Determination of waterscape beauties through visual quality assessment method

Besides being an indispensable life element, water is also in the first rows among the most important landscape elements that have the visual reserve value in both natural and cultural environments. In this study, the aim was to present suggestions about the use of waterscapes in landscape design and planning attempts by determining the water types bearing high visual reserve values among different types of waterscapes bearing high visual reserve values. The visual quality assessment method was used in this study. One hundred and twenty eight university students ranked the six waterscapes in a visual quality survey. The results showed that urban waterscape scenery [visual quality point (VQP) = 6.0391], was the most preferred category, whereas, river scenery (VQP = 3.5547) was the least preferred. The second preferred waterscape was waterfall (in rural landscape) scenery (VQP = 5.8594) and the third was standing water scenery (SWS; VQP = 5.3672). The relationships between landscape parameters and visual quality of landscape indicated that vividness and fascinaty parameters had a significant relation with preference. Some suggestions were made regarding the use of wa terscapes visual value in planning and designing of the landscape.     

Skin prick test reactivity in allergic rhinitis patients to airborne pollens

The aim was to investigate the impact of atmospheric pollen in determining allergic rhinitis. It was conducted with 130 patients with allergic rhinitis in three different sites in Eskisehir, Turkey, in 2000-2001, using a gravimetric method with a Durham sampler. Skin prick test results, the symptoms of patients and their findings all confirmed the presence of allergic reactions to pollen allergens in the patients observed. During the period, a total of 47,082 pollen grains/cm(2) belonging to 45 taxa were recorded. Of the total pollen grains, 81.0% were arboreal and 18% non-arboreal. The majority of the investigated pollen grains were from Pinaceae, Salix spp., Chenopodiaceae/Amaranthaceae, Cupressaceae and Poaceae. Pollen concentrations reached the highest level in May (54.36%). The pollen allergens provoking severe sensitization were grasscereal mixtures (58.5%), followed by arboreals (33.8%). All patients (100.0%) were sensitive to grass. This study emphasizes the significance of determining the types and concentrations of pollen with a view to comparing changes in highly concentrated allergens.     

The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Influences of urban wastewaters on the stream water quality: a case study from Gumushane Province, Turkey

Urban wastewater in Turkey is primarily discharged without treatment to marine environments, streams and rivers, and natural and artificial lakes. Since it has been well established that untreated effluent in multi-use waters can have acute and chronic impacts to both the environment and human health, it is important to evaluate the consequences of organic enrichment relative to the structure and function of aquatic environment. We investigated the impacts of untreated municipal wastewater discharge from the city of Gumushane in the Eastern Black Sea Region of Turkey on the surface water quality of the stream Harsit. Several key water-quality indicators were measured: chemical oxygen demand (COD), ammonium nitrogen (NH ₄ ⁺ –N), nitrite nitrogen (NO ₂ ^? –N), nitrate nitrogen (NO ₃ ^? –N), total Kjeldahl nitrogen (TKN), total nitrogen (TN), orthophosphate phosphorus (PO ₄ ^3? –P), methylene blue active substances (MBAS), water temperature (t), pH, dissolved oxygen (DO), and electrical conductivity (EC). The monitoring and sampling studies were conducted every 15 days from March 2009 to February 2010 at three longitudinally distributed stations. While t, pH, DO, and EC demonstrated relatively little variability over the course of the study, other parameters showed substantial temporal and spatial variations. The most dramatic differences were noted in COD, NH ₄ ⁺ –N, NO ₂ ^? –N, TKN, TN, PO ₄ ^3— P, and MBAS immediately downstream of the wastewater discharge. Concentration increases of 309 and 418 % for COD, 5,635 and 2,162 % for NH ₄ ⁺ –N, 2,225 and 674 % for NO ₂ ^? –N, 283 and 478 % for TKN, 208 and 213 % for PO ₄ ^3? –P, and 535 and 1,260 % for MBAS were observed in the summer and autumn, respectively. These changes were associated with greatly diminished seasonal stream flows. Based on NO ₂ ^? –N, TKN, PO ₄ ^3— P, and MBAS concentrations, it was concluded that Harsit stream water was correctly classified as polluted. The most telling parameter, however, was NH ₄ ⁺ –N, which indicated highly polluted waters in both the summer and autumn. The elevated concentrations of both P and N in the downstream segment of the stream triggered aggressive growth of submerged algae. This eutrophication of river systems is highly representative of many urban corridors and is symptomatic of ongoing organic enrichment that must be addressed through improved water treatment facilities.     

Variation of total organic carbon content along the stream Harsit, Eastern Black Sea Basin, Turkey

The TOC in surface waters and wastewater is an important analytical parameter describing the total content of all organic substances containing carbon. In practice, the TOC originated from natural and anthropogenic sources, and even if it is not directly responsible for dangers on human health, its determination is important for any kind of water that is used by public. The aim of this study was to determine variation of total organic carbon (TOC) and total carbon (TC) content in the stream Harsit, which courses in Eastern Black Sea Region, Turkey. Sampling was fortnightly conducted in each of the four seasons between March 2009 and February 2010. A total of 230 water samples were collected from ten sampling stations along the main branch of the stream Harsit with 143 km of length. Obtained TOC values were evaluated and used to classify the water quality of stream Harsit, according to the Turkish Water Pollution Control Regulation (TWPCR). The annual average TOC content values for the stations were found between 2.33 and 6.97 mg/L. It was seen that the TOC content have increased along the streamcourse of Harsit until the fourth station, where reaches its maximum value. The TOC content, then, has decreased and the minimum value was observed in the eighth station. The results showed that, except in winter season, maximum TOC content observed in many of the water samples were above Class I water standard indicated in TWPCR, which classifies the water resources according to the different area of uses. It was also found that TOC has a small contribution to TC and the highest TOC content in stream waters were measured in Gumushane station where direct discharge of city wastewaters and solid waste dumping to the stream were observed.     

Analysing land cover changes for understanding of forest dynamics using temporal forest management plans

This study analyses forest dynamics and land use/land cover change over a 43-year period using spatial-stand-type maps of temporal forest management plans of Karaisal? Forest Enterprise in the Eastern Mediterranean Region of Turkey. Stand parameters (tree species, crown closures and developmental stages) of the dynamics and changes caused by natural or artificial intervention were introduced and mapped in a Geographic Information System (GIS) and subjected to fragmentation analysis using FRAGSTATS. The Karaisal? Forest Enterprise was first planned in 1969 and then the study area was planned under the Mediterranean Forest Use project in 1991 and five-term forest management plans were made. In this study, we analysed only four periods (excluding 1982 revision plans): 1969, 1991, 2002 and 2012. Between 1969 and 2012, overall changes included a net increase of 3,026 ha in forested areas. Cumulative forest improvement accounted for 2.12 % and the annual rate of total forest improvement averaged 0.08 %. In addition, productive forest areas increased from 36,174 to 70,205 ha between 1969 and 2012. This translates into an average annual productive forest improvement rate of 1.54 %. At the same time, fully covered forest areas with crown closure of “3” (>70 %) increased about 21,321 ha, and young forest areas in developmental stage of “a” (diameter at breast height (dbh)?<?8 cm) increased from 716 to 13,305 ha over the 43-year study period. Overall changes show that productive and fully covered forest areas have increased egregiously with a focus on regenerated and young developmental stages. A spatial analysis of metrics over the 43-year study period indicated a more fragmented landscape resulting in a susceptible forest to harsh disturbances.     

Recovery of copper and cobalt from ancient slag.

About 2.5 million tonnes of copper smelter slag are available in Küre, northern part of Turkey. This slag contains large amounts of metallic values such as copper and cobalt. A representative slag sample containing 0.98% Cu, 0.49% Co and 51.47% Fe was used in the experimental studies. Two different methods, direct acid leaching and acid baking followed by hot water leaching were used for recovering Cu and Co from the slag. The effects of leaching time, temperature and acid concentration on Cu- and Co-dissolving efficiencies were investigated in the direct acid leaching tests. The optimum leaching conditions were found to be a leaching time of 2 h, acid concentration of 120 g L(-1), and temperature of 60 degrees C. Under these conditions, 78% Cu and 90% Co were extracted. In the acid baking + hot water leaching tests, 74% Co was dissolved after 1 h of roasting at 200 degrees C using a 3:1 acid:slag ratio, whereas the Cu-dissolving efficiency was 79% and the total slag weight loss was approximately 50%.     

Removal of copper (II) from aqueous solution by adsorption onto low-cost adsorbents

The use of low-cost adsorbents was investigated as a replacement for current costly methods of removing metals from aqueous solution. Removal of copper (II) from aqueous solution by different adsorbents such as shells of lentil (LS), wheat (WS), and rice (RS) was investigated. The equilibrium adsorption level was determined as a function of the solution pH, temperature, contact time, initial adsorbate concentration and adsorbent doses. Adsorption isotherms of Cu (II) on adsorbents were determined and correlated with common isotherm equations such as Langmuir and Freundlich models. The maximum adsorption capacities for Cu (II) on LS, WS and RS adsorbents at 293, 313 and 333 K temperature were found to be 8.977, 9.510, and 9.588; 7.391, 16.077, and 17.422; 1.854, 2.314, and 2.954 mg g(-1), respectively. The thermodynamic parameters such as free energy (delta G0), enthalpy (delta H0) and entropy changes (delta S0) for the adsorption of Cu (II) were computed to predict the nature of adsorption process. The kinetics and the factors controlling the adsorption process were also studied. Locally available adsorbents were found to be low-cost and promising for the removal of Cu (II) from aqueous solution.     

Tri-generation investment analysis using Bayesian network: A case study

The increasing energy demand, increasing energy dependency, energy supply security, and environmental concerns have become a part of business policies since COP21 agreements in Paris, 2015. Combined cooling, heating, and power (CCHP or tri-generation) systems play an important role in paying the necessary attention to these policies. Tri-generation investment is a complex decision with hybrid use of energy resources. This article aims to reduce the complexity of this decision by the use of Bayesian belief networks in pre-investment stage of tri-generation investment project cycle. The proposed model gives an insight into decision analysis and helps the decision-makers either generate or purchase from it in order to meet the energy demand with different scenarios. The model is studied for a university case. The investment decision for a CCHP (tri-generation) system will be discussed as an alternative for purchasing the electricity and natural gas from the national grids.     

Determination of Pb(II), Zn(II), Cd(II), and Co(II) ions by flame atomic absorption spectrometry in food and water samples after preconcentration by coprecipitation with Mo(VI)-diethyldithiocarbamate

A new, simple, and rapid separation and preconcentration procedure, for determination of Pb(II), Cd(II), Zn(II), and Co(II) ions in environmental real samples, has been developed. The method is based on the combination of coprecipitation of analyte ions by the aid of the Mo(VI)–diethyldithiocarbamate–(Mo(VI)-DDTC) precipitate and flame atomic absorption spectrometric determinations. The effects of experimental conditions like pH of the aqueous solution, amounts of DDTC and Mo(VI), standing time, centrifugation rate and time, sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of the analyte ions. The preconcentration factors were found to be 150 for Pb(II), Zn(II) and Co(II), and 200 for Cd(II) ions. The detection limits were in the range of 0.1–2.2 μg L^?1 while the relative standard deviations were found to be lower than 5 % for the studied analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of certified reference material (CRM TMDW-500 Drinking Water). The procedure was successfully applied to seawater and stream water as liquid samples and baby food and dried eggplant as solid samples in order to determine the levels of Pb(II), Cd(II), Zn(II), and Co(II) ions.