Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

Determination of photosynthetic pigment composition in an individual phytoplankton cell in seas and lakes using fluorescence microscopy; properties of the fluorescence emitted from picophytoplankton cells

To develop a method for the determination of photosynthetic pigment species in individual phytoplankton cells, especially natural picophytoplankton cells, the fluorescence spectra of intact cells were studied with cultured phytoplankton. The study was made mainly with phycoerythrin-containing picophytoplankton collected off Japan in 1982 with reference to diatomal species and phycoerythrin-free cyanophycean species. The spectra were measured for cell suspensions with an ordinary spectrofluorometer, and for individual cells with a microscope spectrofluorometer, paying special attention to the effect of cell-fixation. Results indicated that: (1) the cell-fixation with the glutaraldehyde and paraformaldehyde mixture modified phycoerythrin emission from picophytoplankton markedly in its wavelength location and intensity, but (2) the emission from phycocyanin was affected far less, and (3) the emission from chlorophyll a was not altered. However, the phycoerythrin emission modified by the fixation was found to be easily distinguished from other emissions, and kept its intensity high enough for detection with a fluorescence microscope. The fluorescence properties after the fixation were kept unaltered for a long period of time. Based on the results, we propose a simple method for the determination of photosynthetic pigments in individual phytoplankton cells in seas and lakes using fluorescence microscopy. Results of our tests with natural samples of phytoplankton are presented, and problems for further improvement are also discussed.     

Two-phase flow insights into open-channel flows with suspended particles of different densities

The effect of particle density on the turbulent open-channel flow carrying dilute particle suspensions is investigated using two specific gravities and three concentrations of solid particles. The particles, identical in size and similar in shape, were natural sand and a neutrally buoyant plastic. The particles were fully suspended, and formed no particle streaks on the channel’s bed. Accordingly, the changes in the flow are attributed to the interactions between suspended particles and flow turbulence structures. Measurements were obtained by means of image velocimetry enabling simultaneous, but distinct, measurement of liquid and particle velocities. The experimental results show that, irrespective of particle specific gravity, particle suspension influences bulk velocity of flow and the Kármán coefficient, while friction velocity essentially remains constant. The results also show that particles in suspension modify local water turbulence over the flow depth, but in ways not accurately predicted using the customary parameters for characterizing turbulence modification.     

Removal of insoluble chloride from bottom ash for recycling

In order to recycle bottom ash and use it as raw material for cement production, the removal of insoluble chloride was investigated by testing various washing techniques. The present work is also focused on investigating the properties of insoluble chlorides and determining the conditions for dissolving these compounds in order to reduce the chlorine content to the required level, i.e., less than 0.1 wt%. Within this framework, the effect of washing with water and CO2 bubbling was investigated, because the main insoluble chloride found in bottom ash, i.e., Friedel's salt, can be dissolved by CO2. Then, in order to better understand the removal of Cl, Friedel's salt was artificially synthesized by hydration and then the effect of CO2 bubbling was investigated. If all chlorides in the ash are converted into Friedel's salt by hydration, all chlorides can then be dissolved by CO2 bubbling. In addition, the effect of pH on removing the remaining insoluble chlorides was investigated by washing the ash with sulfuric acid solution. It was found that the most effective technique to reduce the Cl content to less than 1000 ppm was washing with sulfuric acid solution, while keeping the pH value at less than 4. By using this method, Friedel's salt and other insoluble chlorides were dissolved.     

Resource Use Dynamics and Land-Cover Change in Ang Nhai Village and Phou Phanang National Reserve Forest, Lao PDR

This study integrated aerial photographs from 1952, 1981, and 1998, and a satellite image from 2000 with oral histories and socioeconomic surveys to assess changes in forest and land cover in Ang Nhai village, Laos. The study documents the history of resource use and changes in household access to resources in the village. Three distinctive trends were observed in terms of forest and land cover—forest degradation, deforestation, and regeneration. Project results suggest that land and forest cover change dynamically under different circumstances. The case study also points out that integration into the market economy can induce intensification of unused lowland areas, while removing pressures from upland areas previously used for supplementing agricultural production. In addition, the creation of a national reserve forest to restrict local access and forest use was an ineffective tool for regulating encroachment and logging activities.     

Industrial and urban symbiosis in Japan: Analysis of the Eco-Town program 1997–2006

Japan's Eco-Town Program spearheaded in Japan the integration of Industrial Symbiosis and Urban Symbiosis, seeking to maximise the economic and environmental benefit from close geographic proximity of industrial and urban areas, through the use of previously discarded commercial, municipal and industrial waste materials in industrial applications. The program established 26 Eco-Towns around Japan. Approximately 1.65 billion USD was invested in 61 innovative recycling projects, with an average government subsidy of 36%. In addition at least 107 other recycling facilities have been constructed without government subsidy. 14 Eco-Towns primarily contributed to improving industry's productivity, whilst 10 Eco-Towns primarily contributed to improving environmental amenity. In 16 Eco-Towns the private sector was the most important actor supporting local government in the realisation of the Eco-Town, whilst in 9 Eco-Towns this was civil society. The availability of investment subsidies, the coming into force of ambitious recycling legislation with quantified, product-specific targets, access to the significant technological resources of the private sector, and widespread recognition of the urgency to act on environmental issues, all contributed to the success of the Eco-Town Program.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

Uranium resource appraisal: Past trends and outlook for adequacy of supply

As uranium has practically no other industrial uses besides electricity generation, demand is determined by the requirements and stockpiling policies of electric utilities. The uranium market has experienced strong fluctuations and is currently affected by the reductions in nuclear forecasts resulting from the slowdown in electricity demand. Analysing supply/demand indicators proves, however, that in retrospect the development has been relatively smooth and it appears that oversupply is more a consequence of overly optimistic short-term expectations. In the future, especially in the long term, nuclear power policies continue to be concerned with striking a proper balance between increasing production capability and development of new reactor technologies which would be less dependent on the availability of uranium. A bounding scenario approach is applied in this article to the assessment of adequacy of supply under varying assumptions on the total installed nuclear capacity, available resource base and attainable production capability.     

Synthesis of hydrogarnet from molten slag and its hydrogen chloride fixation performance at high temperature

Hydrogarnet was synthesized hydrothermally below 200°C using molten slag obtained from municipal solid waste. For comparison, it was also synthesized using pure-phase CaO–Al₂O₃–SiO₂–H₂O, as reported previously. The structural and textural properties of this material were investigated using various analytical and spectroscopic techniques such as X-ray diffraction, X-ray fluorescence spectrometry, atomic absorption spectrometry (AAS), thermogravimetry/differential thermal analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The Cl⁻ fixation ability of hydrogarnet was investigated in the temperature range 500–800°C in a fixed-bed flow reactor using a HCl concentration (1000 p.p.m.v.) similar to that of incinerator exhaust gas. Under these experimental conditions, the hydrogarnet was capable of reducing the HCl gas level to less than 1 p.p.m.v. Analysis of the spent catalyst revealed that the hydrogarnet was being transformed into wadalite and CaCl₂ at high temperatures. The elution test for chromium ions in hydrogarnet obtained from slag was also used, and it was found that chromium ions were not eluted from hydrogarnet. Received: January 27, 2001 / Accepted: October 11, 2001