Preconcentration of metal ions through chelation on a synthesized resin containing O, O donor atoms for quantitative analysis of environmental and biological samples

Nascent Amberlite XAD-4 has been used as the polymeric support for the synthesis of a stable extractor of metal ions, by incorporating phthalic acid through azo bridging. Elemental analyses and infra-red spectral and thermal studies were carried out for its characterization. The water regain value and hydrogen ion capacity were found to be 12.50 and 5.75 mmol g^?1, respectively. The optimum pH range for the maximum sorption of Ni(II), Mn(II), Cu(II), Zn(II), Cd(II), Cr(III), and Co(II) was observed at pH 5.5–8.0 with the corresponding half-loading time (t _1/2) of 9, 5, 9, 9, 3, 9, and 5 min, respectively. The preconcentration factor for Ni(II), Mn(II), Cu(II), Zn(II), Cd(II), Cr(III), and Co(II) are 190, 190, 190, 180, 180, 160, and 160, with the corresponding limit of preconcentration in the range of 5.25–6.25 μg L^?1. The detection limits, for flame atomic absorption spectrophotometry, were found to be 0.62, 0.60, 0.65, 0.75, 0.72, 0.84, and 0.85 μg L^?1, respectively. Method has been successfully applied to the analysis of water samples, multivitamin formulations, infant food substitutes, hydrogenated oil, and fishes.     

Successful outcome following prenatal intervention in a female fetus with bladder outlet obstruction

Bladder outlet obstructions are a diverse and heterogeneous group of developmental abnormalities that generally involve obstruction of the proximal urethra in the male fetus. Indications for prenatal intervention are few and are usually restricted to the male fetus because bladder outlet obstruction in female fetuses is usually caused by complex cloacal development anomalies. We report on a female fetus with an enlarged bladder and a dilated proximal urethra (known as typical keyhole sign). A vesicoamniotic shunt was performed despite non-reassuring prognostic factors, but the procedure resulted in a successful outcome. We propose that in selected cases of bladder outlet obstruction, fetal intervention should be considered even when the fetus is female. Copyright © 2005 John Wiley & Sons, Ltd.     

Prenatal diagnosis of congenital epulis by three-dimensional ultrasound and magnetic resonance imaging

Congenital epulis is a benign intraoral tumor that has rarely been diagnosed prenatally. We report a fetus with congenital epulis diagnosed by three-dimensional (3-D) ultrasound and fetal magnetic resonance imaging (MRI) at 35 weeks' gestation. We show an image of congenital epulis using a new ultrasound technique, the 3-D multislice view, which shows images similar to CT or MRI. This is a short case report of congenital epulis diagnosed prenatally by 3-D ultrasound using multislice view and MRI. Copyright © 2006 John Wiley & Sons, Ltd.     

Upstream Fiscal Regime Incentives for Captured CO2-EOR

Environmental Modeling & Assessment - Several preliminary scoping studies have identified a significant potential for captured CO2 for enhanced oil recovery (EOR) projects outside North...     

Epoxidised Natural Rubber Filled Spent Coffee Ground Green Biocomposites

Journal of Polymers and the Environment - This study investigates the influence of spent coffee (SC), and potassium hydroxide (KOH) modified spent coffee (ACT-SC) as fillers on the mechanical and...     

New generation Amberlite XAD resin for the removal of metal ions: A review

The direct determination of toxic metal ions, in environmental samples, is difficult because of the latter's presence in trace concentration in association with complex matrices, thereby leading to insufficient sensitivity and selectivity of the methods used. The simultaneous removal of the matrix and preconcentration of the metal ions, through solid phase extraction, serves as the promising solution. The mechanism involved in solid phase extraction (SPE) depends on the nature of the sorbent and analyte. Thus, SPE is carried out by means of adsorption, ion exchange, chelation, ion pair formation, and so forth. As polymeric supports, the commercially availableAmberlite resins have been found very promising for designing chelating matrices due to its good physical and chemical properties such as porosity, high surface area, durability and purity. This review presents an overview of the various works done on the modification of Amberlite XAD resins with the objective of making it an efficient sorbent. The methods of modifications which are generally based on simple impregnation, sorption as chelates and chemical bonding have been discussed. The reported results, including the preconcentration limit, the detection limit, sorption capacity, preconcentration factors etc., have been reproduced.