Reducing the environmental impact of coal-washing practice in Australia

All Australian coal for export is washed — that is, the low-grade high-ash material is separated out and disposed of at the washery site. The coarse rejects are generally placed in embankments and the tailings are pumped into settling ponds. These methods of waste disposal can create environmental problems. In addition, they represent a significant energy loss, because about one-third of the waste material is combustible and is thus a potentially valuable source of energy. Laboratory studies at the CSIRO Division of Fossil Fuels at North Ryde, New South Wales, have shown that energy can be successfully recovered from washery wastes by the process of fluidized-bed combustion. A pilot fluidized-bed combustor, with a capacity of 2 tonnes/hour, is undergoing prolonged trial at the Clutha washery near Camden, New South Wales, in a joint project between the Joint Coal Board and CSIRO. The results from the pilot plant tests have provided the basis for a conceptual design and feasibility study for a full-scale tailings treatment plant. This study has indicated that fluidized-bed combustion:

1. offers an environmentally attractive and economically competitive alternative to the disposal of tailings in settling ponds, and
2. can be used to generate large quantities of energy from the wastes, reducing the energy lost in coal washing from around 16% to 6% of the coal mined.

     

The gas/particle partitioning of polycyclic aromatic hydrocarbons collected at a sub-Arctic site in Canada

Polycyclic aromatic hydrocarbons (PAH) were measured in air samples at a remote air monitoring site established in the Yukon Territory, Canada as part of a global project (International Polar Year; IPY) to study the potential for atmospheric long-range transport of anthropogenic pollutants to the Arctic. Gas- and particle-phase PAH were collected in polyurethane foam plugs and on glass fibre filters respectively from August 2007 to October 2009. PAH concentrations were found to be highest in the winter months and lowest in summer. The gas/particle partitioning coefficients of 3–5 ringed PAH were computed and seasonal averages were compared. In the summer time, lower molecular mass PAH exhibited relatively higher partitioning into the particle-phase. This particle-phase partitioning led to the shallowest slopes being recorded during summer for the log–log correlation plots between the PAH partition coefficients and their sub-cooled vapour pressures. Air mass back trajectories suggest that local impacts may be more important during the summer time which is marked by increased camping activities at camping sites in the proximity of the sampling station. In conclusion, both summer and wintertime variations in PAH concentrations and gas/particle partitioning are considered to be source- and phototransformation-dependent rather than dependent on temperature-driven shifts in equilibrium partitioning.     

Refined tunable methodology for characterization of contaminant-particle relationships in surface water

To understand contaminant transport in aquatic systems, it is essential to define the physical characteristics of the primary particulate carriers. The distribution of organic pollutants with particle-size class and particle morphology in a freshwater embayment (Hamilton Harbor, western Lake Ontario) was studied using a sequence of novel sample preparation and characterization techniques. Water samples (24 L) were fractionated according to particle-size distribution using differential cascade sedimentation and centrifugation methods. These size fractions were subsequently subjected to a physicochemical characterization using scanning transmission electron microscopy and energy-dispersive spectroscopy to identify flocs and individual colloidal particles in the size range of 1 nm to 1 mm in diameter. Analytical chemical analyses were performed to identify organic contaminants in extracts prepared from particle-size classes, including polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). The contaminant distribution trends were very similar for all compound classes studied; contaminants were primarily associated with fractions containing particles less than 2 mum in diameter. Morphological characterization of these fractions showed the majority of the particulates to be humic fractals. The results of this study show that contaminants in aquatic systems can be preferentially associated with specific types of particle carriers, the characteristics of which can be clearly defined in terms of size and morphology.     

Primary vegetative growth on an old tailings dam,Zawar mines

Tailings containing toxic qualities of heavy metals are a potential source of pollution. Stabilisation by vegetative methods have been found the most effective. In an attempt to vegetate tailings dams it has been noted that while certain milky latex containing plants can be grown without any preconditioning of the soil, almost any plant can be grown after proper conditioning. However, the plants grown there cannot be consumed by humans or cattle due to their high metal content.     

Chemical and biological profiles of sediments as indicators of sources of contamination in Hamilton Harbour. Part II: bioassay-directed fractionation using the Ames Salmonella/microsome assay

Bottom sediment and suspended sediment samples from Hamilton Harbour (western Lake Ontario) and from a major tributary were profiled using a bioassay-directed fractionation approach. Sample extracts were fractionated using an alumina/Sephadex gel clean-up procedure to afford non-polar aromatic fractions which were characterized using chemical analyses and the Ames/microsome bacterial assay in Salmonella typhimurium strains YG1025 with the addition of oxidative metabolism (S9), and YG1024 without S9. Non-polar aromatic fractions of selected samples were separated by normal phase HPLC into 1-min fractions which were subjected to bioassay analyses. The bioassays using strain YG1025+S9, a TA100-type strain, were performed to assess genotoxicity arising from the presence of polycyclic aromatic hydrocarbons (PAH). Fractions which exhibited mutagenic activity contained PAH with molecular masses of 252, 276 and 278 amu; these fractions contained over 80% of the genotoxicity attributable to PAH. Individual compounds identified using Gas Chromatography-Mass Spectrometry analyses in these active fractions included benzo[a]pyrene, indeno[cd]pyrene and dibenz[a,h]anthracene. The YG1025+S9 mutagenic activity profiles were similar for all samples. Mutagenic activity profiles generated using strain YG1024-S9, a TA98-type strain sensitive to compounds characteristic of mobile source emissions, were very different. The mutagenic activities in strain YG1024-S9 were greatest for harbour-suspended sediment samples collected from sites impacted by a major tributary. Suspended sediments collected near areas known to contain high levels of coal tar-contamination in the bottom sediments contained higher levels of genotoxic PAH than suspended sediments collected from other areas of the harbour.     

Chemical and biological profiles of sediments as indicators of sources of genotoxic contamination in Hamilton Harbour. Part I: analysis of polycyclic aromatic hydrocarbons and thia-arene compounds

Bottom sediment and suspended sediment samples from Hamilton Harbour (western Lake Ontario) and from a major tributary were profiled using polycyclic aromatic hydrocarbons (PAH) and thia-arenes as source apportionment tracers. Ratios of selected PAH and ratios of monomethyl and dimethyl/ethyl dibenzothiophenes to the parent dibenzothiophenes were calculated. Thia-arene and PAH profiles of Standard Reference Material SRM 1649 (urban dust/organics), SRM 1650 (diesel), SRM 1597 (coal tar), Hamilton coal tar and a composite Hamilton air particulate sample provided source sample data. The gas chromatography-mass spectrometry (GC-MS) chromatograms of all sample extracts were dominated by homocyclic PAH but interpretation of PAH profiles with respect to source was difficult. In contrast, thia-arene analyses revealed more distinct differences in profiles of samples collected in different areas of the harbour, including the tributary. These results indicated that areas of coal tar-contaminated sediment are potential contributors to the overall contaminant burden of sediments and suspended sediments in Hamilton Harbour. These data also indicated that contaminants related to mobile combustion sources were entering the harbour via a major tributary.