produced mixtures of nitric and hydrochloric acid, resulting in a precipitous drop in pH to values of 1 or lower after about 95% of the original volume was distilled. Waters with either low or moderate magnesium content coupled with high levels of bicarbonate produced slightly basic fractions (pH 7–9). If calcium was present in excess of bicarbonate, waters containing moderate levels of magnesium produced acid even in the presence of bicarbonate, due to the precipitation of calcium carbonate. Other salts such as halite and anhydrite promote the segregation of acidic vapors from residual basic solids. The concomitant release of wet acid gas has implications for the integrity of the alloys under consideration for containers at the Yucca Mountain nuclear waste repository. Condensed acid gases at very low pH, especially mixtures of nitric and hydrochloric acid, are capable of corroding even alloys, such as nickel-based Alloy 22, which are considered to be corrosion-resistant under milder conditions.     

Assisting Australian indigenous resource management and sustainable utilization of species through the use of GIS and environmental modeling techniques

Information on distribution and relative abundance of species is integral to sustainable management, especially if they are to be harvested for subsistence or commerce. In northern Australia, natural landscapes are vast, centers of population few, access is difficult, and Aboriginal resource centers and communities have limited funds and infrastructure. Consequently defining distribution and relative abundance by comprehensive ground survey is difficult and expensive. This highlights the need for simple, cheap, automated methodologies to predict the distribution of species in use, or having potential for use, in commercial enterprise. The technique applied here uses a Geographic Information System (GIS) to make predictions of probability of occurrence using an inductive modeling technique based on Bayes' theorem. The study area is in the Maningrida region, central Arnhem Land, in the Northern Territory, Australia. The species examined, Cycas arnhemica and Brachychiton diversifolius, are currently being 'wild harvested' in commercial trials, involving sale of decorative plants and use as carving wood, respectively. This study involved limited and relatively simple ground surveys requiring approximately 7 days of effort for each species. The overall model performance was evaluated using Cohen's kappa statistics. The predictive ability of the model for C. arnhemica was classified as moderate and for B. diversifolius as fair. The difference in model performance can be attributed to the pattern of distribution of these species. C. arnhemica tends to occur in a clumped distribution due to relatively short distance dispersal of its large seeds and vegetative growth from long-lived rhizomes, while B. diversifolius seeds are smaller and more widely dispersed across the landscape. The output from analysis predicts trends in species distribution that are consistent with independent on-site sampling for each species and therefore should prove useful in gauging the extent of resource availability. However, some caution needs to be applied as the models tend to over predict presence which is a function of distribution patterns and of other variables operating in the landscape such as fire histories which were not included in the model due to limited availability of data.     

Modeling kelp forest distribution and biomass along temperate rocky coastlines

We address the global deficit of data describing kelp forest distribution, relative covers and biomass by testing the ability of species distribution models to predict these attributes at locations where data are currently limited. We integrated biological ground truth data with high-resolution environmental datasets to develop generalized additive models that accurately predict the structure of Laminaria forests within the Bay of Morlaix (48°42′42″N, 3°55′40″W). Forest distribution and proportional covers were predicted using water depth, light availability, wave exposure and sediment dynamics. The biomass of individual kelp species was modeled by supplementing these same variables with measures of seafloor slope and benthic position. Biomass predictions for Laminaria digitata and Laminaria hyperborea contrast the physiological tolerances of these species to light and wave exposure gradients. As a direct management output, we produced high-resolution maps (25 m² grids) that closely match independent field data and provide vital information for marine spatial planning.     

Degradation rates of CFC-11, CFC-12 and CFC-113 in anoxic shallow aquifers of Araihazar, Bangladesh

Chlorofluorocarbons CFC-11 (CCl(3)F), CFC-12 (CCl(2)F(2)), and CFC-113 (CCl(2)F-CClF(2)) are used in hydrology as transient tracers under the assumption of conservative behavior in the unsaturated and saturated soil zones. However, laboratory and field studies have shown that these compounds are not stable under anaerobic conditions. To determine the degradation rates of CFCs in a tropical environment, atmospheric air, unsaturated zone soil gas, and anoxic groundwater samples were collected in Araihazar upazila, Bangladesh. Observed CFC concentrations in both soil gas and groundwater were significantly below those expected from atmospheric levels. The CFC deficits in the unsaturated zone can be explained by gas exchange with groundwater undersaturated in CFCs. The CFC deficits observed in (3)H/(3)He dated groundwater were used to estimate degradation rates in the saturated zone. The results show that CFCs are degraded to the point where practically no (<5%) CFC-11, CFC-12, or CFC-113 remains in groundwater with (3)H/(3)He ages above 10 yr. In groundwater sampled at our site CFC-11 and CFC-12 appear to degrade at similar rates with estimated degradation rates ranging from approximately 0.25 yr(-1) to approximately 6 yr(-1). Degradation rates increased as a function of reducing conditions. This indicates that CFC dating of groundwater in regions of humid tropical climate has to be carried out with great caution.     

Relationship of Destruction Parameters to the Destruction/Removal Efficiency of PCBs

The destruction/removal efficiency (DRE), and the ability to accurately measure it, is a function of the concentration of the chemical compound in the input waste, the incinerator design and operation, sampling methods, and the analytical procedures. All of these are interrelated. This paper discusses the basic DRE equation [DRE = W_In W_out)/W_in × 100] and how it relates to some of the other destruction parameters. Some example data from the literature are presented. While PCBs have been used as the example, the equations and graphs are equally valid for some other hazardous compounds (POHCs), with the substitution of the 99.99% DRE requirement in lieu of the 99.9999% DRE for PCBs. The use of the relationships discussed in this paper should allow incinerator operators to more efficiently plan demonstration test burns which will adequately demonstrate the DRE.     

EFFECTIVENESS OF DUPONT TYPAR SHEETING IN CONTROLLING MACROPHYTE REGROWTH AFTER OVERWINTER DRAWDOWN1

ABSTRACT: A new polypropylene sheeting compound, DuPont Typar 3201 and 3301, was applied to the sediments of Country Lake (Portage Co., Ohio) in March 1978 after an overwinter drawdown, and regrowth of rooted macrophytes was compared to an adjacent control area in summer 1978. Regrowth was slight, and macrophyte biomass was at least 100X less than in controls. The sheeting material was permeable to gases and did not “balloon.” This material is recommended for use around docks, swimming areas, and boat mooring sites. Cost in 1978 was about $0.24/m².     

THE ECONOMIC FEASIBILITY OF DUAL PURPOSE NUCLEAR DESALINATION OF GROUND WATER1

ABSTRACT: The economic feasibility of a large scale dual purpose (desalting water and power production) facility were evaluated. Although a site in the Tularosa basin of southern New Mexico was chosen as a case study for this analysis, it is believed that the approach and consequential results would be applicable to alternative sites in the Southwest. The basic project evaluated included: a) a ground water well field; b) a dual purpose, nuclear, desalination plant; c) a mineral recovery plant; and d) a reservoir for recreation and irrigation storage. Principle project outputs included electrical power, minerals, recreation, and water for either irrigated agricultural production or export to an adjoining river basin. Two alternative project designs were developed for detailed analysis. The first alternative encompassed all major project components. The results, in discounted net values used to assess the feasibility of the project, were essentially negative; that is, values were less than zero for full scale development. The net benefits ranged from $-986.57 million at a 5 percent discount rate, to $-1,137.528 million at a discount rate of 10 percent. In the second alternative, exportation of the desalted water from the Tularosa basin to two adjacent rivers was analyzed with somewhat better net benefits, ranging from $-382,527 million to $-478,612 million at the 5 and 10 percent discount rates.     

Monitoring the Environment: Taking a Historical Perspective

This paper introduces the five papers that follow, all of which were originally presented at a workshop titled Monitoring the Environment: Scales, Methods, and Systems in Historical Perspective. The workshop, sponsored by the Society for the History of Technology and the American Society for Environmental History, examined past efforts to develop tools, methods, and systems for measuring or monitoring some aspect of the physical environment. Four of the papers included here focus on various aspects of air quality monitoring; the fifth has to do with monitoring the earth from space. Despite differences in time period and approach, each article examines how specific tools and methods – and the motivations for developing those tools and methods – evolved. Among other things, these papers make clear that systems for monitoring various aspects of the physical environment are shaped by a variety of stakeholders and suggest that efforts to construct such systems should not be viewed as a purely technical task.     

Simulation of Potential Oyster Density with Variable Freshwater Inflow (1965–2000) to the Caloosahatchee River Estuary, Southwest Florida, USA

Oyster beds are disappearing worldwide through a combination of over-harvesting, diseases, and salinity alterations in the coastal zone. Sensitivity of oysters to variable discharge and salinity is particularly acute in small sub-tropical estuaries subject to regulated freshwater releases. South Florida has sub-tropical estuaries where watershed flood control sometimes results in excessive freshwater inflow to estuaries during the wet season (May–Oct) and reduced discharge and increased salinities in the dry season (Nov–Apr). The potential to reserve freshwater accumulated during the wet season could offer the capacity to regulate freshwater at different temporal scales, thus optimizing salinity conditions for estuarine biota. The goal of this study was to use simulation modeling to explore the effects of freshwater inflows and salinity on adult oyster survival in the Caloosahatchee River Estuary (CRE) in southwest Florida. Water managers derived three different freshwater inflow scenarios for the CRE based on historical and modified watershed attributes for the time period of 1965–2000. Three different salinity time series were generated from the inflow scenarios at each of three sites in the lower CRE and used to conduct nine different oyster simulations. Overall, the predicted densities of adult oysters in the upstream site were 3–4 times greater in seasons that experienced reduced freshwater inflow (e.g., increased salinity) with oyster density in the lower estuary much less influenced by the inflows. Potential storage of freshwater reduced the frequency of extreme flows in the wet season and helped to maintain minimum inflow in the dry season near the estuarine mouth. Analyses of inflows indicated that discharges ranging from 0 to 1,500 cfs could promote favorable salinities of 10–25 in the lower CRE depending on wet versus dry season climatic conditions. This range of inflows is similar to that derived in other studies of the CRE and emphasizes the value of simulation models to help prescribe freshwater releases which benefit estuarine biota.