Drivers of carbon dioxide emissions: an empirical investigation using hierarchical and non-hierarchical clustering methods

The mitigation of CO2 emissions requires a global effort with common but differentiated responsibilities. In this paper, we identify clusters of CO2 emissions across 72 countries. First, using the stochastic version of the IPAT and employing the dynamic common correlated effects technique, we identify three key determinants affecting CO2 emissions (non-renewables, population, and real GDP). In the second step, both hierarchical and non-hierarchical clustering methods are considered to identify the optimal number of clusters. We identify two to four clusters with different member countries, and in particular establish that in most cases, a 2-cluster solution appears to be optimal. The contents of clusters vary slightly according to the clustering methods for each period. The clustering results from using only the overall CO2 emissions indicate that the countries we consider form three clusters, with China and the USA each within a single member cluster. The remaining 70 countries form the third cluster. Our findings reflect the prominent roles of China and the USA in overall CO2 emissions. Analyses with sub-period and largest emitters reflect a different clustering structure. Some policy recommendations in setting emission reductions are made, considering different clusters across countries.     

Pressurized liquid extraction of six tetracyclines from agricultural soils

Veterinary antibiotics used in agriculture can be introduced into the environment through land application of animal manure, accumulating in soils and groundwaters and posing a significant risk to human health and animal well-being. As the analysis of tetracyclines in soil is challenging due to their strong interaction with soil minerals and organic carbon, the objective of this study was to develop a reliable and reproducible method for quantitative analysis of chlortetracycline and oxytetracycline, and their respective metabolites in soils. A method based on pressurized liquid extraction (PLE) with in-cell clean-up was developed for the extraction of chlortetracycline and oxytetracycline and four likely metabolites from a set of four soils. Optimized conditions included a cell size of 22?mL, soil loading of 5?g, pH of 8.0, methanol:water ratio of 3:1, 50?°C, and two cycles. Soil extracts were analysed by high-performance liquid chromatography (HPLC) coupled with ion trap mass spectrometry (MS). Recoveries of seven tetracyclines from soil ranged from 41% to 110%. The limits of detection for tetracyclines were 0.08–0.3 µg g^?1 soil, and intra- and inter-day variation ranged from 0.12–0.34%. The proposed PLE method is suitable for quantification of tetracyclines in agricultural soils at typical concentrations expected in contaminated environments.     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. III. Emulsion-grade products

The thermal oxidative stability of various formulations based on emulsion-grade ABS was studied by the chemiluminescence technique. Emulsion products were found to be essentially less stable than ionic mass polymerization resins. Among the antioxidants studied, Santonox R is clearly more efficient than Irganox 1076 and Irganox 3114, and its superiority is reflected primarily in improved induction period values. The introduction of Tinuvin 770 and Tinuvin 328 UV stabilizers into emulsion resins does not change the durability of the products. In mixtures where both Irganox 1076 and UV stabilizers are present, a certain antagonistic effect was noted at high UV stabilizer concentrations.     

Development of a purpose built landfill system for the control of methane emissions from municipal solid waste

In the present paper, a new system of purpose built landfill (PBLF) has been proposed for the control of methane emissions from municipal solid waste (MSW), by considering all favourable conditions for improved methane generation in tropical climates. Based on certain theoretical considerations multivariate functional models (MFMs) are developed to estimate methane mitigation and energy generating potential of the proposed system. Comparison was made between the existing waste management system and proposed PBLF system. It has been found that the proposed methodology not only controlled methane emissions to the atmosphere but also could yield considerable energy in terms of landfill gas (LFG). Economic feasibility of the proposed system has been tested by comparing unit cost of waste disposal in conventional as well as PBLF systems. In a case study of MSW management in Mumbai (INDIA), it was found that the unit cost of waste disposal with PBLF system is seven times lesser than that of the conventional waste management system. The proposed system showed promising energy generation potential with production of methane worth of Rs. 244 millions/y ($5.2 million/y). Thus, the new waste management methodology could give an adaptable solution for the conflict between development, environmental degradation and natural resources depletion.     

Satellite Tracking of White-naped Crane Migration and the Importance of the Korean Demilitarized Zone

Satellite-tracking of 15 White-naped Cranes ( Grus vipio ) from their Japanese wintering grounds through the Korean Peninsula shows that there are four important regions for conserving migrant cranes: the Three Rivers Plain, the People's Republic of China; Lake Khanka, Russia; Kumya, North Korea; and—most importantly—the demilitarized zone of the Korean Peninsula. Two sites along the Korean demilitarized zone, Panmunch'om and Ch'olwon, were the most heavily used stopover sites, and they present complex international conservation challenges. Cranes stopped at these sites for up to 87.1% of their total migration time; cranes migrating to Zhalong Nature Reserve, China, made it their only lengthy stop. We report the migration routes and the importance of the identified stopover sites, and we outline conservation issues at those sites.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. IV. Comparative study of various stabilizers in mass polymerization and emulsion resins

The thermal oxidative stability of ionic and emulsion ABS with various antioxidants and UV stabilizers was studied. It was found that Santonox R provides better protection than Irganox 1076 to both resins. It is also the case in formulations with Tinuvin 770 and Tinuvin 328.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. 1. Influence of stabilizers and lubricants

The influence of lubricants, UV stabilizers, antioxidants, and metal deactivators on the resistance of ABS to thermal oxidation was studied by means of the chemiluminescence technique. Neither of the additives seems to affect significantly the induction period of oxidation. At the same time, the influence of various additives on the oxidation rate constant is remarkably different: the introduction of lubricants and UV stabilizers increases its value, while antioxidants and metal deactivators have the opposite effect. For the particular systems studied durability is decreased in samples containing the lubricant and UV stabilizers and increased in samples stabilized with the antioxidant and metal deactivator.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. II. ABS/polycarbonate (PC) blends

The thermal oxidative stability of various ABS/PC compounds was studied by means of the chemiluminescence technique. Similarly to pure ABS, Irganox 1076 and Irganox MD 1024 perform as moderate antioxidants in ABS/PC and (ABS/PC + lubricant) blends. Neither Tinuvin 144, Irgaphos 168, nor their mixture affects the durability of the ABS/PC blend. At the same time, (Irgaphos 168 + Tinuvin 144) in combination with Irganoxes was found to provide a noticeable enhancement in durability to the (ABS/PC + lubricant) system. Titanium dioxide pigments by themselves have only a slight influence on the oxidative stability of the ABS/PC blend. Durability of the (ABS/PC + pigment) and (ABS/PC + lubricant) systems was found to be the same and the overall protective effect of Irganox 1076 was similar in both the (ABS/PC + lubricant) and the (ABS/PC + lubricant + pigment) systems. Certain modifiers significantly improve the durability of the ABS/PC compounds, although their function may differ in the systems with and without pigments.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Evaluation of deep learning and transform domain feature extraction techniques for land cover classification: balancing through augmentation

Environmental Science and Pollution Research - The identification of features that can improve classification accuracy is a major concern in land cover classification research. This paper compares...