Siting a municipal solid waste disposal facility,Part II: The effects of external criteria on the final decision

The procedure of a multi-criteria decision analysis supported by the geographic information systems was applied to the site selection process of a planning municipal solid waste management practice based on twelve different scenarios. The scenarios included two different decision tree modes and two different weighting models for three different area requirements. The suitability rankings of the suitable sites obtained from the application of the decision procedure for the scenarios were assessed by a factorial experimental design concerning the effect of some external criteria on the final decision of the site selection process. The external criteria used in the factorial experimental design were defined as “Risk perception and approval of stakeholders” and “Visibility”. The effects of the presence of these criteria in the decision trees were evaluated in detail. For a quantitative expression of the differentiations observed in the suitability rankings, the ranking data were subjected to ANOVA test after a normalization process. Then the results of these tests were evaluated by Tukey test to measure the effects of external criteria on the final decision. The results of Tukey tests indicated that the involvement of the external criteria into the decision trees produced statistically meaningful differentiations in the suitability rankings. Since the external criteria could cause considerable external costs during the operation of the disposal facilities, the presence of these criteria in the decision tree in addition to the other criteria related to environmental and legislative requisites could prevent subsequent external costs in the first place.

Implications:

An experimental design was applied to a siting process based on different scenarios. The suitability rankings of suitable sites were obtained for each scenario. The external criteria used in the design were defined as perception and visibility. The presence of the external criteria produced meaningful differentiations. Two widespread persuasions about site selection were disproved using the results.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

A criticism of applications with multi-criteria decision analysis that are used for the site selection for the disposal of municipal solid wastes

The main aim of this study is to criticize the process of selecting the most appropriate site for the disposal of municipal solid wastes which is one of the problematic issues of waste management operations. These kinds of problems are pathological symptoms of existing problematical human–nature relationship which is related to the syndrome called ecological crisis. In this regard, solving the site selection problem, which is just a small part of a larger entity, for the good of ecological rationality and social justice is only possible by founding a new and extensive type of human–nature relationship. In this study, as a problematic point regarding the discussions on ecological problems, the existing structure of the applications using multi-criteria decision analysis in the process of site selection with three main criteria is criticized. Based on this critique, fundamental problematic points (to which applications are insufficient to find solutions) will be defined. Later, some modifications will be suggested in order to provide solutions to these problematical points. Finally, the criticism addressed to the structure of the method with three main criteria and the feasibility of the new method with four main criteria is subjected to an evaluation process. As a result, it is emphasized that the new structure with four main criteria may be effective in solution of the fundamental problematic points.     

Comparison of chemical composition of the essential oil of Laurus nobilis L. leaves and fruits from different regions of Hatay, Turkey

The essential oils of the leaves and fruits from bay (Laurus nobilis L.) grown in Antakya, Yayladagi and Samandagi were isolated by solvent extraction and analysed by capillary gas chromatography (GC), gas chromatography and mass spectrometry (GC/MS). In Antakya, Yayladagi and Samandagi the chemical compositions of the fruits and leaves were similar according to qualitative and quantitative analysis. Although in both fruits and leaves the major component was found to be 1.8-Cineole a concentration of about 50% compared with essential oils. The composition of the essential oil from the leaves has high content of 1.8-Cineole, Sabinene and alpha-Terpinyl acetate, but a low content of a-Pinene, alpha-Phellandrene and trans-/beta-osimen. 1.8-Cineole was found major component of the leaves essential oil collected from Samandagi (59.94%) which is sea coast of region. Interestingly alpha-Pinene, beta-Pinene, alpha-Phellandrene, 1.8-Cineole and trans-beta-osimen were found the major components of fruits of Laurus nobilis L. harvested from Antakya, Yayladagi and Samandagi Trans-beta-osimen was detected as the major component of fruits essential oil collected again from Samandagi (28.35%)     

A Profile and Management of the US Army's underground storage tanks

The US Army owns more than 10,000 underground storage tanks (USTs), many of which are old and may be leaking. The Resource Conservation and Recovery Act of 1976 required tank owners to collect and report data on them by May 1986. In order to manage the large amounts of information on its USTs, the Army developed a microcomputer-based data base system. The data base system is user friendly and allows the user to store, organize, and manipulate the UST data. A leak potential index (LPI) was also developed and calculated for each of the Army's USTs. The LPI is used to prioritize USTs so that those with higher LPIs can be monitored closely. A characteristic profile of Army USTs according to construction material, capacity, age, content, and LPI is presented in this paper.The opinions expressed in this paper are those of the authors and do not necessarily reflect the views of the US Department of the Army, nor does the mention of trade names or commercial products constitute endorsement or recommendation for use.     

The effects of external costs on the system selection for treatment and disposal of municipal solid wastes: a deterministic case study for a pre-assessment

Journal of Material Cycles and Waste Management - Selecting a system for treatment and disposal of municipal solid wastes (i.e., selection of the capacity, location and type of the processes and...     

Utilization of gold tailings as an additive in Portland cement.

Mine tailings are formed as an industrial waste during coal and ore mining and processing. In the investigated process, following the extraction of gold from the ore, the remaining tailings are subjected to a two-stage chemical treatment in order to destroy the free cyanide and to stabilize and coagulate heavy metals prior to discharge into the tailings pond. The aim of this study was the investigation of the feasibility of utilization of the tailings as an additive material in Portland cement production. For this purpose, the effects of the tailings on the compressive strength properties of the ordinary Portland cement were investigated. Chemical and physical properties, mineralogical composition, particle size distribution and microstructure of the tailings were determined by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (Mastersizer) and scanning electron microscope (SEM). Following the characterization of the tailings, cement mortars were prepared by intergrinding Portland cement with dried tailings. Composition of the cement clinkers were adjusted to contain 5, 15, 25% (wt/wt) dried tailings and also silica fume and fly ash samples (C and F type) were added to clinker in different ratios. The mortars produced with different amounts of tailings, silica fume, fly ashes and also mixtures of them were tested for compressive strength values after 2, 7, 28 and 56 days according to the European Standard (EN 196-1). The results indicated that gold tailings up to 25% in clinker could be beneficially used as an additive in Portland cement production. It is suggested that the gold tailings used in the cement are blended with silica fume and C-type fly ash to obtain higher compressive strength values.     

Analysing workplace violence towards health care staff in public hospitals using alternative ordered response models: the case of north-eastern Turkey

The main objective of this article is to determine key factors that may have a significant effect on the verbal abuse, emotional abuse and physical assault of health care workers in north-eastern Turkey. A self-administered survey was completed by 450 health care workers in three well-established hospitals in Erzurum, Turkey. Because of the discrete and ordered nature of the dependent variable of the survey, the data were analysed using four distinctive ordered response models. Results revealed that several key variables were found to be a significant determinant of workplace violence, such as the type of health institution, occupational position, weekly working hours, weekly shift hours, number of daily patient contacts, age group of the respondents, experience in the health sector, training against workplace violence and current policies of the hospitals and the Turkish Ministry of Health.     

A new perspective to environmental degradation: the linkages between higher education and CO2 emissions

Although there have been many studies, focusing on basic determinants of carbon dioxide emissions (CO₂), the effect of higher education, which has the potential to be an important determinant of CO₂, has been neglected. The paper aims to display the potential mechanisms between higher education and CO₂ and expand the environmental economics literature. In the paper, the trade-off between higher education and CO₂ is tested by autoregressive distributed lag (ARDL) during the period 1983–2017 in Turkey. Results denote that cointegration exists and an increase in higher education negatively affects CO₂. We also find that economic growth and energy consumption positively affect CO₂ both in the long run and short run. Vector error correction model (VECM) reveals that higher education, economic growth, energy consumption, trade openness, and exchange rates are the causes of CO₂ in the long run. Also, energy consumption and economic growth are the causes of CO₂ in the short run. Therefore, higher education can be used to overcome environmental problems.