Is the reproduction of Donax trunculus affected by their sites of origin contrasted by their level of contamination?

The reproductive cycle of bivalves is regulated by several natural environmental factors but exposure to chemical pollutants can also interfere and may result in advanced or delayed spawning season. To our knowledge, the gametogenic cycle of the suspension-feeder bivalve Donax trunculus has not yet been used as biomonitoring tool in ecotoxicological surveys. The aim of this study was to examine over a year physiological reproductive endpoints (sex-ratio, gametogenic and energy reserve cycles) and biological indices (condition index, allometry) in D. trunculus originating from two sites differing by their level of contamination. Specimens were collected bimonthly from November 2008 to October 2009 from a polluted site (Radès Méliane) and a comparatively reference site (Sidi Jehmi) in the Gulf of Tunis (Tunisia). Five stages were depicted by histological examination of gonads: undifferentiated, developing, mature, spawn and spent. Differences in the gametogenic cycle according to the site of origin of bivalves were observed. The spawning period began in March and was maximum in May in bivalves from both sites, but the percentage of spawning animals was higher in the polluted site vs the reference site. The spawning period was shorter in animals from the polluted site comparatively to the reference site. Energy reserves (glycogen, lipids) were higher in March and May comparatively to the other studied periods in bivalves from both sites. Lower energy reserves levels were usually observed in animals from the polluted site compared to the reference site. Seasonal variations of the condition index were associated to the reproductive and nutritive status of bivalves. Differences in allometry were depicted between bivalves from both studied sites. If we try to link allometry, energy reserves and reproduction, it can be hypothesized that for bivalves from the reference site, energy reserves are allocated to gametogenesis and length growth. For bivalves from the polluted site, energy reserves could be devoted to tolerance to chemical stress and to reproductive processes. Therefore, D. trunculus appears as a suitable sentinel species for the assessment of the ecotoxicological risk of contaminants such as endocrine disruptors.     

Method development for determination of fluroxypyr in water

Improved methods for extraction and clean up of fluroxypyr residue in water have been established. Two methods of fluroxypyr extraction were used, namely, Direct Measurement of fluroxypyr and Concentration of fluroxypyr onto A Solid Phase Extraction (SPE) Adsorbent, followed by elution with solvent before determination of fluroxypyr. The recovery for Direct Measurement of fluroxypyr in water containing 8-100 microg L(-1), ranged from 86 to 110% with relative standard deviation of 0.7 to 2.15%. For the second method, three types of SPE were used, viz. C18, C18 end-capped and polyvinyl dibenzene (ISOLUTE ENV+). The procedure involved concentrating the analyte from fluroxypyr-spiked water at pH 3, followed by elution of the analyte with 4 mL of acentonitrile. The recovery of fluroxypyr from the spiked sample at 1 to 50 microg L(-1) after eluting through either C18 or C18 end-capped ranged from 40-64% (with relative standard deviation of 0.7 to 2.15) and 41-65% (with standard deviation of 1.52 to 11.9). The use of ISOLUTE ENV+, gave better results than the C18, C18 end-capped or the Direct Measurement Methods. The recovery and standard deviation of fluroxypyr from spiked water using ISOLUTE ENV+ ranged from 91-102% and 2.5 to 5.3, respectively.     

Quantification,characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts

Although investigation of microplastics (MPs) present in air environment has been intensively carried out, quantification, characteristics, and distribution of MPs released from the waste burning furnace (WBF) has been missing in literature. The aim of this study was to characterize the presence of MPs released from WBFs and analyze their associated health impacts. The examined locations were at two WBFs (nominated as TPS1 and TPS2) in Sidoarjo, Indonesia. MPs were collected using a 9 cm diameter glass beaker for a period of 8 h at two different sampling points, which are 3 and 15 m from each WBF. Several characteristics of MPs in terms of the number of particles, size, shape, color, and polymer type were comprehensively characterized. This study found that the obtained MPs were of fiber type and in the range of 46–77 and 41–59 particles at TPS1 and TPS2, respectively. In general, the polymer types of MPs were, respectively, cellophane and polytetrafluoroethylene at TPS1 and TPS2. Moreover, it was estimated that about 1.9–2.3 MPs can enter the human body via inhalation. This study offers a pilot examination of MPs released from WBF and findings from this study are crucial to provide new knowledge as a basis to carefully regulate the use of WBF particularly that are located closely to local community.     

Investigating effect of proton-exchange membrane on new air-cathode single-chamber microbial fuel cell configuration for bioenergy recovery from Azorubine dye degradation

Environmental Science and Pollution Research - One of the biggest challenges of using single-chamber microbial fuel cells (MFCs) that utilize proton-exchange membrane (PEM) air cathode for...     

Development of socio-technical disaster model

Using a grounded theory approach, six public inquiry reports were utilized to identify the phases associated with the development of socio-technical disasters. Despite the differences of disasters involved and their technologies, the disasters were found to exhibit common features and characteristics. The findings demonstrated that socio-technical disasters are not sudden cataclysmic events but they evolved in phases with long developmental period. A model of the sequential development of socio-technical disaster is proposed as consisting of ten phases namely operation, incubation, forewarning, activation, onset, rescue and recovery, inquiry and reporting, feedback, social justice, and social and legislation reform. This model reaffirms and advances developmental theory of disasters.     

Solid waste bin detection and classification using Dynamic Time Warping and MLP classifier

The increasing requirement for Solid Waste Management (SWM) has become a significant challenge for municipal authorities. A number of integrated systems and methods have introduced to overcome this challenge. Many researchers have aimed to develop an ideal SWM system, including approaches involving software-based routing, Geographic Information Systems (GIS), Radio-frequency Identification (RFID), or sensor intelligent bins. Image processing solutions for the Solid Waste (SW) collection have also been developed; however, during capturing the bin image, it is challenging to position the camera for getting a bin area centralized image. As yet, there is no ideal system which can correctly estimate the amount of SW. This paper briefly discusses an efficient image processing solution to overcome these problems. Dynamic Time Warping (DTW) was used for detecting and cropping the bin area and Gabor wavelet (GW) was introduced for feature extraction of the waste bin image. Image features were used to train the classifier. A Multi-Layer Perceptron (MLP) classifier was used to classify the waste bin level and estimate the amount of waste inside the bin. The area under the Receiver Operating Characteristic (ROC) curves was used to statistically evaluate classifier performance. The results of this developed system are comparable to previous image processing based system. The system demonstration using DTW with GW for feature extraction and an MLP classifier led to promising results with respect to the accuracy of waste level estimation (98.50%). The application can be used to optimize the routing of waste collection based on the estimated bin level.     

电增强环氧树脂基聚合物膜萃取水样中的硝基苯

以环氧树脂基聚合物膜为萃取相,在电场作用下富集目标物,与高效液相色谱(HPLC)联用,应用于环境水样中硝基苯污染物的测定.考察了电压大小、萃取时间、洗脱时间、离子强度和溶液pH值对电增强萃取效率的影响.实验结果表明,环氧树脂基聚合物膜的萃取量与膜上所施加的控制电位相关,阴极极化时,膜对硝基苯的萃取量增大;在阳极极化时,膜萃取量减小.在电压为-0.3kV,硝基苯溶液pH=4的条件下,萃取20min,得到该方法的检出限为0.015μg·mL-1,在0.05～3.0μg·mL-1范围内具有良好的线性关系,可决系数为0.9929,变异系数小于5%.用上述方法分析鱼塘水,硝基苯3种不同加标水平的回收率为79.8%～108.2%.结果表明,该方法既可用于环境水样品中的硝基苯去除又可用于检测.     

Malaysian households' drinking water practices: A case study

Malaysia has abundant water resources and adequate rainfall and yet the nation has water shortages and water quality problem. Various measures have been taken by the government to address water issues but, in spite of these, quantity and quality of drinking water is still one of the main concerns of Malaysian consumers today. An exploratory study was undertaken to determine the level of awareness of respondents on water issues, assess their perception on drinking water quality, and identify measures undertaken by households to improve drinking water quality and to determine sustainable water practices. A cross-sectional research design, utilizing a survey was conducted among urban residents of Seremban town. Data showed that each household had a mean of five members, with an average household income of RM3788.00 (US$1000). The respondents were Chinese (70%), Indian (23%) and Malay (7%). The majority of respondents rated the quality of water supplied to their house as poor (70%), while 16% rated it very poor. The respondents indicated that colour, odour and taste were the main problems with their tap water. Due to the poor tap water quality perceived by respondents, most took additional measures to improve its quality. Most (85%) purchased domestic water filters, 41% boiled water and 17% bought bottled water. The reasons for purchasing water were: concern for health, perception of poor tap water quality, and increasing water contamination and pollution in the country. Almost a quarter of respondents that had water filters mentioned the convenience because they did not have to boil water. Sustainable use of water by respondents was moderate, with a mean of 2.9 on a scale of 1 (never) to 4 (all the time). Some aspects of conservation, such as the promptness of repairing leaking pipes, planning activities to conserve water, and method of car washing could be improved. Advantages and limitations of different water technologies are discussed. Sustainable water practices are also proposed.     

Practices,attitudes and motives for domestic waste recycling

SUMMARY

Solid household waste management in Malaysia has reached a critical stage. Increasing population, urbanization and changing patterns of lifestyle have instigated the phenomenon. The 15 000 tonnes of garbage produced daily are thrown into 230 landfills nationwide, where 80% of them have only two years of life span left. Although recycling programmes were launched as early as 1990, only 5% of the wastes are recycled. The purpose of the present research was to ascertain the current management of household solid waste, attitude and motivational factors towards recycling. Data were collected using interview survey on 150 households in an urban residential area. The findings demonstrated that the respondents had very low awareness and knowledge regarding local domestic waste management. Separation of organic and non-organic wastes was rarely practised by 76% of the respondents. Most waste was thrown away, except for newspaper and aluminium cans which were regularly recycled, while furniture, and electrical items were reused by giving away or trading-in. The attitude of the respondents towards recycling was modest. Of the five motivational factors, intrinsic satisfaction and individual commitment were more important reasons for recycling than convenience, economic motivation and societal commitment. The results of the study indicated that, in order to overcome the solid waste crisis, the conscience of the individual needs to be raised through environmental awareness and concern, inculcation of sustainable consumption practices and education on waste management.     

Inquiries into Malaysia's socio-technical disasters: recommendations and lessons learnt

Most democratic countries hold inquiries into disasters. One of their key functions is to establish the cause of an event and to learn lessons in order to prevent a recurrence. In addition, they offer an opportunity for communal catharsis, permitting the public to vent anger, distress and frustration and to exert pressure for policy changes. Malaysia has experienced six landmark socio-technical disasters since 1968, which resulted in the proposal or amendment of various safety/emergency acts and regulations. The authors used a grounded theory approach utilising a constant comparative method to analyse the recommendations made by the inquiries into these events. Data indicate that social and technical recommendations comprise 85 and 15 per cent, respectively, of the total recommendations made by the inquiry committees. This paper offers suggestions for improving the management of inquiry tribunals, as they will remain a valuable source of information for society and corporations to learn from past incidents.