Hydrocarbon emissions speciation in diesel and biodiesel exhausts

Diesel engine emissions are composed of a long list of organic compounds, ranging from C₂ to C₁₂₊, and coming from the hydrocarbons partially oxidized in combustion or produced by pyrolisis. Many of these are considered as ozone precursors in the atmosphere, since they can interact with nitrogen oxides to produce ozone under atmospheric conditions in the presence of sunlight. In addition to problematic ozone production, Brookes, P., and Duncan, M. [1971. Carcinogenic hydrocarbons and human cells in culture. Nature.] and Heywood, J. [1988. Internal Combustion Engine Fundamentals.Mc Graw-Hill, ISBN 0-07-1000499-8.] determined that the polycyclic aromatic hydrocarbons present in exhaust gases are dangerous to human health, being highly carcinogenic.The aim of this study was to identify by means of gas chromatography the amount of each hydrocarbon species present in the exhaust gases of diesel engines operating with different biodiesel blends. The levels of reactive and non-reactive hydrocarbons present in diesel engine exhaust gases powered by different biodiesel fuel blends were also analyzed.Detailed speciation revealed a drastic change in the nature and quantity of semi-volatile compounds when biodiesel fuels are employed, the most affected being the aromatic compounds. Both aromatic and oxygenated aromatic compounds were found in biodiesel exhaust. Finally, the conservation of species for off-side analysis and the possible influence of engine operating conditions on the chemical characterization of the semi-volatile compound phase are discussed.The use of oxygenated fuel blends shows a reduction in the Engine-Out emissions of total hydrocarbons. But the potential of the hydrocarbon emissions is more dependent on the compositions of these hydrocarbons in the Engine-Out, to the quantity; a large percent of hydrocarbons existing in the exhaust, when biodiesel blends are used, are partially burned hydrocarbons, and are interesting as they have the maximum reactivity, but with the use of pure biodiesel and diesel, the most hydrocarbons are from unburned fuel and they have a less reactivity. The best composition in the fuel, for the control of the hydrocarbon emissions reactivity, needs to be a fuel with high-saturated fatty acid content.     

Prediction of SO2 levels using neural networks

In this paper, we present an adaptation of the air pollution control help system in the neighborhood of a power plant in As Pontes (A Coru?a, Spain), property of Endesa Generación S.A., to the European Council Directive 1999/30/CE. This system contains a statistic prediction made half an hour before the measurement, and it helps the staff in the power plant prevent air quality level episodes. The prediction is made using neural network models. This prediction is compared with one made by a semiparametric model.     

Numerical Modeling of the Impact of a Pumped-Storage Hydroelectric Power Plant on the Reservoirs’ Thermal Stratification Structure: a Case Study in NW Spain

Pumped-storage hydroelectric power plants are generally perceived as an environmentally respectful technology. Nevertheless, the pumping of water from a lower reservoir to an upper impoundment, and the return of that water during power generation, can strongly affect the water quality of the reservoirs. In particular, plant operation can alter their thermal structure, deep water mixing, and water circulation characteristics. The objective of this study is to quantify, through the use of 3D hydrodynamic modeling, the potential impacts of a pumped-storage hydroelectric plant on the thermal stability and mixing of two reservoirs in Galicia, northwest of Spain. To this end, three-dimensional hydrodynamic simulations were conducted using the model Delft3D. Two different coupled models, one for each reservoir, were constructed and subsequently tested for several stratification scenarios, according to measured temperature profiles during the spring and summer season. Several reservoir minimum and maximum operation water levels were also considered. Model simulations demonstrated a high level of mixing in the vicinity of the intake-outlet structures, in particular during startup of the power plant, regardless of the water level in the reservoir. Beyond this area, the results showed a limited overall effect on stratification and mixing in the upper reservoir, owing to the relation between the inflow temperatures and the initial temperature profile of this reservoir. A more significant alteration of the thermal structure is expected in the lower reservoir due to its narrow shape and shallow depth at the structure location, as well as the temperature differences between receiving waters and inflow.     

Phosphorus effect on Zn adsorption-desorption kinetics in acid soils

The adsorption-desorption kinetics of Zn in the absence and presence of P was studied by using the stirred flow chamber technique. The results thus obtained were compared with those previously obtained for Cu. As with copper, the simultaneous addition of P and Zn in a 1:1 mole ratio to soil was found to significantly increased Zn adsorption relative to the absence of P. Unlike Cu, however, Zn was only adsorbed at fast adsorption sites in the absence of P. In any case, the increased adsorption of Zn in the presence of P was largely due to slow adsorption sites, where Zn²⁺ ion acted as a bridging element between P and organic matter. Following adsorption in both the presence and absence of P, Zn was desorbed to a much higher extent than was Cu. However, the proportion of Zn desorbed after adsorption in the presence of P was significantly lower than in the absence of P. This indicates that Zn binds more strongly to adsorbing surfaces in the presence of P than in its absence.     

Assessing the effects of heavy metal contamination on the proteome of the moss Pseudoscleropodium purum cross-transplanted between different areas

Protein expression was assessed in samples of Pseudoscleropodium purum cross-transplanted between one unpolluted (UNP) and two polluted (POLL) sites. Firstly, the level of expression (LE) of 17 proteins differed between native mosses from both types of sites, but differences were only maintained throughout the experiment for 5 of them. The LE of these five proteins changed over time in mosses transplanted from UNP to POLL and vice versa, becoming similar to that in autotransplants. However, these changes occurred slower than changes in the heavy metal concentrations measured in the same samples, and therefore they were not related to atmospheric pollution. Although the proteins identified were associated with moss metabolism, the expected growth reduction in samples autotransplanted within POLL (as a result of the down-regulation of photosynthesis-related proteins), did not occur. This supports the hypothesis that mosses growing in polluted areas adapt to heavy metal pollution and are able to reduce/overcome their toxic effects (i.e., reduced growth). Nevertheless, further specific research must be carried out to identify the proteins involved in this type of response, as lack of information on the bryophyte genome precludes us from reaching further conclusions.     

As(V) retention on soils and forest by-products and other waste materials

As(V) retention capacity is determined by means of adsorption/desorption trials performed for coarse and fine ground mussel shell, forest and vineyard soils with or without fine shell, pine wood ash, oak wood ash, pine sawdust and slate-processing fines. Pine ash shows the highest arsenic retention potential (with >97 % adsorption and ≤1 % desorption), followed by shell-amended forest soil (adsorption between 96 and 92 %), by un-amended forest soil (adsorption between 98 and 86 %) and by the amended vineyard soil (adsorption between 92 and 75 %). Sawdust is the material with the lowest arsenic retention capacity in most cases, with un-amended vineyard soil also showing poor results. In the case of oak ash, As(V) percentage adsorption becomes higher with increasing added arsenic concentrations, while this increase in added arsenic causes lower percentage adsorption in the case of slate fines. Regarding adsorption ability, As(V) adsorption data were fitted to Freundlich and Langmuir models, showing good fitting, with pine ash and shell-amended forest soil having the highest K _F values. In view of that, mussel shell amendment would be useful to increase arsenic retention on forest and vineyard soils, while pine ash could be used to retain arsenic even from wastewaters.     

Diet and environment 1.2 million years ago revealed through analysis of dental calculus from Europe’s oldest hominin at Sima del Elefante,Spain

Sima del Elefante, Atapuerca, Spain contains one of the earliest hominin fragments yet known in Europe, dating to 1.2 Ma. Dental calculus from a hominin molar was removed, degraded and analysed to recover entrapped remains. Evidence for plant use at this time is very limited and this study has revealed the earliest direct evidence for foods consumed in the genus Homo. This comprises starchy carbohydrates from two plants, including a species of grass from the Triticeae or Bromideae tribe, meat and plant fibres. All food was eaten raw, and there is no evidence for processing of the starch granules which are intact and undamaged. Additional biographical detail includes fragments of non-edible wood found adjacent to an interproximal groove suggesting oral hygiene activities, while plant fibres may be linked to raw material processing. Environmental evidence comprises spores, insect fragments and conifer pollen grains which are consistent with a forested environment.     

Biodegradation of paper waste under controlled composting conditions

The presence of paper in municipal solid waste (MSW) interferes with the efficiency of composting plants. The compost feedstock to these plants is between 12% and 27% paper on a dry weight basis, with an initial C:N ratio ranging from 32:1 to 57:1. Tests of the last aerobic biodegradability (LAB) of the type of paper present in paper and cardboard packaging were carried out, following UNE-EN 14046 standards. The results obtained, measured through the quantity of CO₂ generated over 45 days, compared with the maximum that could be produced (ThCO₂), showed that the presence of paper retards, to a great degree, the biodegradation of organic material in general. Specifically, the presence of papers with a degradation D (%) >60% at 45 days (white (W) and recycled paper (R)) could be allowed, but always in proportions that did not exceed 27% in dry weight. These results can be achieved with an industrial level process, pre-treated by trituration.     

Chromatographic retention-activity relationships for prediction of the toxicity pH-dependence of phenols

An investigation of the use of the chromatographic retention (log k) as an in vitro approach for modeling the pH-dependence of the toxicity to Guppy of phenols is developed. A data set of 19 phenols with available experimental toxicity-pH data was used. The importance of the mechanism of toxic action (MOA) of phenols was studied. log k data at three pH values were used for the phenols classification and two groups or 'MODEs' were identified. For one 'MODE' a quantitative retention-activity relationship (QRAR) model was calculated. Finally, the model was used to assess the toxicity to Guppy of phenols at different pH values. The results of this investigation suggest that chromatographic retention data allows fish toxicity modeling, in the 5.5-8 pH range of interest.     

Mercury removal using ground and calcined mussel shell

We determined mercury retention on calcined and ground mussel shell, in presence and absence of phosphate, using batch and stirred flow chamber experiments. In batch experiments the calcined shell exhibited higher Hg adsorption, with good fitting to Freundlich equation （R^2： 0.925-0.978）; the presence of phosphate increased Hg adsorption; mercury desorption was 13% or lower, diminishing up to 2% under the presence of phosphates. In stirred flow chamber experiments calcined shell retained more Hg than ground shells （6300 vs. 4000-5200 μmol/kg）; Hg retention increased an additional 40% on calcined shell and up to an additional 70% on ground shells when phosphates were present; mercury desorption was quite similar in all shell types （20%-34%）, increasing up to 49%-60% in ground shells when phosphates were present. The higher Hg adsorption on calcined shell would be related to its calcite and dolomite concentrations; mercury-phosphate interactions would cause the increase in Hg retention when phosphates are present. Data on Hg desorption suggest that Hg retention was not easily reversible after batch experiments, increasing in the stirred flow chamber due to convective flow. Calcined and ground mussel shells could be recycled removing Hg from water, with the presence of phosphates in solution improving efficacy.