Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Correlation of low-volatile organic chlorine (LVOCl) and PCDD/Fs in various municipal waste incinerators (MWIs)

Medium- and low-volatile organic chlorine (M/LVOCl) and PCDD/Fs in flue gas from various municipal waste incinerators (MWIs) were monitored. The sample for M/LVOCl was collected in an adsorption tube which was thermally desorbed and the amount of chlorine was measured by atomic emission spectrometry (AES) detection using radiofrequency helium plasma. The helium plasma excited chlorine having an optical emission line of 837.6 nm was monitored. The MVOCl and LVOCl were organic chlorine groups whose boiling points (bp) ranged from 70-120 degrees C and 170-270 degrees C, respectively. The compounds having bp 120-170 degrees C were distributed in two tubes. LVOCl correlated well with PCDD/Fs (ng/Nm3, r=0.81) in a wide range of 0.01-100 ng/Nm3 of PCDD/Fs, while the correlation of LVOCl vs. TEQ was less related (r=0.69). These results agreed with the fact that LVOCl monitored the amount of organic chlorine without molecular structure information, which is critical to toxicity. Since the bp of LVOCl was not identical with that of PCDD/Fs, the regression was effected by the conditions of the gas treatment devices. Because most data of 2001 were collected just after the installation of PCDD/Fs in MWIs, the regression of 2001 was slightly different from that of 2002-2003. Eliminating these initial unsteady data, the regression of LVOCl vs. PCDD/Fs became better, giving r= 0.86. Besides having PCDD/Fs as surrogates, M/LVOCl is valuable as a versatile element-selective organic chlorine monitor to improve thermal process control.     

Effect of seasonal variation in seawater dissolved mercury concentrations on mercury accumulation in the muscle of red sea bream (Pagrus major) held in Minamata Bay, Japan

Japanese stingfish (Sebastiscus marmoratus) and Bambooleaf wrasse (Pseudolabrus japonicas) are monitored annually for mercury pollution in Minamata Bay, Japan. The average total mercury concentration in the muscle of these two species in Minamata Bay was 0.36 mg?kg^?1 wet weight and 0.20 kg^?1 wet weigh, respectively, between 2008 and 2010. This is higher than levels elsewhere in Japan (0.125 mg?kg^?1 wet weight and 0.038 mg?kg^?1 wet weight, respectively). The FDA (2001) and EPA (2004) suggested that a proportion of mercury accumulated in fish is derived from seawater. We reared young red sea bream (Pagrus major) over a 2-year period in Minamata Bay and Nagashima (control) to evaluate the uptake of mercury from seawater and dietary sources. Fish were fed a synthesized diet that did not contain mercury. There was no difference in mercury accumulation in the muscle of red sea bream between Minamata Bay and Nagashima. Thus, our results suggest that the majority of mercury accumulated in fish muscle is not from seawater.     

Electrochemical oxidation of bisphenol A. Application to the removal of bisphenol A using a carbon fiber electrode

Leachate samples with a high strength of ammonium-nitrogen (NH4+-N) were collected from a local landfill site in Hong Kong. Two experiments were carried out to study (1) the inhibition of microbial activity of activated sludge by NH4+-N and (2) the chemical precipitation of NH4+-N from leachate as a preliminary treatment prior to the activated sludge process. The experimental results demonstrated that the efficiency of COD removal decreased from 97.7% to 78.1%, and the dehydrogenase activity of activated sludge decreased from 9.29 to 4.93 microg TF/mg MLSS, respectively, when the NH4+-N concentration increased from 53 to 800 mg/l. The experiment also demonstrated that the NH4+-N in the leachate can be quickly precipitated as MgNH4PO4 x 6H2O after addition of MgCl2 x 6H2O + Na2HPO4 x 12H2O. The NH4+-N concentration was reduced from 5618 to 112 mg/l within 15 min when a molar ratio of Mg2+:NH+:PO4(3-) = 1:1:1 was used. The optimum pH to reach the minimum solubility of MgNH4PO4 x 6H2O was found to be in the range of 8.5-9.0. Attention should be given to the high salinity formed in the treated leachate by using MgCl2 x 6H2O + Na2HPO4 x 12H2O, which may affect microbial activity in the following biological treatment processes. Using two other combinations of chemicals [MgO + 85%H3PO4 and Ca(H2PO4)2 x H2O + MgSO4 x 7H2O] could minimise salinity generation after precipitation, while they were less efficient for NH4+-N removal.     

Indigo carmine removal by charcoal from rice bran as an agricultural by-product

On the utilization of agricultural by-product, charcoal from rice bran was produced. The adsorption characteristics of indigo carmine onto charcoals from rice bran were investigated by the batch method. The yield and surface area of charcoal were decreased and increased with increase of carbonization temperature, respectively. The removal ratio of indigo carmine was high with the charcoal carbonized at higher temperature. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. The kinetic constant of adsorption removal for indigo carmine was rapid in the charcoal carbonized at higher temperature. The adsorption characteristics for indigo carmine removal by charcoal from rice bran were dominated by the value of their surface area.     

Recovery of seven kinds of cfc and cfc replacements on high‐surface area activated carbon

The adsorption isotherms, the constants of the Dubinin—Radushkevich plots, and the constants of the Langmuir plots of chlorofluorocarbon (CFC) and CFC replacements on high‐surface area activated carbon were investigated to estimate the recovery efficiency of CFC and CFC replacements. The adsorption and desorption of HFC134a on a high‐surface area activated carbon was much easier than that of CFC 113 and the CFC replacements. The recovery efficiency of CFC replacements depends on the hydrogen atoms in molecule. It is possible that the saturated amount adsorbed in the pores or on the surface of the activated carbon could be evaluated by the W_s constant of the the Langmuir equation and the W_o constant of the Dubinin‐Radushkevich equation. The a constant of the Langmuir equation and the BE_o constant of the Dubinin‐Radushkevich equation depend on the molecular composition.     

The growing role of web‐based geospatial technology in disaster response and support

This paper examines changes in disaster response and relief efforts and recent web‐based geospatial technological developments through an evaluation of the experiences of the Center for Geographic Analysis, Harvard University, of the Sichuan (2008) and Haiti (2010) earthquake responses. This paper outlines how conventional GIS (geographic information systems) disaster responses by governmental agencies and relief response organisations and the means for geospatial data‐sharing have been transformed into a more dynamic, more transparent, and decentralised form with a wide participation. It begins by reviewing briefly at historical changes in the employment of geospatial technologies in major devastating disasters, including the Sichuan and Haiti earthquakes (case studies for our geospatial portal project). It goes on to assess changes in the available dataset type and in geospatial disaster responders, as well as the impact of geospatial technological changes on disaster relief effort. Finally, the paper discusses lessons learned from recent responses and offers some thoughts for future development.     

Measurements of aerosol optical properties in central Tokyo during summertime using cavity ring-down spectroscopy: Comparison with conventional techniques

A highly sensitive cavity ring-down spectrometer (CRDS) was used to monitor the aerosol extinction coefficient at 532 nm. The performance of the spectrometer was evaluated using measurements of nearly monodisperse polystyrene particles with diameters between 150 and 500 nm. By comparing the observed results with those determined using Mie theory, the accuracy of the CRDS instrument was determined to be >97%, while the upper limit for the precision of the instrument was estimated to be 0.6–3.5% (typically 2%), depending on the particle number concentration, which was in the range of 30–2300 particles cm^?3. Simultaneous measurements of the extinction (b_ext), scattering (b_sca) and absorption (b_abs) coefficients of ambient aerosols were performed in central Tokyo from 14 August to 2 September 2007 using the CRDS instrument, two nephelometers and a particle/soot absorption photometer (PSAP), respectively. The value of b_ext measured using the CRDS instrument was compared with the sum of the b_sca and b_abs values measured with a nephelometer and a PSAP, respectively. Good agreement between the b_ext and b_sca + b_abs values was obtained except for data on days when high ozone mixing ratios (>130 ppbv) were observed. During the high-O₃ days, the values for b_sca + b_abs were ～7% larger than the value for b_ext, possibly because the value for b_abs measured by the PSAP was overestimated due to interference from coexisting non-absorbing aerosols such as secondary organic aerosols.     

Viability of using global standards for neighbourhood sustainability assessment: insights from a comparative case study

Neighbourhoods are increasingly gaining attention as planning units of great potential for contribution to sustainable development. Many assessment tools such as LEED-ND, BREEAM Communities and CASBEE-UD have been developed to examine the sustainability of neighbourhood development projects. Some of these tools are claimed to be suitable for assessment in different contexts, and LEED-ND has already been utilised in various countries. This study investigates the viability of using global standards through a series of comparative case studies. One certified case from each of the aforementioned tools is chosen and evaluated against its non-corresponding assessment tools. Selected cases are, respectively, Hoyt Yards, MediaCityUK and Koshigaya Lake Town. Results of this study provide evidence that casts doubt on the viability of using global standards. The paper concludes that neighbourhood sustainability assessment should be regarded as a pluralistic practice. This implies that any realistic and reliable assessment should take account of the specificities of specific locations and varying needs of different stakeholders.