A review of vulnerability indicators for deltaic social–ecological systems

The sustainability of deltas worldwide is under threat due to the consequences of global environmental change (including climate change) and human interventions in deltaic landscapes. Understanding these systems is becoming increasingly important to assess threats to and opportunities for long-term sustainable development. Here, we propose a simplified, yet inclusive social–ecological system (SES)-centered risk and vulnerability framework and a list of indicators proven to be useful in past delta assessments. In total, 236 indicators were identified through a structured review of peer-reviewed literature performed for three globally relevant deltas—the Mekong, the Ganges–Brahmaputra–Meghna and the Amazon. These are meant to serve as a preliminary “library” of potential indicators to be used for future vulnerability assessments. Based on the reviewed studies, we identified disparities in the availability of indicators to populate some of the vulnerability domains of the proposed framework, as comprehensive social–ecological assessments were seldom implemented in the past. Even in assessments explicitly aiming to capture both the social and the ecological system, there were many more indicators for social susceptibility and coping/adaptive capacities as compared to those relevant for characterizing ecosystem susceptibility or robustness. Moreover, there is a lack of multi-hazard approaches accounting for the specific vulnerability profile of sub-delta areas. We advocate for more comprehensive, truly social–ecological assessments which respond to multi-hazard settings and recognize within-delta differences in vulnerability and risk. Such assessments could make use of the proposed framework and list of indicators as a starting point and amend it with new indicators that would allow capturing the complexity as well as the multi-hazard exposure in a typical delta SES.     

Studies of potential sources that contributed to atmospheric mercury in Toronto,Canada

This study identified sources of mercury (Hg) in downtown Toronto, Canada by analyzing gaseous elemental mercury (GEM), mercury associated with particles with sizes less than 2.5 microns (PHg < 2.5), and gaseous oxidized inorganic mercury (GOIM), commonly referred to as reactive gaseous mercury (RGM), and air pollutants (CO, NO_x, O₃, PM_2.5, SO₂) concentrations between Dec 2003 and Nov 2004. The data were analyzed using Positive Matrix Factorization (PMF) model, Principal Components Analysis (PCA), ratio analysis, back trajectories, and correlation analyses. The analyses suggest industrial sources (chemical production, metal production, sewage treatment), rather than coal combustion, were the major contributors to measured Hg levels. Overlap in source profiles for the Hg sources listed in the Canadian National Pollutant Release Inventory (NPRI) and lack of source profiles for urban sources were the major limitations to positively identifying sources from the PMF and PCA factors. Correlation analyses revealed direct emissions were the sources of GOIM in spring, summer, and fall, and the occurrence of GEM oxidation by ozone in the summer. Elevated Hg events are attributed to emissions from urban sources near the sampling site, regional point sources, and photochemical processes involving ozone.     

Volunteer Macroinvertebrate Monitoring: Tensions Among Group Goals,Data Quality,and Outcomes

Volunteer monitoring of natural resources is promoted for its ability to increase public awareness, to provide valuable knowledge, and to encourage policy change that promotes ecosystem health. We used the case of volunteer macroinvertebrate monitoring (VMM) in streams to investigate whether the quality of data collected is correlated with data use and organizers' perception of whether they have achieved these outcomes. We examined the relation between site and group characteristics, data quality, data use, and perceived outcomes (education, social capital, and policy change). We found that group size and the degree to which citizen groups perform tasks on their own (rather than aided by professionals) positively correlated with the quality of data collected. Group size and number of years monitoring positively influenced whether a group used their data. While one might expect that groups committed to collecting good-quality data would be more likely to use it, there was no relation between data quality and data use, and no relation between data quality and perceived outcomes. More data use was, however, correlated with a group's feeling of connection to a network of engaged citizens and professionals. While VMM may hold promise for bringing citizens and scientists together to work on joint conservation agendas, our data illustrate that data quality does not correlate with a volunteer group's desire to use their data to promote regulatory change. Therefore, we encourage scientists and citizens alike to recognize this potential disconnect and strive to be explicit about the role of data in conservation efforts.     

Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a review of evidence about the link between EMS and environmental performance in business organisations, finding that, despite much research, there is still little quantitative evidence. The second part of the paper uses three independent statistical methods (simple correlations, Jaggi-Freedman indices and a ‘trend differences’ approach) to assess whether companies and production sites with EMS perform better than those without and whether performance improves after an EMS has been introduced. The paper shows that there is currently no evidence that EMS have a consistent and significant positive impact on environmental performance. Policy action based on the simple assumption that companies with an EMS perform better than those without therefore seems inappropriate.     

Chloride leaching from air pollution control residues solidified using ground granulated blast furnace slag

Ground granulated blast furnace slag (ggbs) has been used to solidify air pollution control (APC) residues obtained from a major UK energy-from-waste plant. Samples were prepared with ggbs additions between 10 and 50 wt% of total dry mass and water/solids ratios between 0.35 and 0.80. Consistence, setting time, compressive strength and leaching characteristics have been investigated. Results indicated that the highly alkaline nature of APC residues due to the presence of free lime can be used to activate ggbs hydration reactions. Increasing ggbs additions and reducing the water content resulted in increased compressive strengths, with 50 wt% ggbs samples having average 28 d strengths of 20.6 MPa. Leaching tests indicate low physical encapsulation and minimal chemical fixation of chloride in ggbs solidified APC residues. The results suggest that more than 50 wt% ggbs additions would be required to treat APC residues to meet the current waste acceptance criteria limits for chloride.     

Discretionary Judgement in Local Planning Authority Decision Making: Screening Development Proposals for Environmental Impact Assessment

Screening is a critical decision-stage in the Environmental Impact Assessment (EIA) process and involves the determination of whether or not a development proposal will require EIA. This decision requires a discretionary judgement on whether the development has the potential to cause ‘significant environmental effects’, and consequently there is potential for diversity to exist in formal requests for EIA. Drawing upon a comprehensive survey of Local Planning Authorities (LPAs) in England and Wales, this paper explores the characteristics of LPA screening decision making since the introduction of revised EIA regulations in March 1999. The paper starts with a theoretical overview of rationality, decision making and planning theory, followed by a brief review of the regulatory context of EIA screening. The research approach is then outlined and the survey findings are presented, including a detailed consideration of organizational and individual level analyses set within the context of planning theory judgement debates. Comparisons with other European countries are briefly made, before drawing conclusions and recommendations.     

MEASURED AND PREDICTED VELOCITY AND LONGITUDINAL DISPERSION AT STEAI)Y AND UNSTEADY FLOW,COLORADO RIVER,GLEN CANYON DAM TO LAKE MEAD1

ABSTRACT: The effect of unsteadiness of dam releases on velocity and longitudinal dispersion of flow was evaluated by injecting a fluorescent dye into the Colorado River below Glen Canyon Dam and sampling for dye concentration at selected sites downstream. Measurements of a 26-kilometer reach of Glen Canyon, just below Glen Canyon Dam, were made at nearly steady dam releases of 139, 425, and 651 cubic meters per second. Measurements of a 380-kilometer reach of Grand Canyon were made at steady releases of 425 cubic meters per second and at unsteady releases with a daily mean of about 425 cubic meters per second. In Glen Canyon, average flow velocity through the study reach increased directly with discharge, but dispersion was greatest at the lowest of the three flows measured. In Grand Canyon, average flow velocity varied slightly from subreach to subreach at both steady and unsteady flow but was not significantly different at steady and unsteady flow over the entire study reach. Also, longitudinal dispersion was not significantly different during steady and unsteady flow. Long tails on the time-concentration curves at a site, characteristic of most rivers but not predicted by the one-dimensional theory, were not found in this study. Absence of tails on the curves shows that, at the measured flows, the eddies that are characteristic of the Grand Canyon reach do not trap water for a significant length of time. Data from the measurements were used to calibrate a one-dimensional flow model and a solute-transport model. The combined set of calibrated flow and solute-transport models was then used to predict velocity and dispersion at potential dam-release patterns.     

Stable carbon isotope ratio and composition of microbial fatty acids in tropical soils

The soil microbial community plays a critical part in tropical ecosystem functioning through its role in the soil organic matter (SOM) cycle. This study evaluates the relative effects of soil type and land use on (i) soil microbial community structure and (ii) the contribution of SOM derived from the original forest vegetation to the functioning of pasture and sugarcane (Saccharum spp.) ecosystems. We used principal components analysis (PCA) of soil phospholipid fatty acid (PLFA) profiles to evaluate microbial community structure and PLFA stable carbon isotope ratios (delta13C) as indicators of the delta13C of microbial substrates. Soil type mainly determined the relative proportions of gram positive versus gram negative bacteria whereas land use primarily determined the relative proportion of fungi, protozoa, and actinomycetes versus other types of microorganisms. Comparison of a simple model to our PLFA delta13C data from land use chronosequences indicates that forest-derived SOM is actively cycled for appreciably longer times in sugarcane ecosystems developed on Andisols (mean turnover time = 50 yr) than in sugarcane ecosystems developed on an Oxisol (mean turnover time = 13 yr). Our analyses indicate that soil chronosequence PLFA delta13C measurements can be useful indicators of the contribution that SOM derived from the original vegetation makes to continued ecosystem function under the new land use.