Evaluation of practicing safety features for hospital waste collection among Iran’s public hospitals

Journal of Material Cycles and Waste Management - Hospital waste management is imperative due to its impending health hazards. This study was meant to evaluate the strong safety awareness of...     

Nutrient removal in tropical subsurface flow constructed wetlands under batch and continuous flow conditions

The aim of this investigation was to evaluate the influence of batch versus continuous flow on the removal efficiencies of chemical oxygen demand (COD), nitrogen (N) and total phosphorus (TP) in tropical subsurface flow constructed wetlands (SSF CW). The quantitative role of the higher aquatic plants in nutrient removal in these two operational modes was also investigated. Results indicated no significant difference (p > 0.05) in COD removal between batch and continuous flow modes for either the planted or unplanted treatments. Furthermore, the batch-loaded planted wetlands showed significantly (p < 0.05) higher ammonium removal efficiencies (95.2%) compared with the continuously fed systems (80.4%), most probably because the drain and fill batch mode presented systematically more oxidized environmental conditions. With respect to TP removal, for both planted and unplanted beds, there was significant enhancement (p < 0.05) in batch flow operation (69.6% for planted beds; 39.1% for unplanted beds) as compared to continuous flow operation (46.8% for planted beds; 25.5% for unplanted beds). In addition, at a 4-day hydraulic retention time (HRT), the presence of plants significantly enhanced both ammonia oxidation and TP removal in both batch and continuous modes of operation as compared to that for unplanted beds. An estimation of the quantitative role of aeration from drain and fill operation at a 4-day HRT, as compared to rhizosphere aeration by the higher aquatic plant, indicated that drain and fill operation might account for only less than half of the higher aquatic plant's quantitative contribution of oxygen (1.55 g O2 per m2 per day for batch flow versus 1.13 g O2 per m2 per day for continuous flow).     

Investigating biodiversity trajectories using scenarios – Lessons from two contrasting agricultural landscapes

Agriculture is the major land use at a global scale. In addition to food production, multifunctionality of landscapes, including values and ecosystem services like biodiversity, recreation and culture, is now focus for management. This study explores how a scenario approach, involving different stakeholders, may help to improve landscape management for biodiversity conservation. Local farmers and executives at the County Administrative Board were invited to discuss rural development and conditions for farmland biodiversity in two Swedish landscapes. The potential biodiversity for three future land use scenarios for the two landscapes was discussed: nature conservation, outdoor recreation and energy production, and compared with current and historical landscapes in each region.Analyses of habitat areas, connectedness and landscape diversity suggested that the energy and recreation scenarios had a negative impact on farmland biodiversity, whereas the nature conservation scenario, the current and historically reconstructed landscapes had a higher potential for biodiversity. The farmers appreciated the nature conservation scenario, but also the energy production scenario and they highlighted the need of increased subsidies for management of biodiversity. The farmers in the high production area were less interested in nature quality per se. The executives had similar opinions as the farmers, but disagreed on the advantages with energy production, as this would be in conflict with the high biodiversity and recreational values. The local physical and socio-economical conditions differ between landscapes and potentially shaped the stakeholders emotional attachment to the local environment, their opinions and decisions on how to manage the land. We stress the importance of incorporating local knowledge, visions and regional prerequisites for different land uses in conservation, since site and landscape specific planning for biodiversity together with a flexible subsidy system are necessary to reach the conservation goals within EU.     

Crushed concrete as a phosphate binding material: a potential new management tool

To avoid eutrophication of receiving waters, effective methods to remove P in urban and agricultural runoff are needed. Crushed concrete may be an effective filter material to remove dissolved and particulate P. Five types of crushed concrete were tested in the laboratory to evaluate the retention capacity of dissolved P. All types removed P very effectively (5.1-19.6 g P kg(-1) concrete), while the possible release of bound P varied between 0.4 and 4.6%. The retention rate was positively related to a decreasing concrete grain size due to an increasing surface area for binding. The P retention was also related to a marked increase in pH (up to pH 12), and the highest retention was observed when pH was high. Under these circumstances, column experiments showed outlet P concentrations <0.0075 mg P L(-1). Furthermore, experiments revealed that release of heavy metals is of no importance for the treated water. We demonstrate that crushed concrete can be an effective tool to remove P in urban and agricultural runoff as filter material in sedimentation/infiltration ponds provided that pH in the treated water is neutralized or the water is diluted before outlet to avoid undesired effects caused by the high pH.     

Supporting Diverse Data Providers in the Open Water Data Initiative: Communicating Water Data Quality and Fitness of Use

Shared, trusted, timely data are essential elements for the cooperation needed to optimize economic, ecologic, and public safety concerns related to water. The Open Water Data Initiative (OWDI) will provide a fully scalable platform that can support a wide variety of data from many diverse providers. Many of these will be larger, well‐established, and trusted agencies with a history of providing well‐documented, standardized, and archive‐ready products. However, some potential partners may be smaller, distributed, and relatively unknown or untested as data providers. The data these partners will provide are valuable and can be used to fill in many data gaps, but can also be variable in quality or supplied in nonstandardized formats. They may also reflect the smaller partners' variable budgets and missions, be intermittent, or of unknown provenance. A challenge for the OWDI will be to convey the quality and the contextual “fitness” of data from providers other than the most trusted brands. This article reviews past and current methods for documenting data quality. Three case studies are provided that describe processes and pathways for effective data‐sharing and publication initiatives. They also illustrate how partners may work together to find a metadata reporting threshold that encourages participation while maintaining high data integrity. And lastly, potential governance is proposed that may assist smaller partners with short‐ and long‐term participation in the OWDI.     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Towards sustainability management systems in three Swedish local authorities

This paper explores the development towards sustainability management systems (SMSs) in three Swedish local authorities. Many local authorities have extensive experience in using standardised Environmental Management Systems (EMSs). Recently EMSs have extended their reach by widening the scope of the systems including other dimensions of sustainable development. Case studies have been performed in three of the most EMS-experienced local authorities in Sweden. These authorities have extended their EMSs into a sustainability management approach in different ways. This paper discusses the development, possible contributions, and constraints with this development. Expanding EMSs into SMSs can be seen as a learning process in which a larger systems perspective leads to increased awareness that the management system becomes limited by only managing environmental issues. Expanding the EMSs into SMSs may lead to a more complete view of the organisation's total impact on nature and society, and issues that need to be managed.