Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Biocompatibility correlation of polymeric materials using human osteosarcoma cells

 Metal implants are the preferred materials to generate articular prostheses, plates, or bone pegs in orthopedic surgery. Although titanium and titanium alloys show a relatively good biocompatibility, clinical experience revealed that coating of the metallic implant surface may increase the biocompatibility. In a search for optimum bone implant surfaces, we determined polarity and contact angle parameters of a variety of polymers and substances and correlated the findings in a biocompatibility assay using an in vitro bone cell model. We report that an optimum adherence of SAOS-2 cells to such surfaces and a good vitality for polymers are characterized by water-based contact angles of 80° and 20° for advancing and receding probes, respectively. Received: 18 October 1999 / Accepted in revised form: 19 April 2000     

Formation of disinfection byproducts in typical Chinese drinking water

Eight typical drinking water supplies in China were selected in this study. Both source and tap water were used to investigate the occurrence of chlorinated disinfection byproducts (DBPs), and seasonal variation in the concentrations of trihalomethanes (THMs) of seven water sources was compared. The results showed that the pollution level for source water in China, as shown by DBP formation potential, was low. The most encountered DBPs were chloroform, dichloroacetic acid, trichloroacetic acid, and chlorodibromoacetic acid. The concentration of every THMs and haloacetic acid (HAA) compound was under the limit of standards for drinking water quality. The highest total THMs concentrations were detected in spring.