Sorption and oxic degradation of the explosive CL-20 during transport in subsurface sediments

The abiotic sorption and oxic degradation processes that control the fate of the explosive CL-20, Hexanitrohexaazaisowurtzitane, in the subsurface environment were investigated to determine the potential for vadose and groundwater contamination. Sorption of aqueous CL-20 is relatively small (K(d) = 0.02-3.83 cm3 g(-1) for 7 sediments and 12 minerals), which results in only slight retardation relative to water movement. Thus, CL-20 could move quickly through unsaturated and saturated sediments of comparable composition to groundwater, similar to the subsurface behavior of RDX. CL-20 sorption was mainly to mineral surfaces of the sediments, and the resulting isotherm was nonlinear. CL-20 abiotically degrades in oxic environments at slow rates (i.e., 10s to 100s of hours) with a wide variety of minerals, but at fast rates (i.e., minutes) in the presence of 2:1 phyllosilicate clays (hectorite, montmorillonite, nontronite), micas (biotite, illite), and specific oxides (MnO2 and the ferrous-ferric iron oxide magnetite). High concentrations of surface ferrous iron in a dithionite reduced sediment degraded CL-20 the fastest (half-life < 0.05 h), but 2:1 clays containing no structural or adsorbed ferrous iron (hectorite) could also quickly degrade CL-20 (half-life < 0.2 h). CL-20 degradation rates were slower in natural sediments (half-life 3-800 h) compared to minerals. Sediments with slow degradation rates and small sorption would exhibit the highest potential for deep subsurface migration. Products of CL-20 oxic degradation included three high molecular weight compounds and anions (nitrite and formate). The 2-3.5 moles of nitrite produced suggest CL-20 nitro-groups are degraded, and the amount of formate produced (0.2-1.2 moles) suggests the CL-20 cage structure is broken in some sediments. Identification of further degradation products and CL-20 mineralization rates is needed to fully assess the impact of these CL-20 transformation rates on the risk of CL-20 (and degradation product) subsurface movement.     

Abiotic/biotic degradation and mineralization of N‐nitrosodimethylamine in aquifer sediments

The N‐nitrosodimethylamine (NDMA) degradation rate and mineralization rate were measured in two aquifer sediments that received treatments to create oxic, reducing, and sequential reducing/oxic environments. Chemically reduced sediments rapidly abiotically degraded NDMA to nontoxic dimethylamine to parts per trillion levels, then degraded to further products. NDMA was partially mineralized in reduced sediments (6 to 28 percent) at a slow rate (half‐life 3,460 h) by an unknown abiotic/biotic pathway. In contrast, NDMA was mineralized more rapidly (half‐life 342 h) and to a greater extent (30 to 81 percent) in oxic sediments with propane addition, likely by a propane monooxygenase pathway. NDMA mineralization in sequential reduced sediment followed by oxic sediment treatment did result in slightly more rapid mineralization and a greater mineralization extent relative to reduced systems. These increases were minor, so aerobic NDMA mineralization with oxygen and propane addition was the most viable in situ NDMA mineralization strategy. © 2008 Wiley Periodicals, Inc.     

Oxidative remobilization of biogenic uranium(IV) precipitates: effects of iron(II) and pH

The oxidative remobilization of uranium from biogenic U(IV) precipitates was investigated in bioreduced sediment suspensions in contact with atmospheric O2 with an emphasis on the influence of Fe(II) and pH on the rate and extent of U release from the solid to the aqueous phase. The sediment was collected from the U.S. Department of Energy Field Research Center (FRC) site at Oak Ridge, Tennessee. Biogenic U(IV) precipitates and bioreduced sediment were generated through anaerobic incubation with a dissimilatory metal reducing bacterium Shewanella putrefaciens strain CN32. The oxidative remobilization of freshly prepared and 1-yr aged biogenic U(IV) was conducted in 0.1 mol/L NaNO3 electrolyte with variable pH and Fe(II) concentrations. Biogenic U(IV)O2(s) was released into the aqueous phase with the highest rate and extent at pH 4 and 9, while the U remobilization was the lowest at circumneutral pH. Increasing Fe(II) significantly decreased U remobilization to the aqueous phase. From 70 to 100% of the U in the sediments used in all the tests was extractable at the experiment termination (41 d) with a bicarbonate solution (0.2 mol/L), indicating that biogenic U(IV) was oxidized regardless of Fe(II) concentration and pH. Sorption experiments and modeling calculations indicated that the inhibitive effect of Fe(II) on U(IV) oxidative remobilization was consistent with the Fe(III) oxide precipitation and U(VI) sorption to this secondary phase.     

Biotic and abiotic degradation of CL-20 and RDX in soils

The caged cyclic nitramine 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) is a new explosive that has the potential to replace existing military explosives, but little is known about its environmental toxicity, transport, and fate. We quantified and compared the aerobic environmental fate of CL-20 to the widely used cyclic nitramine explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in surface and subsurface soil microcosms. Soil-free controls and biologically attenuated soil controls were used to separate abiotic processes from biologically mediated processes. Both abiotic and biological processes significantly degraded CL-20 in all soils examined. Apparent abiotic, first-order degradation rates (k) for CL-20 were not significantly different between soil-free controls (0.018 < k < 0.030 d(-1)) and biologically attenuated soil controls (0.003 < k < 0.277 d(-1)). The addition of glucose to biologically active soil microcosms significantly increased CL-20 degradation rates (0.068 < k < 1.22 d(-1)). Extents of mineralization of (14)C-CL-20 to (14)CO(2) in biologically active soil microcosms were 41.1 to 55.7%, indicating that the CL-20 cage was broken, since all carbons are part of the heterocyclic cage. Under aerobic conditions, abiotic degradation rates of RDX were generally slower (0 < k < 0.032 d(-1)) than abiotic CL-20 degradation rates. In biologically active soil microcosms amended with glucose aerobic RDX degradation rates varied between 0.010 and 0.474 d(-1). Biodegradation was a key factor in determining the environmental fate of RDX, while a combination of biotic and abiotic processes was important with CL-20. Our data suggest that CL-20 should be less recalcitrant than RDX in aerobic soils.     

用大型底栖动物和ODP系统评价珠江的有机污染

采用大型底栖动物需氧有机体百分率ODP(oxygen demander percentage)法对广州珠江前航道、西航道和流溪河的下游段进行河流有机污染评价.结果显示:底栖动物需氧类群密度在三河段间分布确有显著性差异,并根据其ODP可以判断流溪河水质相对较好,水质级别为中国地表水环境质量标准(EQSSW)Ⅳ级,西航道和前航道水质级别都为Ⅴ级.通过测试,这一方法能成功地应用在珠江及流溪河,且该法可以较好地匹配于EQSSW五级评价系统,初步认为ODP系统可以成为一个较好的河流水质生物监测方法.图3表4参13     

Phytoremediation of Atrazine by Poplar Trees: Toxicity,Uptake, and Transformation

Toxicity, uptake, and transformation of atrazine [2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine] by three species of poplar tree were assessed. Poplar cuttings were grown in sealed flasks with hydrophonic solutions and exposed to various concentrations of atrazine for a period of two weeks. Toxicity effects were evaluated by monitoring transpiration and measuring poplar cutting mass. Exposure to higher atrazine concentrations resulted in decrease of biomass and transpiration accompanied by leaf chlorosis and abscission. However, poplar cuttings exposed to lower concentrations of atrazine grew well and transpired at a constant rate during experiment periods. Poplar cuttings could take up, hydrolyze, and dealkylate atrazine to less toxic metabolites. Metabolism of atrazine occurred in roots, stems, and leaves and became more complete with increased residence time in tissue. These results suggest that phytoremediation is a viable approach to removing atrazine from contaminated water and should be considered for other contaminants.     

Temperature effects on chlorinated-benzene sorption to hydrophobic surfaces

Sorption and desorption of chlorinated benzenes were investigated in a series of column experiments using porous silica that had phenyl groups bonded to the surface; the mass-fraction organic carbon was 0.016. Both sorption and desorption curves were asymmetrical, but they were mirror images of each other for most experiments, indicating good sorption reversibility. The resulting breakthrough curves were fit to an advection-dispersion mathematical model, with sorption as a first-order, reversible reaction. Significantly greater tailing in the chlorinated-benzene breakthrough curves versus the salt-tracer ones was evidence of slow sorption and desorption. ΔH° values for di-, tri- and tetra-chlorobenzene were 13–21 kJ mol₋₁, indicative of strong van der Waals binding. Despite these small values, slow desorption was attributed to slow binding and release rather than diffusion through the bonded organic phase. Desorption rates decreased in going from di- to tri- to tetra- to penta-chlorobenzene. This decrease was significantly more than the decrease in molecular-diffusion coefficients in the same series, suggesting a chemical rather than a physical rate control. There was less difference in sorption rates through the series, suggesting an inverse relation between partition coefficient and desorption rate. ΔG° values were −17 to −23 kJ mol⁻¹, giving TΔS° values of about 4 kJ mol⁻¹. Thus enthalpic contributions to sorption appear to be of greater importance than entropic contributions.     

Groundwater flow, multicomponent transport and biogeochemistry: development and application of a coupled process model

A research tool for modeling the reactive flow and transport of groundwater contaminants in multiple dimensions is presented. Arbitrarily complex coupled kinetic–equilibrium heterogeneous reaction networks, automatic code generation, transfer-function based solutions, parameter estimation, high-resolution methods for advection, and robust solvers for the mixed kinetic–equilibrium chemistry are some of the features of reactive flow and transport (RAFT) that make it a versatile research tool in the modeling of a wide variety of laboratory and field experiments. The treatment of reactions is quite general so that RAFT can be used to model biological, adsorption/desorption, complexation, and mineral dissolution/precipitation reactions among others. The integrated framework involving automated code generation and parameter estimation allows for the development, characterization, and evaluation of mechanistic process models. The model is described and used to solve a problem in competitive adsorption that illustrates some of these features. The model is also used to study the development of an in situ Fe(II)-zone by encouraging the growth of an iron-reducing bacterium with lactate as the electron donor. Such redox barriers are effective in sequestering groundwater contaminants such as chromate and TCE.     

Aluminum effect on dissolution and precipitation under hyperalkaline conditions: II. Solid phase transformations

The high-level radioactive, Al-rich, concentrated alkaline and saline waste fluids stored in underground tanks have accidentally leaked into the vadose zone at the Hanford Site in Washington State. In addition to dissolution, precipitation is likely to occur when these waste fluids contact the sediments. The objective of this study was to investigate the solid phase transformations caused by dissolution and precipitation in the sediments treated with solutions similar to the waste fluids. Batch experiments at 323 K were conducted in metal- and glass-free systems under CO2 and O2 free conditions. Results from X-ray diffraction (XRD), quantitative X-ray diffraction (QXRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and energy dispersive X-ray fluorescence spectroscopy (EDXRF) indicated that significant solid phase transformations occurred in the sediments contacted with Al-rich, hyperalkaline, and saline solutions. The XRD and QXRD analyses confirmed that smectite and most likely biotite underwent dissolution. The SEM and the qualitative EDS analyses confirmed the formation of alumino-silicates in the groups of cancrinite and probably sodalite. The morphology of the alumino-silicates secondary phases changed in response to changes in the Si/Al aqueous molar ratio. The transformations in the sediments triggered by dissolution (weathering of soil minerals) and precipitation (formation of secondary phases with high specific surface area and probably high sorption capacities) may play a significant role in the immobilization and ultimate fate of radionuclides and contaminants such as Cs, Sr, and U in the Hanford vadose zone.     

Aluminum effect on dissolution and precipitation under hyperalkaline conditions: I. Liquid phase transformations

Substantial amounts of self-boiling, Al-rich, hyperalkaline, and saline high-level waste fluids (HLWF) were deposited to the vadose zone at the Hanford Site, in Washington State. The objective of this study was to investigate the effects of similar fluids on the extent of dissolution and precipitation in the sediments. Metal- and glass-free systems were used to conduct batch experiments at 323 K under CO2 and O2 free conditions. Base-induced dissolution of the soil minerals was rapid in the first 48 h as indicated by immediate releases of Si and Fe into the soil solution. Potassium release lagged behind and dissolution of K-bearing minerals (mica and K-feldspar) proceeded faster only after 2 to 3 d of the experiment. Silicon and Fe release exhibited high dependence on aqueous [Al] (rate orders <-1), because Al decreased free OH concentration in the contact solution and probably inhibited soil mineral dissolution. Initial K release exhibited low dependence on [Al] (fractional rate orders). Initial dissolution rates calculated based on Si release varied with aqueous [Al] from 29.47 to 4.35 x 10(-12) mol m(-2) s(-1). Aluminum participated in the formation of the secondary phases (precipitation rates of 10(-8) mol s(-1)) but the overall precipitation rate of alumino-silicate secondary phases was probably controlled by aqueous [Si] (rates of 10(-9), and rate constants between 0.0054 and 0.0084 h(-1)). The changes in the soil solution chemistry (release of K, Si, Fe, and other elements) may play a significant role in the fate of radionuclides and contaminants like Cs, Sr, Cr, and U in the Hanford sediments.