Enrichment of trace elements in the clay size fraction of mining soils

Reactive waste dumps with sulfide minerals promote acid mine drainage (AMD), which results in water and soil contamination by metals and metalloids. In these systems, contamination is regulated by many factors, such as mineralogical composition of soil and the presence of sorption sites on specific mineral phases. So, the present study dedicates itself to understanding the distribution of trace elements in different size fractions (<2-mm and <2-μm fractions) of mining soils and to evaluate the relationship between chemical and mineralogical composition. Cerdeirinha and Penedono, located in Portugal, were the waste dumps under study. The results revealed that the two waste dumps have high degree of contamination by metals and arsenic and that these elements are concentrated in the clay size fraction. Hence, the higher degree of contamination by toxic elements, especially arsenic in Penedono as well as the role of clay minerals, jarosite, and goethite in retaining trace elements has management implications. Such information must be carefully thought in the rehabilitation projects to be planned for both waste dumps.     

Contribution of residential wood combustion to PM10 levels in Portugal

Wood is commonly used in residential combustion for heating purposes; however, it can be a major source of air pollutants, namely fine particles, volatile organic compounds and carbon monoxide. Since 2004, the PM10 daily limit value has been surpassed in Portugal, and the European Commission has stated that plans and programs must be designed in order to reduce these levels. In Portugal, 18% of PM10 emissions are due to residential wood combustion, which may deeply impact the PM10 levels in the atmosphere. The main aim of this study is to investigate the impact of residential wood combustion on the air quality in Portugal. The air quality modelling system MM5/CHIMERE was applied over Portugal for a winter month, for the following three scenarios: the reference scenario, considering the actual emissions of PM10; scenario 1, where residential wood combustion emissions are not considered; and scenario 2, which takes into account a complete conversion from traditional fireplaces to certified appliances (with a 90% reduction in PM emissions). The residential wood combustion contribution to PM10 air quality concentration values during January 2007 ranges from 0 to 14 μg m^?3, with a mean contribution of 10 μg m^?3 in the Lisboa area and 6 μg m^?3 in the Porto region. Concerning the legislated values, the area where the daily average limit value (50 μg m^?3) is exceeded decreases by 46% in the simulation when residential combustion is not considered. The modelling results for scenario 2 are not significantly different from those for scenario 1. In summary, the regulation of the residential wood combustion sector is as an effective way to reduce the PM10 levels in the atmosphere as regards air quality plans and programs.     

UV-VIS spectroscopy of 2,4,6-trinitrotoluene-hydroxide reaction

Contamination of groundwater, surface water and soil by explosives has occurred at military sites throughout the world as a result of manufacture of explosive compounds, assembly of munitions, and deployment of explosives containing devices. Due to the adverse effects of explosives on humans and other natural receptors, a low cost means of decontaminating these areas of contamination is needed. Base-induced transformation of explosives has shown promise as a rapid, low cost, and minimally resource-intensive technology for detoxifying explosives in soil and water. In order to understand the reaction mechanism, a reaction mixture of 2:1:1 (water:2,4,6-trinitrotoluene (TNT):1 N KOH) was analyzed by UV/VIS spectrometry from 190 to 1,100 nm. Time course measurements were conducted at 25, 20, 15, and 12 degrees C. A factor analysis program was used to analyze the spectral data. Principal component analysis indicated that six principal components explained the spectra to within experimental error, with four factors explaining the majority of the variance. Test spectral vectors for four components were developed, including TNT, two intermediates, and the final product, and were tested against the abstract vectors. Two possible reaction mechanisms were suggested and tested to explain the spectral data.     

Bioaccumulation and depuration of chromium in the selected organs and whole body tissues of freshwater fish Cirrhinus mrigala individually and in binary solutions with nickel

Contamination of aquatic ecosystems with heavy metals has been receiving increased worldwide attention due to their harmful e ects on human health and other organisms in the environment. Most of the studies dealing with toxic e ects of metals deal with single metal species, while the aquatic organisms are typically exposed to mixtures of metals. Hence, in order to provide data supporting the usefulness of freshwater fish as indicators of heavy metal pollution, it has been proposed in the present study to investigate the bioaccumulation and depuration of chromium in the selected organs of freshwater fingerlings Cirrhinus mrigala, individually and in binary solutions with nickel. The results show that the kidney is a target organ for chromium accumulation, which implies that it is also the “critical” organ for toxic symptoms. The results further show that accumulation of nickel in all the tissues of C. mrigala is higher than that of chromium. In addition, the metal accumulations of the binary mixtures of chromium and nickel are substantially higher than those of the individual metals, indicating synergistic interactions between the two metals. Theoretically the simplest explanation for an additive joint action of toxicants in a mixture is that they act in a qualitatively similar way. The observed data suggest that C. mrigala could be suitable monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Growth and pollution convergence: Theory and evidence

Stabilizing pollution levels in the long run is a pre-requisite for sustainable growth. We develop a neoclassical growth model with endogenous emission reduction predicting that, along optimal sustainable paths, pollution growth rates are (i) positively related to output growth (scale effect) and (ii) negatively related to emission levels (defensive effect). This dynamic law reduces to a convergence equation that is empirically tested for two major and regulated air pollutants – sulfur oxides and nitrogen oxides – with a panel of 25 European countries spanning the years 1980–2005. Traditional parametric models are rejected by the data. More flexible regression techniques confirm the existence of both the scale and the defensive effect, supporting the model predictions.     

Bioaccumulation of lead and the influence of chelating agents in Catla catla fingerlings

Lead is a widespread element and one of the persistent and cumulative pollutants of the environment. The present study deals with the bioaccumulation of lead and the influence of chelating agents, meso 2,3-dimercaptosuccinic acid (DMSA), D-Penicillamine and CaNa₂EDTA in reducing the concentration of lead on the selected organs of Catla catla fingerlings for both acute and chronic exposures by using ICP-AES. It is inferred from the present findings that there was a correlation between environmental conditions and the heavy metal contents of the fish. The highest concentration of lead is found in kidney tissues and the lowest in muscle tissues. The accumulation pattern of lead in the selected organs of Catla catla is: kidney > liver > gill > brain > muscle. Also, it has been found that the treatment of chelating agents, DMSA, D-Penicillamine and CaNa₂EDTA reduces the concentration of lead significantly for both acute and chronic exposures. The results also show that DMSA is the most effective chelator of lead in reducing the body burden of C. catla fingerlings. The observed data further indicate that C. catla could be suitable for monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Image processing tools in the study of environmental contamination by microplastics: reliability and perspectives

Environmental Science and Pollution Research - Microplastic pollution is one of the greatest environmental concerns for contemporary times and the future. In the last years, the number of...     

Studies on the adsorption and kinetics of photodegradation of a model compound for heterogeneous photocatalysis onto TiO(2)

An investigation was made on the adsorption and kinetics of photodegradation of potassium hydrogenphthalate in an aqueous suspension of TiO(2). Two models, Langmuir and Freundlich, were used to describe the adsorption process and the model proposed by Langmuir-Hinshelwood (L-H) was employed to describe the kinetics of the photodecomposition reactions of hydrogenphthalate. The results of the adsorptions were fitted to the models proposed by Langmuir and Freundlich. Adsorption was found to be a function of the temperature, with adsorption capacity increasing from 2.4 to 4.5 mg/g when the temperature rose from 20 to 30 degrees C. The kinetic model indicates that the rate constant, k, of the first order reaction, is high in the 10.0 to 100 mg/l interval, which is coherent with the low value of the adsorption constant, K. The results fitted to the L-H model led to an equation that, within the range of concentrations studied here, theoretically allows one to evaluate the photodegradation rate.     

A review of approaches for classifying benthic habitats and evaluating habitat quality

We have assessed the current state of knowledge relative to methods used in assessing sub-tidal benthic habitat quality and the classification of benthic habitats. While our main focus is on marine habitat, we extensively draw on knowledge gained in freshwater systems where benthic assessment procedures are at an advanced stage of maturity. We found a broad range of sophistication/complication in terms of the methods applied in assessing and mapping benthic habitats. The simplest index or metric involved some assessment of species richness, while the most complicated required utilizing multi-variate analysis. The simplest mapping attempts equated physical substrate with benthic habitat while the most sophisticated relied on extensive environmental preference and groundtruth data for species of concern. The leading edge of methods for benthic habitat mapping involves combining the advances in optical and acoustic methods that allow for routine classifying and mapping of the seafloor with biological and habitat data for species of concern. The objective of this melding of dispirit methods is to produce benthic habitat maps with broad system wide coverage and sound biological underpinning. It is clear that the disparity in information density between the physical and biological sides of the equation currently hinder applicability and acceptability of benthic habitat mapping efforts. In addition to the lack of basic information on the biological and environmental tolerances of targeted species, the proliferation of metrics for characterizing and assessing biological conditions further clouds the usefulness of any broad scale mapping attempt. The problem of data density mismatch between physical and biological methods will likely not be solved until acoustic methods can routinely resolve the elusive biological components that make a physical substrate a habitat.