Financial and economic factors affecting the lignite prices in Turkey: An analysis of Soma and Can lignites

Using a simultaneous equation econometric model based on yearly data between 1997 and 2006 for the Aegean Lignite Enterprise this study examines factors that affect the lignite price in Turkey. The Aegean Lignite Enterprise produces and sells the lignite of Soma and Can and their data reflect the general Turkish situation. The results suggest that (1) lignite prices sold to the industry increase (decrease) depending on the decrease (increase) in the industrial production and (2) total electricity production and electricity price are the most important factors that potential investors and related persons have to take into consideration for the pricing of lignite in the thermal power plant market.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

Effect of temperature on seawater desalination-water quality analyses for desalinated seawater for its use as drinking and irrigation water

The effect of feed seawater temperature on the quality of product water in a reverse osmosis process was investigated using typical seawater at Urla Bay, Izmir region, Turkey. The tests were carried out at different feed seawater temperatures (11–23°C) using two RO modules with one membrane element each. A number of variables, including pH, conductivity, total dissolved solids, salinity, rejection percentage of a number of ions (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, HCO₃ ⁻, and SO₄ ²⁻), and the levels of boron and turbidities in collected permeates, were measured. The suitability of these permeates as irrigation and drinking water was checked by comparison with water quality standards.     

Mapping of Noise by Using Gis in ŞAnliurfa

Traffic noise results from highways where the most important source of noise in cities. This noise has the properties of linear source. Constitution of noise maps has become compulsory to see the regions that are influenced from the noise, and to put forward the future environmental approaches. During the mapping of the noise, generally two fundamental problems are encountered, excessive time requirement for the measurement of noise and determining the method for the constitution of maps.This study was conducted in Sanliurfa city of Turkey, in 3×4 km area. Continuous weekly data were obtained in 11 measurement points. By using these data in (GIS) environment, preparation of the most reliable map in the shortest time is achieved by the interpolation method.     

Evaluation of PCDD/F levels in ambient air and soils and estimation of deposition rates in Kocaeli, Turkey

PCDD/F analyses were made in soil and ambient air samples taken from Kocaeli, an industrialized area of Turkey. Results showed that the levels of PCDD/F pollution are comparable to the levels observed in the various urban areas in the world. PCDD/F concentrations in surface soils ranged between 0.4 and 4.27 pg I-TEQ kg(-1) with a geometric mean of 0.76 pg I-TEQ kg(-1), while those in ambient air were between 23 and 563 f gm(-3), with geometric mean of 82.0 f gm(-3). Ambient air PCDD/F concentration in the city center was about 10 times higher than those in the rural area. Combustion activities present in the area were assessed to be the most significant source of the PCDD/F pollution based on the congener and homologue profiles and statistical analysis of the data. The deposition rate modeling of USEPA was applied and the deposition rates were determined in the range between 7.6 and 66.3 ng I-TEQ m(-2)year(-1) with a geometric mean of 15.9 ng I-TEQ m(-2)year(-1). The rates were higher than the recommended deposition rates in relation to the tolerable daily intake (TDI) range of PCDD/Fs for humans. The deposition velocities computed were also found to be high in both low and highly chlorinated PCDD/Fs, and this was attributed to the vapor phase deposition of volatile PCDD/Fs, and the scavenging effect of the precipitation on the particle-bound PCDD/Fs.     

Experimental investigation of biodynamic human body models subjected to whole-body vibration during a vehicle ride

In this study, responses of biodynamic human body models to whole-body vibration during a vehicle ride were investigated. Accelerations were acquired from three different body parts, such as the head, upper torso and lower torso, of 10 seated passengers during a car ride while two different road conditions were considered. The same multipurpose vehicle was used during all experiments. Additionally, by two widely used biodynamic models in the literature, a set of simulations were run to obtain theoretical accelerations of the models and were compared with those obtained experimentally. To sustain a quantified comparison between experimental and theoretical approaches, the root mean square acceleration and acceleration spectral density were calculated. Time and frequency responses of the models demonstrated that neither of the models showed the best prediction performance of the human body behaviour in all cases, indicating that further models are required for better prediction of the human body responses.     

Conversion of leather wastes to useful products

The main objective of the present study is to investigate the production of useful materials from different kinds of leather waste. Three different types of tannery wastes (chromium- and vegetable-tanned shavings, and buffing dust) were pyrolyzed in a fixed bed reactor at temperatures of 450 and 600 °C under N₂ atmosphere. Gas, oil, ammonium carbonate and carboneous residue were obtained by pyrolysis. The effect of temperature and type of leather waste on product distribution of pyrolysis was investigated. Buffing dust gave the highest yield of oil (ca. 23%), while other wastes recorded yields of ca. 9%. Results of elemental analysis and column chromatography showed that pyrolysis oils could be used as fuel or chemical feedstock after re-treatment. The yields of carboneous residue (chars) were between 37.5% and 48.5% and their calorific value was between 4300 and 6000 kcal kg⁻¹, suitable for use as solid fuel. In addition, these chars were activated by CO₂ to obtain the activated carbon. The activated carbon having highest surface area (799.5 m² g⁻¹) was obtained from chromium-tanned shavings. Activated carbons prepared from chromium-tanned leather were presented as an adsorbant for the adsorption of dyes from aqueous solution.