Comparative studies on toluene removal and pressure drop in biofilters using different packing materials

To select the best available packing material for malodorous organic gases such as toluene and benzene, biofilter performance was compared in biofilters employed different packing materials including porous ceramic (celite), Jeju scoria (lava), a mixture of granular activated carbon (GAC) and celite (GAC/celite), and cubic polyurethane foam (PU). A toluene-degrading bacterium, Stenotrophomonas maltophilia T3-c, was used as the inoculum. The maximum elimination capacities in the celite, lava, and GAC/celite biofilters were 100, 130, and 110 gm(-3) hr(-1), respectively. The elimination capacity for the PU biofilter was approximately 350 g m(-3) hr(-1) at an inlet loading of approximately 430 g m(-3) hr(-1), which was 2 to 3.5 times higher than for the other biofilters. The pressure drop gradually increased in the GAC/ celite, celite and lava biofilters after 23 day due to bacterial over-growth, and the toluene removal efficiency remarkably decreased with increasing pressure drop. Backwashing method was not effective for the control of biomass in these biofilters. In the PU biofilter however, backwashing allowed maintenance of a pressure drop of 1 to 3 mm H2O m(-1) and a removal efficiency of > 80%, indicating that the PU was the best packing material for toluene removal among the packing materials tested.     

Perfluorinated compounds in the Pearl River and Yangtze River of China

A total of 14 perfluorinated compounds (PFCs) were quantified in river water samples collected from tributaries of the Pearl River (Guangzhou Province, south China) and the Yangtze River (central China). Among the PFCs analyzed, perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) were the two compounds with the highest concentrations. PFOS concentrations ranged from 0.90 to 99 ng/l and <0.01–14 ng/l in samples from the Pearl River and Yangtze River, respectively; whereas those for PFOA ranged from 0.85 to 13 ng/l and 2.0–260 ng/l. Lower concentrations were measured for perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS), perfluorooctanesulfoamide (PFOSA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorononaoic acid (PFNA), perfluorodecanoic acid (PFDA), and perfluoroundecanoic acid (PFUnDA). Concentrations of several perfluorocarboxylic acids, including perfluorododecanoic acid (PFDoDA), perfluorotetradecanoic acid (PFTeDA), perfluorohexadecanoic acid (PFHxDA) and perfluorooctadecanoic acid (PFOcDA) were lower than the limits of quantification in all the samples analyzed. The highest concentrations of most PFCs were observed in water samples from the Yangtze River near Shanghai, the major industrial and financial centre in China. In addition, sampling locations in the lower reaches of the Yangtze River with a reduced flow rate might serve as a final sink for contaminants from the upstream river runoffs. Generally, PFOS was the dominant PFC found in samples from the Pearl River, while PFOA was the predominant PFC in water from the Yangtze River. Specifically, a considerable amount of PFBS (22.9–26.1% of total PFC analyzed) was measured in water collected near Nanjing, which indicates the presence of potential sources of PFBS in this part of China. Completely different PFC composition profiles were observed for samples from the Pearl River and the Yangtze River. This indicates the presence of dissimilar sources in these two regions.     

A device for sampling the mud‐water interface in eutrophic lakes and bogs for residue analysis

Abstract

A tubular device has been developed making it possible to obtain layered samples of loosely aggregated, flocculent material from bogs or eutrophic lakes. The samples are up to 50 cm long and 15 cm in diameter. The sampler is free from protuberances and intact, layered samples can be taken. The tubular part of the sampler is about 85 em long, the walls of the lower 25‐cm portion harbouring a pneumatic closing mechanism which is controlled from above the water surface. An extendible handle for manipulating the sampler and for guiding it into place, is fastened to the upper end of the sampling tube. The performance and the operation of the sampler in the field are described.     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

Factors determining the hatching success of Antarctic krill <Emphasis Type="Italic">Euphausia superba</Emphasis> embryo: lipid and fatty acid composition

The present study addresses the effect of maternal diet on hatching success and condition of embryos and larvae of Antarctic krill Euphausia superba. Lipid and fatty acid content and composition were determined in field and laboratory samples. Developmental stages analyzed in embryos included: multiple-cell, gastrula, and limb-bud stages. Larval stages analyzed included: nauplius I, nauplius II, and metanauplius. Laboratory-reared embryos were spawned by gravid females incubated under three feeding groups: (1) phytoplankton mixture, (2) phytoplankton mixture and minced clam, and (3) phytoplankton mixture, minced clam, and commercial larval food. Hatching success was highest in group 3 (100%), lowest in group 1 (0%), and highly variable in field samples (0–48%). Lipid decreased slightly in embryos during embryonic development, while large decreases in lipid were found during nauplius development. High levels of 18:2(n-6), 20:4(n-6), and 22:6(n-3) observed with group 3 samples coincided with high hatching success in krill embryos. The ratio of 22:6(n-3)/20:5(n-3) also correlated to hatching success of embryos. The fatty acid profile of embryos in group 3 was similar to that of the field-collected embryos, reflecting the contribution of the commercial larval food in the maternal diet. In our study, the maternal diet was found to influence the fatty acid composition of embryos and in turn affects the hatching success of krill. Specific polyunsaturated fatty acids appeared to play important roles in embryogenesis in krill.     

Damage from the Great East Japan Earthquake and Tsunami - A quick report

The Tohoku region, Northeast Japan, was hit by a gigantic earthquake which occurred in the Pacific close to Tohoku, and subsequently by a giant tsunami. These hazards have caused huge damage on the eastern coast Japan. The earthquake’s magnitude was 9.0, the strongest ever recorded in Japan. The tsunami was also historical as its run-up height reached over 39 m. As of early May, 2011, over 24 thousand people were reported as dead or missing. Moreover, serious accidents at the Fukushima Nuclear Power Plants No.1 were caused by the effects of the tsunami. Therefore, the damage faced by Japanese people can be seen as a giant composite disaster. Although Japan, and the northeast of Japan in particular, has over a long time period increased its preparedness against earthquakes and tsunamis, huge damage still occurred. This paper considers why this tragedy occurred, and what unrecognized factors contributed to the high vulnerability of the area. To assist in answering such questions, this paper presents a timely report of the features of the earthquake and tsunami, the damage they caused, and the early efforts for recovery and reconstruction.     

Distribution characteristics of PCBs in the sediments of the lower Nakdong River, Korea

The objective of this study is to investigate the distribution characteristics of polychlorinated biphenyl (PCB) congeners in sediments of the lower Nakdong River of Korea. The sediments were collected using a grab sampler in May 1999. PCBs were extracted in the Soxhlet extractor and cleaned by using adsorption chromatographic techniques and concentrated sulfuric acid. A HP6890 gas chromatograph equipped with an electron capture detector was used for quantification. The results of congener specific analysis showed that the total concentration is ranged over 1.1-141 ng/g dry weight. The levels of PCB congeners are significantly correlated with the total organic carbons (TOC) in the sediments. The major fractions of PCBs in these sediments are congeners containing 4, 5 or 6 chlorine atoms per biphenyl molecule.