Fast,cheap, and imperfect? US public opinion about solar geoengineering

ABSTRACT

Solar geoengineering, which seeks to cool the planet by reflecting a small fraction of sunlight back into space, has drawn the attention of scientists and policymakers as climate change remains unabated. Unlike mitigation, solar geoengineering could quickly and cheaply lower global temperatures. It is also imperfect. Its environmental impacts remain unpredictable, and its low cost and immediate effects may result in ‘moral hazard,’ potentially crowding out costly mitigation efforts. There is little understanding about how the public will respond to such tradeoffs. To address this, a 1000-subject nationally representative poll focused on solar geoengineering was conducted as part of the Cooperative Congressional Election Study (CCES) of the US electorate in October–November 2016. The importance that individuals place on solar geoengineering’s speed and cost predicts their support for it, but there is little to no relationship between their concerns about its shortcomings and support for its research and use. Acquiescence bias appears to be an important factor for attitudes around solar geoengineering and moral hazard.     

Transport of Pollutant in Open Channel with Short Waves

This study examines the effect of short period water waves on the longitudinal mixing of pollutants in open channel flow. These waves create orbital motions and therefore increase the magnitude of the dispersion coefficient. Experiments are conducted for non-wavy and wavy flow. The values of the longitudinal dispersion coefficients are determined by applying the method of least squares to the measured solute concentrations at various time intervals. For non-wavy flow, the measured values of longitudinal dispersion coefficient match closely with those computed from the empirical equation given by Seo [1]. For wavy flow, a new factor called the wave parameter (a/TU _*, a=wave amplitude, T=wave period, U _*=shear velocity) is found important and a nonlinear multiple regression analysis is used to derive a new expression for the wave induced longitudinal dispersion coefficient (WILDC). An uncertainty analysis is conducted as per IS Code 5168 and the confidence interval is determined. Linear water wave theory is applied to modify the existing expression of the longitudinal dispersion coefficient of Seo [1] by including the effect of short waves. A mathematical model for WILDC is then developed. Comparative study between wavy and non-wavy flow cases has been conducted. The results clearly show an increase in the magnitude of longitudinal dispersion coefficient in the presence of waves.     

Role of ethylene diurea (EDU) in assessing impact of ozone on Vigna radiata L. plants in a suburban area of Allahabad (India)

A field study was conducted to evaluate the suitability of ethylene diurea (N-[2-(2-oxo-1-imidazolidinyl)ethyl]-N'-phenylurea; EDU) in assessing the impact of O3 on mung bean plants (Vigna radiata L. var. Malviya Jyoti) grown in suburban area of Allahabad city situated in a dry tropical region of India. EDU is a synthetic chemical having anti-ozonant property. Mean monthly O3 concentration varied between 64 and 69 microg m(-3) during the experimental period. In comparison to EDU-treated plants, non-EDU-treated plants showed significant reductions in plant growth and yield under ambient conditions. Significant favourable effects of EDU-application were observed with respect to photosynthetic pigments, soluble protein, ascorbic acid and phenol contents. EDU-treated plants maintained higher levels of pigments, protein and ascorbic acid in foliage as compared to non-EDU-treated ones. The study clearly demonstrated that EDU alleviates the unfavourable effects of O3 on mung bean plants, and therefore can be used as a tool to assess the growth and yield losses in areas having higher O3 concentrations.     

Removal of arsenic from water by electrocoagulation

In the present study electrocoagulation (EC) has been evaluated as a treatment technology for arsenite [As(III)] and arsenate [As(V)] removal from water. Laboratory scale experiments were conducted with three electrode materials namely, iron, aluminum and titanium to assess their efficiency. Arsenic removal obtained was highest with iron electrodes. EC was able to bring down aqueous phase arsenic concentration to less than 10 microgl(-1) with iron electrodes. Current density was varied from 0.65 to 1.53 mAcm(-2) and it was observed that higher current density achieved rapid arsenic removal. Experimental results at different current densities indicated that arsenic removal was normalized with respect to total charge passed and therefore charge density has been used to compare the results. Effect of pH on arsenic removal was not significant in the pH range 6-8. Comparative evaluation of As(III) and As(V) removal by chemical coagulation (with ferric chloride) and electrocoagulation has been done. The comparison revealed that EC has better removal efficiency for As(III), whereas As(V) removal by both processes was nearly same. The removal mechanism of As(III) by EC seems to be oxidation of As(III) to As(V) and subsequent removal by adsorption/complexation with metal hydroxides generated in the process.     

Assessment of the pulp and paper mill effluent on growth,yield and nutrient quality of wheat (Triticum aestivum L.)

Assessment of agropotentiality of the effluent coming out from century pulp and paper mill, Ghanshyamdham, Lalkua (Uttaranchal) has been made on wheat (Triticum aestivum var. UP-2329) crop grown in two soils differing in texture with different effluent concentrations. Diluted effluent increased the chlorophyll content, plant height, shoot and root biomass, grain yield, protein, carbohydrate and lipid contents in wheat grains, while undiluted effluent caused inhibition in plant growth resulting in a sharp decline of yield. Pure soil provided better growth and yield results than those soil mixed with sand.     

Large inter annual variation in air quality during the annual festival ‘Diwali' in an Indian megacity

A network of air quality and weather monitoring stations was established under the System of Air Quality Forecasting and Research(SAFAR) project in Delhi. We report observations of ozone(O_3), nitrogen oxides(NO_x), carbon monoxide(CO) and particulate matter(PM_2.5and PM_(10)) before, during and after the Diwali in two consecutive years, i.e., November 2010 and October 2011. The Diwali days are characterised by large firework displays throughout India. The observations show that the background concentrations of particulate matter are between 5 and 10 times the permissible limits in Europe and the United States. During the Diwali-2010, the highest observed PM_(10) and PM_2.5mass concentration is as high as2070 μg/m~3 and 1620 μg/m3, respectively(24 hr mean), which was about 20 and 27 times to National Ambient Air Quality Standards(NAAQS). For Diwali-2011, the increase in PM_(10) and PM_2.5mass concentrations was much less with their peaks of 600 and of 390 μg/m~3 respectively, as compared to the background concentrations. Contrary to previous reports,firework display was not found to strongly influence the NO_x, and O_3 mixing ratios, with the increase within the observed variability in the background. CO mixing ratios showed an increase. We show that the large difference in 2010 and 2011 pollutant concentrations is controlled by weather parameters.     

Environmental quality assessment of Port Blair in Andaman islands

The Andman and Nicobar archipelago comprises of about 556 small and big islands covering an area of 8493 sq. kms in the Bay of Bengal. The very remoteness of these islands from the mainland has preserved their pristine environment and spectacular natural beauty. The Andman and Nicobar Administration is going for major developmental projects to cope with the increasing needs of the people, which ultimately results in significant changes in environmental quality. This paper describes the existing environmental quality around Port Blair city, which will give baseline scenario to assess the environmental impacts due to developments in the future.In order to monitor the air quality of the region, sampling stations were selected based on the locations of various industries and domestic activities. Suspended Particulate Matter (SPM), Sulphur dioxide (SO₂) and Nitrogen Oxides (NOx) were monitored for a period of one month during winter season. In addition, micrometeorological data, viz. wind speed and direction were also recorded and analysed to obtain the representative meteorological scenario of the air basin. The monitored values of ambient air quality was found to be within the NAAQ standards of India.Similarly, noise levels were also measured at various locations viz., residential areas, commercial centres, villages, stone quarry sites and construction sites. Noise levels were found to exceed the standards at stone quarry, construction sites and other locations.Water quality studies were carried out with respect to surface and ground water. The various physico- chemical and bacteriological parameters were analysed. It was observed that the physico-chemical parameters of surface and ground water lie within the standards stipulated for Indian subcontinent except for heavy metals which exceed the limits in ground water samples. Bacteriological analysis of sea water and ground water indicate that they are contaminated with faecal matters. Further, the ground water can be used for drinking purposes only after adequate treatment.     

Amelioration of Indian urban air pollution phytotoxicity in Beta vulgaris L. by modifying NPK nutrients

Air pollution levels are increasing at an alarming rate in many developing countries, including India and causing a potential threat to crop production. Field experiments were conducted to examine the impact of urban air pollutants on biomass (yield) and some physiological and biochemical parameters of palak (Beta vulgaris L. var. All Green) that grew from germination to maturity at seven periurban sites of Allahabad city having different concentrations of air pollutants under different levels of nutrients. The 6h daily mean NO2, SO2 and O3 concentrations varied from 2.5 to 42.5, 10.6 to 65 and 3.5 to 30.8 microg m(-3), respectively at different locations. Levels of air pollution showed significant negative correlations with photosynthetic pigments, protein, ascorbic acid and starch contents and catalase activity of palak leaves. A significant negative correlation was found for total biomass with SO2 (r=-0.92), NO2 (r=-0.85) and O3 (r=-0.91) concentrations. The increased fertilizer application (N, P and K) over the recommended dose resulted in a positive response by reducing losses in photosynthetic pigments and total biomass. This study proved that ambient air pollution of Allahabad city is influencing negatively to the growth and yield of palak plants.     

Three-dimensional laser machining of structural ceramics

Three- dimensional laser machining of structural ceramics such as alumina (Al₂O₃), silicon nitride (Si₃N₄), silicon carbide (SiC) and magnesia (MgO) was carried out using a 1.06 μm wavelength pulsed Nd:YAG laser. The rate of machining predicted in terms of material removed per unit time (mg/s) increased with an increase in heating rate (K/s). A thermal model based on temperature dependent absorptivity and thermophysical properties, in addition to conduction, convection and radiation based heat transfer, was developed to predict material removal rate. Predicted values were compared with actual measurements made from machined cavities. Such a study would enable advance predictions of the laser processing conditions required to machine cavities of desired dimensions.