Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

Study of new reinforcing materials for cementitious panel production

Environmental Science and Pollution Research - The development of building materials using new types of raw materials is currently on demand by society and the industry. It is intended to reduce...     

Climate change implications for the nest site selection process and subsequent hatching success of a green turtle population

Sandy beach habitat where sea turtles nest will be affected by multiple climate change impacts. Before these impacts occur, knowledge of how nest site selection and hatching success vary with beach microhabitats is needed to inform managers on how to protect suitable habitats and prepare for scientifically valid mitigation measures at beaches around the world. At a highly successful green turtle (Chelonia mydas) rookery at Akumal, Quintana Roo, Mexico, we measured microhabitat characteristics along the beach crawl (rejected sites) and related nest site conditions (selected sites) to subsequent hatching success rates for 64 nesting events. To our knowledge, this is the first study to report environmental data along the nesting crawl for a green turtle population and the first to use natural breaks in the data to describe their preferred habitat ranges. Our results indicate that turtles were likely using a combination of cues to find nest sites, mainly higher elevations and lower sand surface temperatures (Kruskal-Wallis test, H?=?19.84, p?<?0.001; H?=?10.78, p?<?0.001). Hatching success was significantly and negatively correlated to sand temperature at cloaca depth (Spearman’s ρ?=??0.27, p?=?0.04). Indeed, the preferred range for cloaca sand temperatures at the nest site (26.3–27.5 °C) had significantly higher hatching success rates compared to the highest temperature range (Tukey HSD?=?0.47, p?=?0.05). Sand temperatures at various depths were intercorrelated, and surface and cloaca depth sand temperatures were correlated to air temperature (ρ?=?0.70, p?=?0.00; ρ?=?0.26, p?=?0.04). Therefore, rising air temperatures could alter sand temperature cues for suitable nest sites, preferred nest site ranges, and produce uneven sex ratios or lethal incubating temperatures. Elevation cues and preferred ranges (1.4–2.5 m) may also be affected by sea level rise, risking inundation of nests.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

海洋环境中光合色素分析方法研究与应用进展

根据国内外的文献,综述了海洋环境中光合色素分析方法的发展状况,指出了其分析方法在发展过程中创新的主要方面,并对光合色素分析在赤潮监测、藻类的化学分类及生物碳生物量和矿物质通量方面的应用进行了展望。     

改性氢氧化镁制备及其去除地下水中Cr3+性能研究

氢氧化镁作为一种可缓慢释放OH-的碱,能使多数重金属离子转换为沉淀,而且不会引起太大的pH变化.但氢氧化镁难溶于水,在含水层中的迁移能力很差.若要用于地下水重金属污染修复,需要对氢氧化镁进行改性.因此,本文利用表面活性剂对氢氧化镁粉末进行改性,合成了氢氧化镁胶体,并对改性氢氧化镁的稳定性、粒度及其对Cr3+的稳定化效果进行了分析.结果表明,复配表面活性剂改性的氢氧化镁悬浮液稳定性好,粒径小,0.6~8.4μm的颗粒占82.41%.利用改性氢氧化镁对Cr3+污染地下水进行处理,其对Cr3+的去除机理主要为沉淀反应,氢氧化镁和Cr3+反应的质量比约为1.333∶1,氢氧化镁和初始Cr3+浓度对Cr3+的去除效果都有较大的影响.     

Myrothecium verrucaria NF-08产漆酶条件的响应面法优化及粗酶染料脱色研究

以半知菌属疣孢漆斑菌Myrothecium verrucaria NF-08为供试菌,采用响应面方法优化菌株产漆酶条件,并以其漆酶粗酶进行3种结构类型6种染料的脱色试验,考察了粗酶浓度、温度和p H值对脱色率的影响.两水平析因设计、中心组合设计和验证试验结果表明:葡萄糖浓度为15.4 g·L~(-1)、蛋白胨浓度为43.3 g·L~(-1)和培养基初始p H值为6.68时,漆酶活性达到最大值(25.58±1.60)U·m L~(-1),是单因素试验(16.82 U·m L~(-1))的1.52倍,提高了52.1%.以上述发酵条件获得的M.verrucaria NF-08漆酶粗酶对3种结构类型染料均有脱色效果,排序为偶氮类优于芳甲烷类优于蒽醌类.脱色率随粗酶浓度增大(2~8 U·m L~(-1))、反应温度升高(15~35℃)而上升,随p H值上升(4~10)而下降.粗酶浓度为5 U·m L~(-1),反应温度为25℃,p H值为4时,偶氮类染料铬黑T和芳甲烷类染料碱性品红即可几乎完全脱色,脱色率分别为99.2%和94.6%.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia usneoides (L.) in an industrialized area in Rio de Janeiro state, southeast Brazil--Part II: PCB and PAH

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic bromeliad species as biomonitor and measuring bulk deposition rates of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH). For the sum of PCB, overall deposition rates were between 17 and 314 ng/(m2 day) in winter and between 43 and 81 ng/(m2 day) in summer, respectively. Deposition rates of dioxin-like PCBs ranged from 0.14 to 2.8 pg WHO-TEQ/(m2 day) in winter and from 0.90 to 4.3 pg WHO-TEQ/(m2 day) in summer. PCB deposition rates (total PCB and WHO-TEQ) were in the same range in winter in V.R. and PNI. In summer, contamination levels in V.R. were 6-10-folds higher than in PNI. PCB concentrations in biomonitor samples from V.R. and PNI were in the same range in summer and in winter. Concentrations of total PCB ranged from 14 to 95 microg/kg dry matter (d.m.) in winter and from 18 to 27 microg/kg d.m. in summer, respectively. The TEQ values were between 1.7 and 4.1 ng WHO-TEQ/kg d.m. in winter and between 1.9 and 2.9 ng WHO-TEQ/kg d.m. in summer. PCB concentrations of di-ortho PCB but not of non-ortho PCB were a factor of 2-4 lower in summer in both areas. PCB congener profiles resembled those from technical formulations. The profiles shifted to the higher chlorinated congeners in summer, probable due to revolatilisation of the lighter components at higher temperatures. PCB profiles in biomonitor resembled those from deposition samples and the shift to the heavier congeners in summer was even more pronounced. PAH deposition rates were in a similar range in both areas (131-2415 ng/(m2 day)). PAH levels in biomonitor samples from V.R. were about one order of magnitude higher than in samples from PNI indicating the impact of local sources. PAH profiles revealed stationary thermal processes as main source of contamination in V.R. whereas in PNI, biomass burning seems to be the main contamination source.     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.