Quantification,characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts

Although investigation of microplastics (MPs) present in air environment has been intensively carried out, quantification, characteristics, and distribution of MPs released from the waste burning furnace (WBF) has been missing in literature. The aim of this study was to characterize the presence of MPs released from WBFs and analyze their associated health impacts. The examined locations were at two WBFs (nominated as TPS1 and TPS2) in Sidoarjo, Indonesia. MPs were collected using a 9 cm diameter glass beaker for a period of 8 h at two different sampling points, which are 3 and 15 m from each WBF. Several characteristics of MPs in terms of the number of particles, size, shape, color, and polymer type were comprehensively characterized. This study found that the obtained MPs were of fiber type and in the range of 46–77 and 41–59 particles at TPS1 and TPS2, respectively. In general, the polymer types of MPs were, respectively, cellophane and polytetrafluoroethylene at TPS1 and TPS2. Moreover, it was estimated that about 1.9–2.3 MPs can enter the human body via inhalation. This study offers a pilot examination of MPs released from WBF and findings from this study are crucial to provide new knowledge as a basis to carefully regulate the use of WBF particularly that are located closely to local community.     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.